Compare Equipment Go Back
317 Hydraulic Excavator |
M318 Wheeled Excavator |
374 Hydraulic Excavator |
|
Engine |
|||
---|---|---|---|
Net Power - ISO 9249 | 133 HP | 171 HP | 484 HP |
Net Power - ISO 9249 (DIN) | 134 hp (metric) | 174 hp (metric) | 491 hp (metric) |
Engine Model | Cat C3.6 | C4.4 | Cat C15 |
Engine Power - ISO 14396 | 134 HP | 174 HP | 485 HP |
Engine Power - ISO 14396 (DIN) | 136 hp (metric) | 176 hp (metric) | 492 hp (metric) |
Bore | 4 in | 4 in | 5.4 in |
Stroke | 5 in | 5 in | 6.7 in |
Displacement | 220 in³ | 285.5 in³ | 928 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
Operating Weight | 40200 lb | - | 162900 lb |
Note | - | - | Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. |
Working Ranges & Forces |
|||
Maximum Digging Depth | 21 ft | - | 28.1 ft |
Boom | Reach 5.1 m (16'9") | - | Reach 7.8m (25'7") |
Stick | Reach R2.9 m (9'6") | - | R3.6m (11'10") |
Bucket | GD 0.76 m³ (0.99 yd³) | - | SD 3.3 m³ (4.32 yd³) |
Maximum Reach at Ground Level | 29.6 ft | - | 43.2 ft |
Maximum Cutting Height | 29.1 ft | - | 41.2 ft |
Maximum Loading Height | 20.6 ft | - | 27.7 ft |
Minimum Loading Height | 6.5 ft | - | 10.1 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 20.2 ft | - | 27.8 ft |
Maximum Vertical Wall Digging Depth | 16.3 ft | - | 22.8 ft |
Minimum Working Equipment Radius | 9.6 ft | - | - |
Bucket Digging Force - ISO | 27650 lbf | - | 80550 ft·lbf |
Stick Digging Force - ISO | 16860 lbf | - | 66390 ft·lbf |
Hydraulic System |
|||
Main System - Maximum Flow | 296 L/min (78 gal/min) | - | - |
Maximum Pressure - Equipment | 5076 psi | 5366 psi | 5366 psi |
Maximum Pressure - Travel | 5076 psi | 5076 gal/min | 5076 psi |
Maximum Pressure - Swing | 3741 psi | 5149 gal/min | 5076 psi |
Main System - Maximum Flow - Implement | - | 67 gal/min | 237 gal/min |
Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
Swing Mechanism |
|||
Swing Speed | 8.7 r/min | 9.4 r/min | 6.34 r/min |
Maximum Swing Torque | 47647 ft·lbf | - | 220000 ft·lbf |
Maximum Swing Speed | - | 32560 ft·lbf | - |
Service Refill Capacities |
|||
Fuel Tank Capacity | 71.6 gal (US) | - | 243 gal (US) |
Cooling System | 5.8 gal (US) | 8.5 gal (US) | 19 gal (US) |
Engine Oil | 2.9 gal (US) | - | 16 gal (US) |
Final Drive - Each | 1.6 gal (US) | - | 9 gal (US) |
Hydraulic System - Including Tank | 24.8 gal (US) | 68.7 gal (US) | 164 gal (US) |
Hydraulic Tank | 23 gal (US) | 31.7 gal (US) | 86 gal (US) |
DEF Tank | 5.9 gal (US) | - | 21 gal (US) |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | - |
Final Drive | - | 0.7 gal (US) | - |
Fuel Tank | - | 92.5 gal (US) | - |
Swing Drive | - | - | 5 gal (US) |
Dimensions |
|||
Boom | Reach 5.1 m (16'9") | 5205 mm (17'1") | Reach 7.8m (25'7") |
Stick | Reach R2.9 m (9'6") | 2.5 m (8' 2") | R3.6m (11'10") |
Bucket | GD 0.76 m³ (0.99 yd³) | 0.91 m³ GD (1.19 yd³) | SD 3.3 m³ (4.32 yd³) |
Shipping Height - Top of Cab | 9.6 ft | 11 ft | 11.8 ft |
Handrail Height | 9.6 ft | - | 13 ft |
Shipping Length | 28.1 ft | 27.8 ft | 44.9 ft |
Tail Swing Radius | 8.2 ft | 7.7 ft | 13.8 ft |
Counterweight Clearance | 3.3 ft | 4.3 ft | 4.1 ft |
Ground Clearance | 1.4 ft | 1.1 ft | 2.6 ft |
Track Length | 13 ft | - | 19.3 ft |
Length to Center of Rollers | 10.4 ft | - | - |
Track Gauge | 6.5 ft | - | 11.2 ft |
Transport Width | 8.8 ft | - | 11.1 ft |
Support Point | - | 11.5 ft | - |
Wheel Base | - | 8.9 ft | - |
Track Length to Center of Rollers | - | - | 15.5 ft |
Note | - | - | Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps |
Air Conditioning System |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Machine Weight |
|||
Operating Weight Maximum | - | 43980 lb | - |
Operating Weight Minimum | - | 38580 lb | - |
Note (1) | - | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. | - |
Note (2) | - | Typical configurations include 2500 mm (8'2") medium stick and 3700 kg (8,157 lb) counterweight. | - |
Drive |
|||
Maximum Travel Speed | - | 21.7 mile/h | - |
Working Ranges and Forces |
|||
Boom Type | - | VA Boom | - |
Bucket | - | 0.91 m³ GD (1.19 yd³) | - |
Digging Height | - | 19.3 ft | - |
Stick | - | 2.5 m (8' 2") | - |
Reach at Ground Level | - | 30.2 ft | - |
Vertical Wall Digging Depth | - | 15.1 ft | - |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | - |
Bucket Forces (ISO) | - | 26752 lbf | - |
Stick Forces (ISO) | - | 16861 lbf | - |
Cutting Height | - | 33.7 ft | - |
Service Refill |
|||
Engine Oil | - | 2.9 gal (US) | - |
Sustainability |
|||
Recyclability | - | 92% | - |
Add a Similar Product:
- M322 Add
- M319 Wheeled Excavator Add
- M320 Wheeled Excavator Add
- M315 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- M314 Wheeled Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 395 Excavator Add