Compare Equipment Go Back
317 Hydraulic Excavator |
M315 Wheeled Excavator |
|
|
Engine |
|||
---|---|---|---|
Net Power - ISO 9249 | 133 HP | 145 HP | - |
Net Power - ISO 9249 (DIN) | 134 hp (metric) | 147 hp (metric) | - |
Engine Model | Cat C3.6 | C4.4 | - |
Engine Power - ISO 14396 | 134 HP | 148 HP | - |
Engine Power - ISO 14396 (DIN) | 136 hp (metric) | 150 hp (metric) | - |
Bore | 4 in | 4.1 in | - |
Stroke | 5 in | 127 mm | - |
Displacement | 220 in³ | 268.5 in³ | - |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | - |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | - |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | - |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | - |
Weights |
|||
Operating Weight | 40200 lb | - | - |
Working Ranges & Forces |
|||
Maximum Digging Depth | 21 ft | - | - |
Boom | Reach 5.1 m (16'9") | - | - |
Stick | Reach R2.9 m (9'6") | - | - |
Bucket | GD 0.76 m³ (0.99 yd³) | - | - |
Maximum Reach at Ground Level | 29.6 ft | - | - |
Maximum Cutting Height | 29.1 ft | - | - |
Maximum Loading Height | 20.6 ft | - | - |
Minimum Loading Height | 6.5 ft | - | - |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 20.2 ft | - | - |
Maximum Vertical Wall Digging Depth | 16.3 ft | - | - |
Minimum Working Equipment Radius | 9.6 ft | - | - |
Bucket Digging Force - ISO | 27650 lbf | - | - |
Stick Digging Force - ISO | 16860 lbf | - | - |
Hydraulic System |
|||
Main System - Maximum Flow | 296 L/min (78 gal/min) | - | - |
Maximum Pressure - Equipment | 5076 psi | - | - |
Maximum Pressure - Travel | 5076 psi | - | - |
Maximum Pressure - Swing | 3741 psi | - | - |
Main System - Maximum Flow - Implement | - | 73 gal/min | - |
Maximum Pressure - Implement Circuit - Heavy Lift | - | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | 5076 psi | - |
Swing Mechanism |
|||
Swing Speed | 8.7 r/min | 9.1 r/min | - |
Maximum Swing Torque | 47647 ft·lbf | 30340 ft·lbf | - |
Service Refill Capacities |
|||
Fuel Tank Capacity | 71.6 gal (US) | - | - |
Cooling System | 5.8 gal (US) | 24 l | - |
Engine Oil | 2.9 gal (US) | - | - |
Final Drive - Each | 1.6 gal (US) | - | - |
Hydraulic System - Including Tank | 24.8 gal (US) | 58.1 gal (US) | - |
Hydraulic Tank | 23 gal (US) | 23.8 gal (US) | - |
DEF Tank | 5.9 gal (US) | - | - |
Fuel Tank | - | 74 gal (US) | - |
Diesel Exhaust Fluid (DEF) | - | 5.3 gal (US) | - |
Dimensions |
|||
Boom | Reach 5.1 m (16'9") | VA 5.2 m (17'1") | - |
Stick | Reach R2.9 m (9'6") | 2.5m (8'2") | - |
Bucket | GD 0.76 m³ (0.99 yd³) | GD 0.76 m³ (0.99 yd³ ) | - |
Shipping Height - Top of Cab | 9.6 ft | 10.9 ft | - |
Handrail Height | 9.6 ft | - | - |
Shipping Length | 28.1 ft | 25.1 ft | - |
Tail Swing Radius | 8.2 ft | 5.9 ft | - |
Counterweight Clearance | 3.3 ft | 4.2 ft | - |
Ground Clearance | 1.4 ft | 1.5 ft | - |
Track Length | 13 ft | - | - |
Length to Center of Rollers | 10.4 ft | - | - |
Track Gauge | 6.5 ft | - | - |
Transport Width | 8.8 ft | - | - |
Support Point | - | 10.1 ft | - |
Undercarriage Length | - | 16 ft | - |
Wheel Base | - | 8.4 ft | - |
Air Conditioning System |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.287 metric tonnes. | - | - |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - |
Machine Weight |
|||
Operating Weight Maximum | - | 39680 lb | - |
Operating Weight Minimum | - | 34610 lb | - |
Transmission |
|||
Maximum Travel Speed | - | 21.7 mile/h | - |
Forward/Reverse - 1st Gear | - | 6.2 mile/h | - |
Forward/Reverse - 2nd Gear | - | 21.7 mile/h | - |
Creeper Speed - 1st Gear | - | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | 9.3 mile/h | - |
Drawbar Pull | - | 23380 lbf | - |
Working Ranges and Forces |
|||
Boom Type | - | VA 5.2 m (17'1") | - |
Stick | - | 2.5m (8'2") | - |
Bucket | - | GD 0.76 m³ (0.99 yd³ ) | - |
Dump Height | - | 25.2 ft | - |
Digging Height | - | 18.4 ft | - |
Reach at Ground Level | - | 29.6 ft | - |
Vertical Wall Digging Depth | - | 15 ft | - |
Stick Forces (ISO) | - | 15961 lbf | - |
Bucket Forces (ISO) | - | 23830 lbf | - |
working Ranges and Forces |
|||
Cutting Height | - | 34.2 ft | - |
Add a Similar Product: