Compare Equipment Go Back
 317 Hydraulic Excavator |
 M316 Wheeled Excavator |
 340 UHD Ultra High Demolition Hydraulic Excavator |
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 133 HP | 141 HP | 346 HP |
| Net Power - ISO 9249 (DIN) | 134 hp (metric) | 143 hp (metric) | 352 hp (metric) |
| Engine Model | Cat C3.6 | Cat C4.4 | Cat C9.3B |
| Engine Power - ISO 14396 | 134 HP | 148 HP | 347 HP |
| Engine Power - ISO 14396 (DIN) | 136 hp (metric) | 150 hp (metric) | 351 hp (metric) |
| Bore | 4 in | 4 ft | 5 in |
| Stroke | 5 in | - | 6 in |
| Displacement | 220 in³ | 268.5 in³ | 568 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,000 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,900 rpm. Advertised power is tested per the specified standard in effect at the time |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
|||
| Operating Weight | 40200 lb | - | 122600 lb |
| Note (1) | - | - | Hydraulic Variable Gauge undercarriage, 22 m (72'2") UHD front, 600 mm (24") Heavy Duty (HD) triple grouser shoes and 9.0 mt (19,842 lb) counterweight. No work tool. |
| Machine Weight - Retrofit Configuration | - | - | 118600 lb |
| Note (2) | - | - | Hydraulic Variable Gauge undercarriage, Retrofit boom, R3.2DB (10'6") stick, General Duty (GD) 2.27 m³ (2.97 yd³) bucket, 600 mm (24") HD triple grouser shoes and 9.0 mt (19,842 lb) counterweight. |
| UHD in Cradle | - | - | 18700 lb |
| Retrofit Boom in Cradle - R3.9 DB Stick | - | - | 13710 lb |
| Retrofit Boom in Cradle - R3.2 DB Stick | - | - | 13340 lb |
| Retrofit Boom in Cradle - R2.8 DB Stick | - | - | 13120 lb |
| 2-piece Retrofit boom in cradle - R3.2 DB stick | - | - | 17440 lb |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 21 ft | - | - |
| Boom | Reach 5.1 m (16'9") | - | - |
| Stick | Reach R2.9 m (9'6") | - | - |
| Bucket | GD 0.76 m³ (0.99 yd³) | - | - |
| Maximum Reach at Ground Level | 29.6 ft | - | - |
| Maximum Cutting Height | 29.1 ft | - | - |
| Maximum Loading Height | 20.6 ft | - | - |
| Minimum Loading Height | 6.5 ft | - | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 20.2 ft | - | - |
| Maximum Vertical Wall Digging Depth | 16.3 ft | - | - |
| Minimum Working Equipment Radius | 9.6 ft | - | - |
| Bucket Digging Force - ISO | 27650 lbf | - | - |
| Stick Digging Force - ISO | 16860 lbf | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow | 296 L/min (78 gal/min) | - | 560 l/min (148 gal/min) |
| Maximum Pressure - Equipment | 5076 psi | 5076 psi | 5076 psi |
| Maximum Pressure - Travel | 5076 psi | 5076 psi | 5076 psi |
| Maximum Pressure - Swing | 3741 psi | 5076 psi | 4264 psi |
| Main System - Maximum Flow - Implement | - | 73 gal/min | - |
| Maximum Pressure - Equipment - Lift Mode | - | - | 5511 psi |
Swing Mechanism |
|||
| Swing Speed | 8.7 r/min | 10.2 r/min | 8 r/min |
| Maximum Swing Torque | 47647 ft·lbf | 32560 ft·lbf | 105000 ft·lbf |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 71.6 gal (US) | - | 159 gal (US) |
| Cooling System | 5.8 gal (US) | 6.3 gal (US) | 11 gal (US) |
| Engine Oil | 2.9 gal (US) | - | 9 gal (US) |
| Final Drive - Each | 1.6 gal (US) | - | 2 gal (US) |
| Hydraulic System - Including Tank | 24.8 gal (US) | 68.7 gal (US) | 145 gal (US) |
| Hydraulic Tank | 23 gal (US) | 31.7 gal (US) | 43 gal (US) |
| DEF Tank | 5.9 gal (US) | - | 21 gal (US) |
| Final Drive | - | 0.7 gal (US) | - |
| Fuel Tank | - | 92.5 gal (US) | - |
| Swing Drive | - | - | 5 gal (US) |
Dimensions |
|||
| Boom | Reach 5.1 m (16'9") | 5205 mm (17' 1") | - |
| Stick | Reach R2.9 m (9'6") | 2.5 m (8' 2") | - |
| Bucket | GD 0.76 m³ (0.99 yd³) | GD 0.8 m3 (1.05 yd3) | - |
