Compare Equipment Go Back
 317 GC Hydraulic Excavator |
 M322 |
 M314 Wheeled Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 119 HP | 171 HP | 134 HP |
| Engine Model | Cat C3.6 | C 7.1 | Cat C3.6 |
| Engine Power - ISO 14396 | 121 HP | 174 HP | 134 HP |
| Engine Power - ISO 14396 (DIN) | 122 hp (metric) | 176 hp (metric) | 136 hp (metric) |
| Net Power - ISO 9249 (DIN) | 121 hp (metric) | 174 hp (metric) | 129 hp (metric) |
| Bore | 4 in | 4.1 in | 3.9 in |
| Stroke | 5 in | 5.3 in | 5 in |
| Displacement | 220 in³ | 427.8 in² | 221 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 38000 lb | - | - |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 21 ft | - | - |
| Boom | Reach 5.1 m (16'9") | - | - |
| Stick | Reach R2.9 m (9'6") | - | - |
| Bucket | GD 0.76 m³ (0.99 yd³) | - | - |
| Maximum Reach at Ground Level | 29.6 ft | - | - |
| Maximum Cutting Height | 29.1 ft | - | - |
| Maximum Loading Height | 20.6 ft | - | - |
| Minimum Loading Height | 6.5 ft | - | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 20.2 ft | - | - |
| Maximum Vertical Wall Digging Depth | 16.3 ft | - | - |
| Minimum Working Equipment Radius | 9.6 ft | - | - |
| Bucket Digging Force - ISO | 27650 lbf | - | - |
| Stick Digging Force - ISO | 16860 lbf | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow | 296 L/min (78 gal/min) | - | - |
| Maximum Pressure - Equipment | 5076 psi | - | 5076 psi |
| Maximum Pressure - Travel | 5076 psi | - | 5076 psi |
| Maximum Pressure - Swing | 3741 psi | - | 5149 psi |
| Main System - Maximum Flow - Implement | - | 95 gal/min | 71 gal/min |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - |
| Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - |
Swing Mechanism |
|||
| Swing Speed | 8.7 r/min | - | 9.1 r/min |
| Maximum Swing Torque | 44991 ft·lbf | - | 28860 ft·lbf |
| Swing Torque | - | 44250 lb/ft | - |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 71.6 gal (US) | - | - |
| Cooling System | 5.8 gal (US) | - | 6.3 gal (US) |
| Engine Oil | 2.9 gal (US) | 3.4 gal (US) | - |
| Final Drive - Each | 1.6 gal (US) | - | - |
| Hydraulic System - Including Tank | 24.8 gal (US) | 71.3 gal (US) | 58.1 gal (US) |
| Hydraulic Tank | 23 gal (US) | - | 23.8 gal (US) |
| DEF Tank | 5.9 gal (US) | - | - |
| Fuel Tank | - | 124.2 gal (US) | 77.9 gal (US) |
| Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | 5.3 gal (US) |
| Final Drive | - | - | 0.6 gal (US) |
Dimensions |
|||
| Boom | Reach 5.1 m (16'9") | VA 5.4m (17'10") | 5m (16' 6") |
| Stick | Reach R2.9 m (9'6") | 2.9m (9'2") | 2.2m (7' 3") |
| Bucket | GD 0.76 m³ (0.99 yd³) | - | 0.76m3 (.78 yd3) |
| Shipping Height - Top of Cab | 9.6 ft | - | 3315 ft |
| Handrail Height | 9.6 ft | - | - |
| Shipping Length | 28.1 ft | 31.1 ft | 26.9 ft |
| Tail Swing Radius | 8.2 ft | 9.2 ft | 7.1 ft |
| Counterweight Clearance | 3.3 ft | 4.3 ft | 4.1 ft |
| Ground Clearance | 1.4 ft | 1.25 ft | 1.1 ft |
| Track Length | 13 ft | - | - |
| Length to Center of Rollers | 10.4 ft | - | - |
| Track Gauge | 6.5 ft | - | - |
| Transport Width | 8.5 ft | - | - |
| Shipping Height with Falling Object Guard | - | 11 ft | - |
| Support Point | - | 11.3 ft | - |
| Wheel Base | - | 9 ft | 8.2 ft |
| Undercarriage Length | - | - | 16.1 ft |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. | - | - |
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Machine Weight |
|||
| Operating Weight Maximum | - | 52911 lb | 39683 lb |
| Operating Weight Minimum | - | 44750 lb | 33069 lb |
| Note (1) | - | - | Typical configurations include medium stick, 2600 kg (5,732 lb) counterweight, full fuel tank, operator, quick coupler (210 kg/463 lb), bucket (500 kg/1,102 lb) and dual pneumatic tires. |
Transmission |
|||
| Forward/Reverse - 2nd Gear | - | 18.6 mile/h | - |
| Forward/Reverse - 1st Gear | - | 5.6 mile/h | - |
| Creeper Speed - 1st Gear | - | 3.4 mile/h | - |
| Creeper Speed - 2nd Gear | - | 9.3 mile/h | - |
| Drawbar Pull | - | 28551 lbf | - |
| Maximum Gradeability | - | 70% | - |
Working Ranges and Forces |
|||
| Boom Type | - | VA 5.4m (17'10") | VA Boom |
| Stick | - | 2.9m (9'2") | R2.2CB (7' 3") |
| Bucket | - | GD 1.2 m³ (1.7 yd³) | 0.76m3 (0.99 y3) GD |
| Maximum Loading Height | - | 24.7 ft | - |
| Maximum Digging Depth | - | 21.8 ft | - |
| Reach at Ground Level | - | 33.4 ft | 28.4 ft |
| Vertical Wall Digging Depth | - | 17.3 ft | 13.9 ft |
| Bucket Forces (ISO) | - | 33946 lbf | - |
| Stick Forces (ISO) | - | 23605 lbf | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 21.6 ft | - |
| Digging Height | - | - | 17.4 ft |
| Dump Height | - | - | 23 ft |
| Note (1) | - | - | Range values are calculated with a tip radius of 1387 mm (4' 6"). CW-type bucket (358-8665, GD, 1000 mm/3' 3", 0.6 m³/0.78 yd³, with Advansys 70 tips) and CW-20S-D.4.N quick coupler. Breakout force values are calculated with a tip radius of 1224 mm (4') a |
working Ranges and Forces |
|||
| Cutting Height | - | 35.8 ft | - |
Drive |
|||
| Maximum Travel Speed | - | - | 23 mile/h |
Sustainability |
|||
| Recyclability | - | - | 91% |
Add a Similar Product:
-
M319 Wheeled Excavator Add
-
M320 Wheeled Excavator Add
-
M316 Wheeled Excavator Add
-
M318 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
M315 Wheeled Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
374 Hydraulic Excavator Add
-
395 Excavator Add