CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    730 EJ Articulated Truck
    View Product
    740 EJ Articulated Truck
    View Product Remove

    Engine
    Engine Model Cat® C13 Cat® C18 -
    Bore 5.1 in 5.7 in -
    Stroke 6.2 in 7.2 in -
    Displacement 763 in³ 1106 in³ -
    Emissions The 730 EJ meets Tier 4 Final and Stage V emission standards. The 740 EJ meets Tier 4 Final and Stage V emission standards. -
    Note (4) Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions. DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio -
    Note (3) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. -
    Note (2) The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. -
    Note (1) The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. -
    Note (5) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio - -
    Peak Engine Torque Net (ISO 14396) 1564 ft·lbf - -
    No Engine De-rating Below 12500 ft - -
    Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C13 - -
    Peak Engine Torque Speed 1200 r/min 1200 r/min -
    Net Power - SAE J1349:2011 367 hp 496 hp -
    Gross Power - SAE J1995:2014 375 hp 511 hp -
    Peak Engine Torque Gross (SAE J1995) 1579 ft·lbf 1931 ft·lbf -
    Net Power - ISO 14396 370 hp 504 hp -
    Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final - Cat C18 -
    Peak Engine Torque Net (SAE J1349) - 1887 ft·lbf -
    No Engine De-rating Required Below - 10000 ft -

    Weights
    Rated Payload 30 ton (US) 42 ton (US) -

    Body Capacities
    Heaped (SAE 2:1) 22.1 yd³ 30.1 yd³ -
    Struck 17.7 yd³ 23.5 yd³ -

    Transmission
    Forward - 1 5 mile/h 3.8 mile/h -
    Forward - 2 9 mile/h 5 mile/h -
    Forward - 3 14 mile/h 7 mile/h -
    Forward - 4 21 mile/h 8.8 mile/h -
    Forward - 5 29 mile/h 11.6 mile/h -
    Forward - 6 34 mile/h 14.2 mile/h -
    Reverse - 1 6 mile/h 4 mile/h -
    Forward - 7 - 19.6 mile/h -
    Forward - 8 - 23.5 mile/h -
    Reverse - 2 - 9.1 mile/h -
    Forward - 9 - 34 mile/h -

    Service Refill Capacities
    Fuel Tank 108.8 gal (US) 145.3 gal (US) -
    Cooling System 21.9 gal (US) 23.7 gal (US) -
    Hydraulic System 29.1 gal (US) - -
    Engine Crankcase 10 gal (US) 13.7 gal (US) -
    Transmission 12.4 gal (US) - -
    Final Drives/Differential 33 gal (US) - -
    Output Transfer Gear Box 6.3 gal (US) - -
    DEF Tank 5.3 gal (US) 5.3 gal (US) -
    Steering/Hoist Hydraulic System - 36.9 gal (US) -
    Transmission - OTG - 19.8 gal (US) -
    Axles - Each - 15.8 gal (US) -
    Final Drive - Each - 1.3 gal (US) -
    Brake Cooling Tank - 17.7 gal (US) -

    Sound Levels
    Interior Cab 72 dB(A) 72 dB(A) -
    Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. -
    Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the -

    Standards
    Brakes ISO 3450 – 2011 ISO 3450 – 2011 -
    Cab - FOPS ISO 3449 Level II – 2005 ISO 3449 Level II – 2005 -
    Cab - ROPS ISO 3471 – 2008 ISO 3471 – 2008 -
    Steering ISO 5010 – 2007 ISO 5010 – 2007 -

    Operating Weights
    Front Axle - Rated Load 1433 lb 3534 lb -
    Total - Loaded 117528 lb 162399 lb -
    Center Axle - Loaded 41502 lb 57214 lb -
    Rear Axle - Empty 11707 lb 16515 lb -
    Rear Axle - Rated Load 29156 lb 40120 lb -
    Front Axle - Loaded 35009 lb 48548 lb -
    Center Axle - Empty 12214 lb 17095 lb -
    Total - Rated Load 59745 lb 83776 lb -
    Front Axle - Empty 34723 lb 44849 lb -
    Total - Empty 58643 lb 78623 lb -
    Rear Axle - Loaded 41017 lb 56637 lb -
    Center Axle - Rated Load 29156 lb 40120 lb -

    Steering
    Lock to Lock 4.75 seconds @ 60 rpm 4.8 seconds @ 60 rpm -

    Body Plate
    Type High strength Brinell HB450 wear resistant steel High Strength Brinell HB450 Wear Resistant Steel -
    Chute - 0.55 in -
    Front - 0.28 in -
    Side - 0.43 in -
    Base - 0.55 in -

    Turning Circle
    Turning Dimensions - Clearance Radius 318 in 356 in -
    Turning Dimensions - SAE Turning Radius 294 in 339 in -
    Turning Dimensions - Steer Angle - Left/Right 45° 45 deg -
    Turning Dimensions - Inside Radius 152 in 173 in -
    Turning Dimensions - Aisle Width 214 in 233 in -
    Note Dimensions are for machines equipped with 750/65 R25 tires. Dimensions are for machines equipped with 29.5R25 tires. -

    Optimal Loader/Truck Pass Matching
    Hydraulic Excavators: 336F/336F XE - Passes 5–6 - -
    Note An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increas An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. -
    Hydraulic Excavators: 349F/349F XE - Passes 4–5 - -
    Wheel Loaders: 966M/966M XE - Passes 4 - -
    Wheel Loaders: 972M/972M XE - Passes 3–4 - -
    Wheel Loader: 962M - Passes 4–5 - -
    Wheel Loader: 950M - Passes 5 - -
    Wheel Loader: 972 - Passes - 4–5 -
    Wheel Loader: 982 - Passes - 4 -
    Hydraulic Excavator: 374 - Passes - 5 -
    Hydraulic Excavator: 390 - Passes - 4 -
    Wheel Loader: 980 - Passes - 4–5 -

    Eject/Retract Times
    Retract Time 15 s - -
    Eject Time 12 s - -

    Blade Eject/Retract
    Retract (manual) - 21 s -
    Eject (manual) - 17 s -
    Eject (automatic) - 16 s -
    Retract (automatic) - 21 s -
    Add a Similar Product:
    • 745 Articulated Truck Add
    • 740 GC Articulated Truck Add
    • 735 Articulated Truck Add
    • 730 Articulated Truck Add
    • 725 Articulated Truck Add
    • 740 GC Bare Chassis Articulated Truck Add
    • 745 Bare Chassis Articulated Truck Add
    • 730 Bare Chassis Articulated Truck Add
    • 735 Bare Chassis Articulated Truck Add
    • 725 Bare Chassis Articulated Truck Add