Compare Equipment Go Back
317 GC Hydraulic Excavator |
M322 |
M315 Wheeled Excavator |
352 LRE Long Reach Excavation Hydraulic Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 119 HP | 171 HP | 145 HP | 424 HP |
Engine Model | Cat C3.6 | C 7.1 | C4.4 | Cat C13 |
Engine Power - ISO 14396 | 121 HP | 174 HP | 148 HP | 425 HP |
Engine Power - ISO 14396 (DIN) | 122 hp (metric) | 176 hp (metric) | 150 hp (metric) | 431 hp (metric) |
Net Power - ISO 9249 (DIN) | 121 hp (metric) | 174 hp (metric) | 147 hp (metric) | 429.9 hp (metric) |
Bore | 4 in | 4.1 in | 4.1 in | 5 in |
Stroke | 5 in | 5.3 in | 127 mm | 6 in |
Displacement | 220 in³ | 427.8 in² | 268.5 in³ | 763 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 38000 lb | - | - | 128800 lb |
Note | - | - | - | Variable Gauge High Wide undercarriage, LRE boom, LRE 8.5B (27'9") stick, HD 1.19 m³ (1.56 yd³) bucket, 900 mm (35") triple grouser shoes, 12.0 mt (26,455 lb) counterweight. |
Working Ranges & Forces |
||||
Maximum Digging Depth | 21 ft | - | - | 42.8 ft |
Boom | Reach 5.1 m (16'9") | - | - | LRE Boom 11.5 m (37'9") |
Stick | Reach R2.9 m (9'6") | - | - | LRE Stick 8.5 m (27'11') |
Bucket | GD 0.76 m³ (0.99 yd³) | - | - | HD 1.19 m³ (1.56 yd³) |
Maximum Reach at Ground Level | 29.6 ft | - | - | 64.4 ft |
Maximum Cutting Height | 29.1 ft | - | - | 48.2 ft |
Maximum Loading Height | 20.6 ft | - | - | 39.4 ft |
Minimum Loading Height | 6.5 ft | - | - | 7.3 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 20.2 ft | - | - | 42.5 ft |
Maximum Vertical Wall Digging Depth | 16.3 ft | - | - | - |
Minimum Working Equipment Radius | 9.6 ft | - | - | - |
Bucket Digging Force - ISO | 27650 lbf | - | - | 31700 lbf |
Stick Digging Force - ISO | 16860 lbf | - | - | 23380 lbf |
Hydraulic System |
||||
Main System - Maximum Flow | 296 L/min (78 gal/min) | - | - | - |
Maximum Pressure - Equipment | 5076 psi | - | - | 5076 psi |
Maximum Pressure - Travel | 5076 psi | - | - | 5076 psi |
Maximum Pressure - Swing | 3741 psi | - | - | 3771 psi |
Main System - Maximum Flow - Implement | - | 95 gal/min | 73 gal/min | - |
Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | 5076 psi | - |
Maximum Flow - Main System | - | - | - | 206 gal/min |
Maximum Pressure - Equipment - Lift Mode | - | - | - | 5511 psi |
Swing Mechanism |
||||
Swing Speed | 8.7 r/min | - | 9.1 r/min | - |
Maximum Swing Torque | 44991 ft·lbf | - | 30340 ft·lbf | 138000 ft·lbf |
Swing Torque | - | 44250 lb/ft | - | - |
Service Refill Capacities |
||||
Fuel Tank Capacity | 71.6 gal (US) | - | - | 188.9 gal (US) |
Cooling System | 5.8 gal (US) | 10.6 gal (US) | 24 l | 13.7 gal (US) |
Engine Oil | 2.9 gal (US) | 3.4 gal (US) | - | - |
Final Drive - Each | 1.6 gal (US) | - | - | 2.5 gal (US) |
Hydraulic System - Including Tank | 24.8 gal (US) | 71.3 gal (US) | 58.1 gal (US) | 145.3 gal (US) |
Hydraulic Tank | 23 gal (US) | 52.8 gal (US) | 23.8 gal (US) | 57.3 gal (US) |
