CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    735 Articulated Truck
    View Product
    725 Articulated Truck
    View Product Remove
    730 Articulated Truck
    View Product Remove

    Engine
    Engine Model Cat® C13 Cat C9.3 Cat® C13
    Bore 5.1 in 4.5 in 5.1 in
    Stroke 6.2 in 45.2 in 6.2 in
    Displacement 736 in³ 567.5 in³ 762.8 in³
    Peak Engine Torque Net (SAE J1349) 1597 ft·lbf 1263 ft·lbf 1564 ft·lbf
    Peak Engine Torque Speed 1200 r/min 1200 r/min 1200 r/min
    Emissions The 735 meets Tier 4 Final and Stage V emission standards. The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. The 730 meets Tier 4 Final and Stage V emission standards.
    Peak Engine Torque Gross (SAE J1995) 1614 ft·lbf 1275 ft·lbf 1579 ft·lbf
    Note (3) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
    No Engine De-rating Below 12500 ft 3000 ft 12500 ft
    Note (2) The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
    Net Power - ISO 14396 429 HP - 370 HP
    Gross Power - SAE J1995 434 HP - 375 HP
    Note (5) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio - DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
    Note (4) Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
    Note (1) The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
    Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C13 - Cat C13
    Net Power - SAE J1349 424 HP - 367 HP
    Engine Model - U.S. EPA Tier 4 Final/EU Stage IV - Cat® C9.3 -

    Weights
    Rated Payload 35.3 ton (US) 26.5 ton (US) 31 ton (US)

    Body Capacities
    Heaped (SAE 2:1) 26.2 yd³ 19.6 yd³ 23 yd³
    Struck 20.3 yd³ 14.4 yd³ 17.4 yd³
    Tailgate Heaped SAE 2:1 27.9 yd³ 20.4 yd³ 24.6 yd³
    Tailgate Struck 21.3 yd³ 14.5 yd³ 18.2 yd³

    Transmission
    Forward - 1 5 mile/h 5 mT/hr 5 mile/h
    Forward - 2 9 mile/h 9.4 mT/hr 9 mile/h
    Forward - 3 14 mile/h 14.4 mT/hr 14 mile/h
    Forward - 4 22 mile/h 22.1 mT/hr 21 mile/h
    Forward - 5 30 mile/h 30.7 mT/hr 29 mile/h
    Forward - 6 35 mile/h 36.3 mT/hr 34 mile/h
    Reverse - 1 6 mile/h 5.5 mT/hr 6 mile/h

    Service Refill Capacities
    Fuel Tank 108.8 gal (US) 91 gal (US) 108.8 gal (US)
    Cooling System 21.9 gal (US) 18 gal (US) 21.9 gal (US)
    Hydraulic System 29.1 gal (US) 29.1 gal (US) 29.1 gal (US)
    Engine Crankcase 10 gal (US) 8 gal (US) 10 gal (US)
    Transmission 12.3 gal (US) 10 gal (US) 12.4 gal (US)
    Final Drives/Differential 33 gal (US) 33 gal (US) 33 gal (US)
    Output Transfer Gear Box 5.5 gal (US) 5 gal (US) 6.3 gal (US)
    DEF Tank 5.3 gal (US) - 5.3 gal (US)
    Steering/Hoist Hydraulic System - 24 gal (US) -
    Final Drive - Each - 1.6 gal (US) -

    Sound Levels
    Interior Cab 72 dB(A) 69 dB(A) 72 dB(A)
    Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
    Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the

    Body Hoist
    Raise Time 12 s 10 s 12 s
    Lower Time 11 s 8 s 8 s

    Standards
    Brakes ISO 3450 – 2011 ISO 3450 – 2011 ISO 3450 – 2011
    Cab - FOPS ISO 3449 Level II – 2005 ISO 3449 Level II – 2008 ISO 3449 Level II – 2005
    Cab - ROPS ISO 3471 – 2008 ISO 3471 – 2008 ISO 3471 – 2008
    Steering ISO 5010 – 2007 ISO 5010 – 2007 ISO 5010 – 2007

    Operating Weights
    Total - Loaded 126192 lb 103886 lb 114420 lb
    Front Axle - Empty 34128 lb 30974 lb 33069 lb
    Total - Rated Load 70548 lb 52910 lb 61729 lb
    Rear Axle - Loaded 41270 lb 33457 lb 36817 lb
    Rear Axle - Empty 10516 lb 9757 lb 9568 lb
    Center Axle - Empty 11001 lb 10242 lb 10053 lb
    Center Axle - Rated Load 30754 lb 23699 lb 27249 lb
    Front Axle - Loaded 43166 lb 36484 lb 40300 lb
    Total - Empty 55645 lb 50975 lb 52690 lb
    Front Axle - Rated Load 9039 lb 5511 lb 7231 lb
    Rear Axle - Rated Load 30754 lb 23699 lb 27249 lb
    Center Axle - Loaded 41756 lb 33944 lb 37302 lb

    Steering
    Lock to Lock 4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm 4.75 seconds @ 60 rpm

    Body Plate
    Type High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel High strength Brinell HB450 wear resistant steel

    Turning Circle
    Turning Dimensions - SAE Turning Radius 294 in 294 in 294 in
    Turning Dimensions - Inside Radius 149 in 153 in 153 in
    Turning Dimensions - Clearance Radius 318 in 318 in 318 in
    Note Dimensions are for machines equipped with 750/65 R25 tires. Dimensions are for machines equipped with 23.5R25 tires. Dimensions are for machines equipped with 23.5R25 tires.
    Turning Dimensions - Steer Angle - Left/Right 45° 45° 45°
    Turning Dimensions - Aisle Width 212 in 210 in 210 in

    Optimal Loader/Truck Pass Matching
    Hydraulic Excavators: 336F/336F XE - Passes 5–6 5-6 5–6
    Note An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased - An optimum system match gives you a major productivity advantage. The 730 is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased
    Hydraulic Excavators: 349F/349F XE - Passes 4–5 4-5 4–5
    Wheel Loaders: 972M/972M XE - Passes 3–4 3-4 3–4
    Wheel Loader: 962M - Passes 4–5 4-5 4–5
    Wheel Loader: 950M - Passes 5 5 5
    Wheel Loaders: 966M/966M XE - Passes 4 4 4

    Body Plate Thickness
    Base Plate 0.51 in 0.51 in 0.51 in
    Front Plate 0.28 in 0.28 in 0.28 in
    Side Plates 0.43 in 0.43 in 0.43 in
    Add a Similar Product:
    • 745 Articulated Truck Add
    • 740 EJ Articulated Truck Add
    • 740 GC Articulated Truck Add
    • 730 EJ Articulated Truck Add
    • 745 Bare Chassis Articulated Truck Add
    • 735 Bare Chassis Articulated Truck Add
    • 740 GC Bare Chassis Articulated Truck Add
    • 730 Bare Chassis Articulated Truck Add
    • 725 Bare Chassis Articulated Truck Add