CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    725 Articulated Truck
    View Product
    740 GC Bare Chassis Articulated Truck
    View Product Remove

    Engine
    Engine Model Cat C9.3 Cat® C15 -
    Bore 4.5 in 5.4 in -
    Stroke 45.2 in 6.75 in -
    Displacement 567.5 in³ 926 in³ -
    Peak Engine Torque Gross (SAE J1995) 1275 ft·lbf 1711 lb/ft -
    Engine Model - U.S. EPA Tier 4 Final/EU Stage IV Cat® C9.3 - -
    No Engine De-rating Below 3000 ft - -
    Peak Engine Torque Net (SAE J1349) 1263 ft·lbf 1670 lb/ft -
    Peak Engine Torque Speed 1200 r/min 1200 r/min -
    Note (1) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. - -
    Emissions The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. - -
    Note (3) Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions. - -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. - -
    Note (4) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio - -
    Gross Power - SAE J1995 - 452 HP -
    Net Power - SAE J1349 - 439 HP -
    Net Power - ISO 14396 - 447 HP -
    Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final - Cat® C15 -
    No Engine De-rating Required Below - 10000 ft -

    Weights
    Rated Payload 26.5 ton (US) 49.2 ton (US) -

    Body Capacities
    Heaped (SAE 2:1) 19.6 yd³ - -
    Struck 14.4 yd³ - -
    Tailgate Heaped SAE 2:1 20.4 yd³ - -
    Tailgate Struck 14.5 yd³ - -

    Transmission
    Forward - 1 5 mT/hr 4 mile/h -
    Forward - 2 9.4 mT/hr 5.3 mile/h -
    Forward - 3 14.4 mT/hr 7.3 mile/h -
    Forward - 4 22.1 mT/hr 9.2 mile/h -
    Forward - 5 30.7 mT/hr 12.2 mile/h -
    Forward - 6 36.3 mT/hr 14.9 mile/h -
    Reverse - 1 5.5 mT/hr 4.2 mile/h -
    Forward - 7 - 20.6 mile/h -
    Forward - 8 - 24.7 mile/h -
    Forward - 9 - 35.7 mile/h -
    Reverse - 2 - 9.8 mile/h -

    Service Refill Capacities
    Fuel Tank 91 gal (US) 143.5 gal (US) -
    Cooling System 18 gal (US) 23.7 gal (US) -
    Hydraulic System 29.1 gal (US) - -
    Engine Crankcase 8 gal (US) 13.7 gal (US) -
    Transmission 10 gal (US) - -
    Final Drives/Differential 33 gal (US) - -
    Output Transfer Gear Box 5 gal (US) - -
    Steering/Hoist Hydraulic System 24 gal (US) 36.9 gal (US) -
    Final Drive - Each 1.6 gal (US) 1.3 gal (US) -
    Brake Cooling Tank - 17.7 gal (US) -
    Transmission - OTG - 19.8 gal (US) -
    Axles - Each - 15.8 gal (US) -
    DEF Tank - 25 gal (US) -

    Sound Levels
    Interior Cab 69 dB(A) 72 dB(A) -
    Note (1) The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f - -
    Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. - -

    Body Hoist
    Raise Time 10 s - -
    Lower Time 8 s - -

    Standards
    Brakes ISO 3450 – 2011 ISO 3450:2011 -
    Cab - FOPS ISO 3449 Level II – 2008 ISO 3449:2005 Level II -
    Cab - ROPS ISO 3471 – 2008 ISO 3471:2008 -
    Steering ISO 5010 – 2007 ISO 5010:2019 -

    Operating Weights
    Total - Loaded 103886 lb - -
    Rear Axle - Rated Load 23699 lb - -
    Total - Empty 50975 lb - -
    Total - Rated Load 52910 lb - -
    Center Axle - Loaded 33944 lb - -
    Front Axle - Rated Load 5511 lb - -
    Center Axle - Rated Load 23699 lb - -
    Center Axle - Empty 10242 lb - -
    Rear Axle - Loaded 33457 lb - -
    Front Axle - Loaded 36484 lb - -
    Rear Axle - Empty 9757 lb - -
    Front Axle - Empty 30974 lb - -

    Body Plate Thickness
    Side Plates 0.43 in - -
    Front Plate 0.28 in - -
    Base Plate 0.51 in - -

    Steering
    Lock to Lock 4.75 seconds @ 60 rpm 4.75 seconds at 60 rpm -

    Body Plate
    Type High strength Brinell HB450 wear resistant steel - -

    Turning Circle
    Turning Dimensions - Inside Radius 153 in 156 in -
    Turning Dimensions - Aisle Width 210 in 220 in -
    Turning Dimensions - SAE Turning Radius 294 in 303 in -
    Turning Dimensions - Clearance Radius 318 in 330 in -
    Turning Dimensions - Steer Angle - Left/Right 45° 45° -
    Note Dimensions are for machines equipped with 23.5R25 tires. Dimensions are for machines equipped with 29.5 R25 tires. -

    Optimal Loader/Truck Pass Matching
    Wheel Loader: 950M - Passes 5 - -
    Wheel Loader: 962M - Passes 4-5 - -
    Wheel Loaders: 966M/966M XE - Passes 4 - -
    Hydraulic Excavators: 336F/336F XE - Passes 5-6 - -
    Wheel Loaders: 972M/972M XE - Passes 3-4 - -
    Hydraulic Excavators: 349F/349F XE - Passes 4-5 - -

    Wheel Base Length
    Standard Wheel Base - 162.4 in -
    Add a Similar Product:
    • 745 Articulated Truck Add
    • 740 EJ Articulated Truck Add
    • 740 GC Articulated Truck Add
    • 730 EJ Articulated Truck Add
    • 735 Articulated Truck Add
    • 730 Articulated Truck Add
    • 745 Bare Chassis Articulated Truck Add
    • 730 Bare Chassis Articulated Truck Add
    • 735 Bare Chassis Articulated Truck Add
    • 725 Bare Chassis Articulated Truck Add