Compare Equipment Go Back
 317 Hydraulic Excavator |
 M319 Wheeled Excavator |
 352 UHD Ultra High Demolition Hydraulic Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 133 HP | 171 HP | 424 HP |
| Net Power - ISO 9249 (DIN) | 134 hp (metric) | 174 hp (metric) | 430 hp (metric) |
| Engine Model | Cat C3.6 | C4.4 | Cat C13 |
| Engine Power - ISO 14396 | 134 HP | 174 HP | 425 HP |
| Engine Power - ISO 14396 (DIN) | 136 hp (metric) | 176 hp (metric) | 431 hp (metric) |
| Bore | 4 in | 4.1 in | 5 in |
| Stroke | 5 in | 127 mm | 6 in |
| Displacement | 220 in³ | 268.5 in³ | 763 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 40200 lb | - | 143300 lb |
| Note (1) | - | - | Hydraulic Variable Gauge undercarriage, 28 m (91'10") UHD front, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. No work tool. |
| Machine Weight - Retrofit Configuration | - | - | 139300 lb |
| Note (3) | - | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.35TB (11'0") stick, HD 2.41 m³ ( 3.15 yd³) bucket, 600 mm (24") triple grouser shoes and 12.0 mt (26,455 lb) counterweight. |
| UHD in Cradle | - | - | 26000 lb |
| Retrofit Boom in Cradle - R3.9 TB Stick | - | - | 16310 lb |
| Retrofit Boom in Cradle - R3.35 TB Stick | - | - | 15950 lb |
| Retrofit Boom in Cradle - R2.9 TB Stick | - | - | 15760 lb |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 21 ft | - | - |
| Boom | Reach 5.1 m (16'9") | - | - |
| Stick | Reach R2.9 m (9'6") | - | - |
| Bucket | GD 0.76 m³ (0.99 yd³) | - | - |
| Maximum Reach at Ground Level | 29.6 ft | - | - |
| Maximum Cutting Height | 29.1 ft | - | - |
| Maximum Loading Height | 20.6 ft | - | - |
| Minimum Loading Height | 6.5 ft | - | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 20.2 ft | - | - |
| Maximum Vertical Wall Digging Depth | 16.3 ft | - | - |
| Minimum Working Equipment Radius | 9.6 ft | - | - |
| Bucket Digging Force - ISO | 27650 lbf | - | - |
| Stick Digging Force - ISO | 16860 lbf | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow | 296 L/min (78 gal/min) | - | 779 l/min (206 gal/min) |
| Maximum Pressure - Equipment | 5076 psi | - | 5076 psi |
| Maximum Pressure - Travel | 5076 psi | - | 5076 psi |
| Maximum Pressure - Swing | 3741 psi | - | 3771 psi |
| Main System - Maximum Flow - Implement | - | 67 gal/min | - |
| Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - |
| Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - |
| Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
Swing Mechanism |
|||
| Swing Speed | 8.7 r/min | 9.4 r/min | 8.44 r/min |
| Maximum Swing Torque | 47647 ft·lbf | 32560 ft·lbf | 139000 ft·lbf |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 71.6 gal (US) | - | 188.9 gal (US) |
| Cooling System | 5.8 gal (US) | 35 l | 13.7 gal (US) |
| Engine Oil | 2.9 gal (US) | - | 10.6 gal (US) |
| Final Drive - Each | 1.6 gal (US) | - | 2.5 gal (US) |
| Hydraulic System - Including Tank | 24.8 gal (US) | 74 gal (US) | 145.3 gal (US) |
| Hydraulic Tank | 23 gal (US) | 31.7 gal (US) | 57.3 gal (US) |
| DEF Tank | 5.9 gal (US) | - | 12.2 gal (US) |
| Fuel Tank | - | 76.6 gal (US) | - |
| Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | - |
| Swing Drive - Each | - | - | 2.8 gal (US) |
Dimensions |
|||
| Boom | Reach 5.1 m (16'9") | VA 5.2 m (17'1") | - |
| Stick | Reach R2.9 m (9'6") | 2.5m (8'2") | - |
| Bucket | GD 0.76 m³ (0.99 yd³) | GD 0.91 m³ (1.19 yd³ ) | - |
| Shipping Height - Top of Cab | 9.6 ft | 10.7 ft | 11.1 ft |
| Handrail Height | 9.6 ft | - | - |
| Shipping Length | 28.1 ft | 26.6 ft | 61.8 ft |
| Tail Swing Radius | 8.2 ft | 6.25 ft | 12.3 ft |
