Compare Equipment Go Back
 730 EJ Articulated Truck |
 730 Bare Chassis Articulated Truck |
|
|
Engine |
|||
|---|---|---|---|
| Engine Model | Cat® C13 | Cat® C13 | - |
| Bore | 5.1 in | 5.1 in | - |
| Stroke | 6.2 in | 6.2 in | - |
| Displacement | 763 in³ | 762.8 in³ | - |
| Emissions | The 730 EJ meets Tier 4 Final and Stage V emission standards. | - | - |
| Note (4) | Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions. | - | - |
| Note (3) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. | - | - |
| Note (2) | The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. | - | - |
| Note (1) | The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. | - | - |
| Note (5) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio | - | - |
| Peak Engine Torque Net (ISO 14396) | 1564 ft·lbf | - | - |
| No Engine De-rating Below | 12500 ft | - | - |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage V | Cat C13 | - | - |
| Peak Engine Torque Speed | 1200 r/min | 1200 r/min | - |
| Net Power - SAE J1349:2011 | 367 hp | 367 hp | - |
| Gross Power - SAE J1995:2014 | 375 hp | 375 hp | - |
| Peak Engine Torque Gross (SAE J1995) | 1579 ft·lbf | 1579 lb/ft | - |
| Net Power - ISO 14396 | 370 hp | 370 hp | - |
| Peak Engine Torque Net (SAE J1349) | - | 1554 ft·lbf | - |
| No Engine De-rating Required Below | - | 12500 ft | - |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | - | Cat® C13 | - |
Weights |
|||
| Rated Payload | 30 ton (US) | 38.9 ton (US) | - |
Body Capacities |
|||
| Heaped (SAE 2:1) | 22.1 yd³ | - | - |
| Struck | 17.7 yd³ | - | - |
Transmission |
|||
| Forward - 1 | 5 mile/h | 5 mile/h | - |
| Forward - 2 | 9 mile/h | 9 mile/h | - |
| Forward - 3 | 14 mile/h | 14 mile/h | - |
| Forward - 4 | 21 mile/h | 21 mile/h | - |
| Forward - 5 | 29 mile/h | 29 mile/h | - |
| Forward - 6 | 34 mile/h | 34 mile/h | - |
| Reverse - 1 | 6 mile/h | 6 mile/h | - |
Service Refill Capacities |
|||
| Fuel Tank | 108.8 gal (US) | 108.8 gal (US) | - |
| Cooling System | 21.9 gal (US) | 21.9 gal (US) | - |
| Hydraulic System | 29.1 gal (US) | 29.1 gal (US) | - |
| Engine Crankcase | 10 gal (US) | 10 gal (US) | - |
| Transmission | 12.4 gal (US) | 12.4 gal (US) | - |
| Final Drives/Differential | 33 gal (US) | 33 gal (US) | - |
| Output Transfer Gear Box | 6.3 gal (US) | 6.3 gal (US) | - |
| DEF Tank | 5.3 gal (US) | 5.3 gal (US) | - |
Sound Levels |
|||
| Interior Cab | 72 dB(A) | 72 dB(A) | - |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. | - | - |
| Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the | - | - |
Standards |
|||
| Brakes | ISO 3450 – 2011 | ISO 3450:2011 | - |
| Cab - FOPS | ISO 3449 Level II – 2005 | ISO 3449:2005 Level II | - |
| Cab - ROPS | ISO 3471 – 2008 | ISO 3471:2008 | - |
| Steering | ISO 5010 – 2007 | ISO 5010:2019 | - |
Operating Weights |
|||
| Front Axle - Rated Load | 1433 lb | - | - |
| Total - Loaded | 117528 lb | - | - |
| Center Axle - Loaded | 41502 lb | - | - |
| Rear Axle - Empty | 11707 lb | - | - |
| Rear Axle - Rated Load | 29156 lb | - | - |
| Front Axle - Loaded | 35009 lb | - | - |
| Center Axle - Empty | 12214 lb | - | - |
| Total - Rated Load | 59745 lb | - | - |
| Front Axle - Empty | 34723 lb | - | - |
| Total - Empty | 58643 lb | - | - |
| Rear Axle - Loaded | 41017 lb | - | - |
| Center Axle - Rated Load | 29156 lb | - | - |
Steering |
|||
| Lock to Lock | 4.75 seconds @ 60 rpm | 4.75 seconds @ 60 rpm | - |
Body Plate |
|||
| Type | High strength Brinell HB450 wear resistant steel | - | - |
Turning Circle |
|||
| Turning Dimensions - Clearance Radius | 318 in | 318 in | - |
| Turning Dimensions - SAE Turning Radius | 294 in | 294 in | - |
| Turning Dimensions - Steer Angle - Left/Right | 45° | 45 ° | - |
| Turning Dimensions - Inside Radius | 152 in | 153 in | - |
| Turning Dimensions - Aisle Width | 214 in | 210 in | - |
| Note | Dimensions are for machines equipped with 750/65 R25 tires. | Dimensions are for machines equipped with 23.5 R25 tires. | - |
Optimal Loader/Truck Pass Matching |
|||
| Hydraulic Excavators: 336F/336F XE - Passes | 5–6 | - | - |
| Note | An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increas | - | - |
| Hydraulic Excavators: 349F/349F XE - Passes | 4–5 | - | - |
| Wheel Loaders: 966M/966M XE - Passes | 4 | - | - |
| Wheel Loaders: 972M/972M XE - Passes | 3–4 | - | - |
| Wheel Loader: 962M - Passes | 4–5 | - | - |
| Wheel Loader: 950M - Passes | 5 | - | - |
Eject/Retract Times |
|||
| Retract Time | 15 s | - | - |
| Eject Time | 12 s | - | - |
Wheel Base Length |
|||
| Standard Wheel Base | - | 156.7 in | - |
| Long Wheel Base | - | 215.2 in | - |
Add a Similar Product:
-
745 Articulated Truck Add
-
740 GC Articulated Truck Add
-
735 Articulated Truck Add
-
740 EJ Articulated Truck Add
-
730 Articulated Truck Add
-
725 Articulated Truck Add
-
740 GC Bare Chassis Articulated Truck Add
-
745 Bare Chassis Articulated Truck Add
-
735 Bare Chassis Articulated Truck Add
-
725 Bare Chassis Articulated Truck Add