| Shipping Height - Top of Cab | 9.6 ft | 10.5 ft | 11.1 ft |
| Handrail Height | 9.6 ft | - | - |
| Shipping Length | 28.1 ft | 8630 ft | 49.9 ft |
| Tail Swing Radius | 8.2 ft | 7.7 ft | 11.6 ft |
| Counterweight Clearance | 3.3 ft | 4.3 ft | 4.6 ft |
| Ground Clearance | 1.4 ft | 1.3 ft | 1.7 ft |
| Track Length | 13 ft | - | 18.9 ft |
| Length to Center of Rollers | 10.4 ft | - | - |
| Track Gauge | 6.5 ft | - | - |
| Transport Width | 8.8 ft | - | 10.7 ft |
| Support Point | - | 12.7 ft | - |
| Undercarriage Length | - | 16.3 ft | - |
| Wheel Base | - | 8.4 ft | - |
| Note (1) | - | - | 22 m (72'2") UHD Front |
| Cab Height - With OPG | - | - | 11.8 ft |
| Track Length to Center of Rollers | - | - | 15.6 ft |
| Working Gauge - Extended Position | - | - | 11.1 ft |
| Shipping Gauge - Retracted Position | - | - | 7.8 ft |
| Machine Length - without Front, with Counterweight | - | - | 23.3 ft |
| Machine Length - without Front and Counterweight | - | - | 22.9 ft |
| Track Width - Extended | - | - | 13.1 ft |
| Track Width - Retracted | - | - | 9.8 ft |
| Note (2) | - | - | 600 mm (24") Track Shoes |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg (2.2 lb) of refrigerant which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Machine Weight |
|||
| Operating Weight Maximum | - | 36400 lb | - |
| Note (1) | - | Operating weight includes full fuel tank, operator, 10.00-20 tires, VA boom, 2500 mm (8' 2") stick, 2600 kg (5,732 lb) counterweight, undercarriage, and 4 outriggers. | - |
Drive |
|||
| Maximum Travel Speed | - | 21.7 mile/h | - |
Working Ranges and Forces |
|||
| Boom Type | - | VA Boom | - |
| Bucket | - | GD 0.8 m3 (1.05 yd3) | - |
| Stick | - | R2.5 (8' 2") | - |
| Cutting Height | - | 33.2 ft | - |
| Reach at Ground Level | - | 29.4 ft | - |
| Vertical Wall Digging Depth | - | 14.5 mm | - |
| Digging Height | - | 18.5 ft | - |
| Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). | 22 m (72' 2") UHD Front (Over-the-Front) |
| Maximum Pin Height at Stick Nose | - | - | 72.2 ft |
| Maximum Weight at Stick Nose | - | - | 8160 lb |
| Maximum Working Pin Height at Stick Nose - 1/2 | - | - | 61 ft |
| Maximum Working Reach at Stick Nose - 1/2 | - | - | 38.4 ft |
| Maximum Height at Stick Nose in Max Reach Position | - | - | 41.5 ft |
| Maximum Reach at Stick Nose | - | - | 44.4 ft |
Swing Mechanism - UHD Fronts |
|||
| Swing Speed | - | - | 4.09 r/min |
Working Ranges and Forces - Retrofit Boom - Straight |
|||
| Note 1 | - | - | Straight - R3.2 m (10' 6") Stick (Over-the-Front) - HVG Undercarriage |
| Bucket | - | - | GD 2.27 m³ (2.97 yd³) |
| Maximum Pin Height at Stick Nose | - | - | 39.8 ft |
| Maximum Weight at Stick Nose | - | - | 9260 lb |
| Maximum Height at Stick Nose in Max Reach Position | - | - | 7.6 ft |
| Maximum Reach at Stick Nose | - | - | 34.8 ft |
| Maximum Digging Depth | - | - | 16.1 ft |
| Maximum Reach - Ground Level | - | - | 39.9 ft |
| Maximum Loading Height | - | - | 34 ft |
| Minimum Loading Height | - | - | 15.7 ft |
| Bucket Digging Force - ISO | - | - | 47160 lbf |
| Stick Digging Force - ISO | - | - | 37300 lbf |
Working Ranges and Forces - Retrofit Boom - Bent |
|||
| Note 1 | - | - | Bent - R3.2DB (10'6") Stick - HVG Undercarriage |
| Bucket | - | - | GD 2.27 m³ (2.97 yd³) |
| Maximum Digging Depth | - | - | 21.4 ft |
| Maximum Reach - Ground Level | - | - | 36.7 ft |
| Maximum Cutting Height | - | - | 35.4 ft |
| Maximum Loading Height | - | - | 24.9 ft |
| Minimum Loading Height | - | - | 10.4 ft |
| Bucket Digging Force - ISO | - | - | 47160 lbf |
| Stick Digging Force - ISO | - | - | 37300 lbf |
Add a Similar Product:
