Compare Equipment Go Back
 374 Hydraulic Excavator |
 M316 Wheeled Excavator |
 M320 Wheeled Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 484 HP | 141 HP | 171 HP |
| Net Power - ISO 9249 (DIN) | 491 hp (metric) | 143 hp (metric) | 174 hp (metric) |
| Engine Model | Cat C15 | Cat C4.4 | C4.4 |
| Engine Power - ISO 14396 | 485 HP | 148 HP | 174 HP |
| Engine Power - ISO 14396 (DIN) | 492 hp (metric) | 150 hp (metric) | 176 hp (metric) |
| Bore | 5.4 in | 4 ft | 4 in |
| Stroke | 6.7 in | - | 5.3 in |
| Displacement | 928 in³ | 268.5 in³ | 268.5 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 162900 lb | - | - |
| Note | Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. | - | - |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 28.1 ft | - | - |
| Boom | Reach 7.8m (25'7") | - | - |
| Stick | R3.6m (11'10") | - | - |
| Bucket | SD 3.3 m³ (4.32 yd³) | - | - |
| Maximum Reach at Ground Level | 43.2 ft | - | - |
| Maximum Cutting Height | 41.2 ft | - | - |
| Maximum Loading Height | 27.7 ft | - | - |
| Minimum Loading Height | 10.1 ft | - | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 27.8 ft | - | - |
| Maximum Vertical Wall Digging Depth | 22.8 ft | - | - |
| Bucket Digging Force - ISO | 80550 ft·lbf | - | - |
| Stick Digging Force - ISO | 66390 ft·lbf | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 237 gal/min | 73 gal/min | 81 gal/min |
| Maximum Pressure - Equipment | 5366 psi | 5076 psi | 5366 psi |
| Maximum Pressure - Equipment - Lift Mode | 5511 psi | - | - |
| Maximum Pressure - Travel | 5076 psi | 5076 psi | 5076 gal/min |
| Maximum Pressure - Swing | 5076 psi | 5076 psi | 5729 gal/min |
Swing Mechanism |
|||
| Swing Speed | 6.34 r/min | 10.2 r/min | 9.2 r/min |
| Maximum Swing Torque | 220000 ft·lbf | 32560 ft·lbf | 37000 ft·lbf |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 243 gal (US) | - | - |
| Cooling System | 19 gal (US) | 6.3 gal (US) | 8.4 gal (US) |
| Engine Oil | 16 gal (US) | - | - |
| Swing Drive | 5 gal (US) | - | - |
| Final Drive - Each | 9 gal (US) | - | - |
| Hydraulic System - Including Tank | 164 gal (US) | 68.7 gal (US) | 71.3 gal (US) |
| Hydraulic Tank | 86 gal (US) | 31.7 gal (US) | 40.9 gal (US) |
| DEF Tank | 21 gal (US) | - | - |
| Final Drive | - | 0.7 gal (US) | 0.7 gal (US) |
| Fuel Tank | - | 92.5 gal (US) | 124.2 gal (US) |
| Diesel Exhaust Fluid (DEF) | - | - | 7.9 gal (US) |
Dimensions |
|||
| Boom | Reach 7.8m (25'7") | 5205 mm (17' 1") | 5260 mm (17'3") |
| Stick | R3.6m (11'10") | 2.5 m (8' 2") | 2.5 m (8' 2") |
| Bucket | SD 3.3 m³ (4.32 yd³) | GD 0.8 m3 (1.05 yd3) | 0.98 m³ GD (1.28 yd³) |
| Shipping Height - Top of Cab | 11.8 ft | 10.5 ft | 11 ft |
| Handrail Height | 13 ft | - | - |
| Shipping Length | 44.9 ft | 8630 ft | 29.3 ft |
| Tail Swing Radius | 13.8 ft | 7.7 ft | 8.5 ft |
| Counterweight Clearance | 4.1 ft | 4.3 ft | 4.3 ft |
| Ground Clearance | 2.6 ft | 1.3 ft | 1.4 ft |
| Track Length | 19.3 ft | - | - |
| Track Length to Center of Rollers | 15.5 ft | - | - |
| Track Gauge | 11.2 ft | - | - |
| Transport Width | 11.1 ft | - | - |
| Note | Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps | - | - |
| Support Point | - | 12.7 ft | 11.8 ft |
| Undercarriage Length | - | 16.3 ft | - |
| Wheel Base | - | 8.4 ft | 8.9 ft |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). | - | - |
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Machine Weight |
|||
| Operating Weight Maximum | - | 36400 lb | 46740 lb |
| Note (1) | - | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - |
| Operating Weight Minimum | - | - | 41450 lb |
Drive |
|||
| Maximum Travel Speed | - | 21.7 mile/h | - |
Working Ranges and Forces |
|||
| Boom Type | - | VA Boom | VA Boom |
| Bucket | - | GD 0.8 m3 (1.05 yd3) | 0.98 m³ GD (1.28 yd³) |
| Stick | - | R2.5 (8' 2") | 2.5 m (8' 2") |
| Cutting Height | - | 33.2 ft | 32.6 ft |
| Reach at Ground Level | - | 29.4 ft | 30.5 ft |
| Vertical Wall Digging Depth | - | 14.5 mm | 13.9 ft |
| Digging Height | - | 18.5 ft | - |
| Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). |
| Bucket Forces (ISO) | - | - | 30799 lbf |
| Stick Forces (ISO) | - | - | 20682 lbf |
Transmission |
|||
| Maximum Travel Speed | - | - | 21.7 mile/h |
Add a Similar Product:
-
M322 Add
-
M318 Wheeled Excavator Add
-
M319 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
M314 Wheeled Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
395 Excavator Add
-
340 Hydraulic Excavator Add