DEF Tank | 5.9 gal (US) | - | - | 12.2 gal (US) |
Fuel Tank | - | 124.2 gal (US) | 74 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | 5.3 gal (US) | - |
Engine Oil - With Filter | - | - | - | 10.6 gal (US) |
Swing Drive | - | - | - | 2.8 gal (US) |
Dimensions |
||||
Boom | Reach 5.1 m (16'9") | VA 5.4m (17'10") | VA 5.2 m (17'1") | LRE Boom 11.5 m (37'9") |
Stick | Reach R2.9 m (9'6") | 2.9m (9'2") | 2.5m (8'2") | LRE Stick 8.5 m (27'11') |
Bucket | GD 0.76 m³ (0.99 yd³) | - | GD 0.76 m³ (0.99 yd³ ) | HD 1.19 m³ (1.56 yd³) |
Shipping Height - Top of Cab | 9.6 ft | - | 10.9 ft | 11.1 ft |
Handrail Height | 9.6 ft | - | - | 11.6 ft |
Shipping Length | 28.1 ft | 31.1 ft | 25.1 ft | 54 ft |
Tail Swing Radius | 8.2 ft | 9.2 ft | 5.9 ft | 12.3 ft |
Counterweight Clearance | 3.3 ft | 4.3 ft | 4.2 ft | 4.7 ft |
Ground Clearance | 1.4 ft | 1.25 ft | 1.5 ft | 2.3 ft |
Track Length | 13 ft | - | - | 17.6 ft |
Length to Center of Rollers | 10.4 ft | - | - | - |
Track Gauge | 6.5 ft | - | - | 10.6 ft |
Transport Width | 8.5 ft | - | - | 13.6 ft |
Shipping Height with Falling Object Guard | - | 11 ft | - | - |
Support Point | - | 11.3 ft | 10.1 ft | - |
Wheel Base | - | 9 ft | 8.4 ft | - |
Undercarriage Length | - | - | 16 ft | - |
Track Length to Center of Rollers | - | - | - | 14.2 ft |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - |
Machine Weight |
||||
Operating Weight Maximum | - | 52911 lb | 39680 lb | - |
Operating Weight Minimum | - | 44750 lb | 34610 lb | - |
Transmission |
||||
Forward/Reverse - 2nd Gear | - | 18.6 mile/h | 21.7 mile/h | - |
Forward/Reverse - 1st Gear | - | 5.6 mile/h | 6.2 mile/h | - |
Creeper Speed - 1st Gear | - | 3.4 mile/h | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | 9.3 mile/h | 9.3 mile/h | - |
Drawbar Pull | - | 28551 lbf | 23380 lbf | - |
Maximum Gradeability | - | 70% | - | - |
Maximum Travel Speed | - | - | 21.7 mile/h | - |
Working Ranges and Forces |
||||
Boom Type | - | VA 5.4m (17'10") | VA 5.2 m (17'1") | - |
Stick | - | 2.9m (9'2") | 2.5m (8'2") | - |
Bucket | - | GD 1.2 m³ (1.7 yd³) | GD 0.76 m³ (0.99 yd³ ) | - |
Maximum Loading Height | - | 24.7 ft | - | - |
Maximum Digging Depth | - | 21.8 ft | - | - |
Reach at Ground Level | - | 33.4 ft | 29.6 ft | - |
Vertical Wall Digging Depth | - | 17.3 ft | 15 ft | - |
Bucket Forces (ISO) | - | 33946 lbf | 23830 lbf | - |
Stick Forces (ISO) | - | 23605 lbf | 15961 lbf | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 21.6 ft | - | - |
Dump Height | - | - | 25.2 ft | - |
Digging Height | - | - | 18.4 ft | - |
working Ranges and Forces |
||||
Cutting Height | - | 35.8 ft | 34.2 ft | - |
Add a Similar Product:
- M319 Wheeled Excavator Add
- M320 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 395 Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 352 Hydraulic Excavator Add
- 374 Hydraulic Excavator Add