| Counterweight Clearance | 3.3 ft | 4.25 ft | 4.7 ft |
| Ground Clearance | 1.4 ft | 1.4 ft | 1.7 ft |
| Track Length | 13 ft | - | 18.9 ft |
| Length to Center of Rollers | 10.4 ft | - | - |
| Track Gauge | 6.5 ft | - | - |
| Transport Width | 8.8 ft | - | 10.7 ft |
| Support Point | - | 11.6 ft | - |
| Undercarriage Length | - | 16.6 ft | - |
| Wheel Base | - | 8.8 ft | - |
| Note (1) | - | - | 28 m (91'10") UHD Front |
| Cab Height - With OPG | - | - | 11.8 ft |
| Track Length to Center of Rollers | - | - | 15.6 ft |
| Working Gauge - Extended Position | - | - | 11.2 ft |
| Shipping Gauge - Retracted Position | - | - | 7.9 ft |
| Machine Length - without Front, with Counterweight | - | - | 25.5 ft |
| Machine Length - without Front and Counterweight | - | - | 24.9 ft |
| Track Width - Extended | - | - | 13.1 ft |
| Track Width - Retracted | - | - | 9.8 ft |
| Note (2) | - | - | 600 mm (24") Track Shoes |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.43 metric tonnes. | - |
Machine Weight |
|||
| Operating Weight Maximum | - | 46407 lb | - |
| Operating Weight Minimum | - | 41888 lb | - |
Transmission |
|||
| Maximum Travel Speed | - | 21.7 mile/h | - |
| Forward/Reverse - 1st Gear | - | 6.2 mile/h | - |
| Forward/Reverse - 2nd Gear | - | 21.7 mile/h | - |
| Creeper Speed - 1st Gear | - | 3.4 mile/h | - |
| Creeper Speed - 2nd Gear | - | 9.3 mile/h | - |
| Drawbar Pull | - | 23380 lbf | - |
Working Ranges and Forces |
|||
| Boom Type | - | VA 5.2 m (17'1") | - |
| Stick | - | 2.5m (8'2") | - |
| Bucket | - | GD 0.91 m³ (1.19 yd³ ) | - |
| Dump Height | - | 25.6 ft | - |
| Digging Height | - | 18.9 ft | - |
| Reach at Ground Level | - | 30.2 ft | - |
| Vertical Wall Digging Depth | - | 14.6 ft | - |
| Stick Forces (ISO) | - | 16861 lbf | - |
| Bucket Forces (ISO) | - | 26752 lbf | - |
| Maximum Pin Height at Stick Nose | - | - | 90.8 ft |
| Maximum Weight at Stick Nose | - | - | 8157 lb |
| Maximum Working Pin Height at Stick Nose - 1/2 | - | - | 75.2 ft |
| Maximum Working Reach at Stick Nose - 1/2 | - | - | 45.4 ft |
| Maximum Height at Stick Nose in Max Reach Position | - | - | 52.9 ft |
| Maximum Reach at Stick Nose | - | - | 51.7 ft |
| Note (1) | - | - | 28 m (91' 10") UHD Front Over-the-Front |
working Ranges and Forces |
|||
| Cutting Height | - | 35.2 ft | - |
Swing Mechanism - UHD Fronts |
|||
| Swing Speed | - | - | 4.22 r/min |
Working Ranges and Forces - Retrofit Boom - Straight |
|||
| Note 1 | - | - | Straight - R3.35 m (11'0") Stick (Over-the-Front) |
| Bucket | - | - | GD 3.08 m³ (4.03 yd³) |
| Maximum Pin Height at Stick Nose | - | - | 39.8 ft |
| Maximum Weight at Stick Nose | - | - | 13190 lb |
| Maximum Height at Stick Nose in Max Reach Position | - | - | 7.7 ft |
| Maximum Reach at Stick Nose | - | - | 36.5 ft |
| Maximum Digging Depth | - | - | 17 ft |
| Maximum Reach - Ground Level | - | - | 41.9 ft |
| Maximum Loading Height | - | - | 33.6 ft |
| Minimum Loading Height | - | - | 15 ft |
| Bucket Digging Force - ISO | - | - | 60250 lbf |
| Stick Digging Force - ISO | - | - | 44740 lbf |
Working Ranges and Forces - Retrofit Boom - Bent |
|||
| Note 1 | - | - | Bent - R3.35 m (11'0") Stick |
| Bucket | - | - | GD 3.08 m³ (4.03 yd³) |
| Maximum Digging Depth | - | - | 21.9 ft |
| Maximum Reach - Ground Level | - | - | 39 ft |
| Maximum Cutting Height | - | - | 35.1 ft |
| Maximum Loading Height | - | - | 24.6 ft |
| Minimum Loading Height | - | - | 10 ft |
| Bucket Digging Force - ISO | - | - | 60250 lbf |
| Stick Digging Force - ISO | - | - | 44740 lbf |
Add a Similar Product:
