Compare Equipment Go Back
315 Hydraulic Excavator |
M320 Wheeled Excavator |
M315 Wheeled Excavator |
374 Hydraulic Excavator |
|
Engine |
||||
---|---|---|---|---|
Net Power - ISO 9249 | 108 HP | 171 HP | 145 HP | 484 HP |
Net Power - ISO 9249 (DIN) | 110 hp (metric) | 174 hp (metric) | 147 hp (metric) | 491 hp (metric) |
Engine Model | Cat C3.6 | C4.4 | C4.4 | Cat C15 |
Engine Power - ISO 14396 | 110 HP | 174 HP | 148 HP | 485 HP |
Engine Power - ISO 14396 (DIN) | 111 hp (metric) | 176 hp (metric) | 150 hp (metric) | 492 hp (metric) |
Bore | 4 in | 4 in | 4.1 in | 5.4 in |
Stroke | 5 in | 5.3 in | 127 mm | 6.7 in |
Displacement | 220 in³ | 268.5 in³ | 268.5 in³ | 928 in³ |
Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ | Up to B20¹ |
Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of |
Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Weights |
||||
Operating Weight | 34000 lb | - | - | 162900 lb |
Note | - | - | - | Long Variable Gauge undercarriage, Reach boom, R4.67VB (15'4") stick, SD 3.3 m³ (4.32 yd³) bucket, 900 mm (35") HD double grouser shoes and removal type counterweight. |
Working Ranges & Forces |
||||
Maximum Digging Depth | 19.6 ft | - | - | 28.1 ft |
Boom | Reach 4.65 m (15'3") | - | - | Reach 7.8m (25'7") |
Stick | Reach R3.0 m (9'10") | - | - | R3.6m (11'10") |
Bucket | GD 0.53 m³ (0.69 yd³) | - | - | SD 3.3 m³ (4.32 yd³) |
Maximum Reach at Ground Level | 28.5 ft | - | - | 43.2 ft |
Maximum Cutting Height | 31.7 ft | - | - | 41.2 ft |
Maximum Loading Height | 23.6 ft | - | - | 27.7 ft |
Minimum Loading Height | 6.8 ft | - | - | 10.1 ft |
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 19 ft | - | - | 27.8 ft |
Maximum Vertical Wall Digging Depth | 16.9 ft | - | - | 22.8 ft |
Minimum Working Equipment Radius | 7.3 ft | - | - | - |
Bucket Digging Force - ISO | 22180 lbf | - | - | 80550 ft·lbf |
Stick Digging Force - ISO | 13330 lbf | - | - | 66390 ft·lbf |
Hydraulic System |
||||
Main System - Maximum Flow | 276 l/min (73 gal/min) | - | - | - |
Maximum Pressure - Equipment | 5075 psi | 5366 psi | - | 5366 psi |
Maximum Pressure - Travel | 5075 psi | 5076 gal/min | - | 5076 psi |
Maximum Pressure - Swing | 3770 psi | 5729 gal/min | - | 5076 psi |
Main System - Maximum Flow - Implement | - | 81 gal/min | 73 gal/min | 237 gal/min |
Maximum Pressure - Implement Circuit - Heavy Lift | - | - | 5366 psi | - |
Maximum Pressure - Implement Circuit - Travel Circuit | - | - | 5076 psi | - |
Maximum Pressure - Implement Circuit - Normal | - | - | 5076 psi | - |
Maximum Pressure - Equipment - Lift Mode | - | - | - | 5511 psi |
Swing Mechanism |
||||
Swing Speed | 12 r/min | 9.2 r/min | 9.1 r/min | 6.34 r/min |
Maximum Swing Torque | 25815 ft·lbf | 37000 ft·lbf | 30340 ft·lbf | 220000 ft·lbf |
Service Refill Capacities |
||||
Fuel Tank Capacity | 49 gal (US) | - | - | 243 gal (US) |
Cooling System | 4 gal (US) | 8.4 gal (US) | 24 l | 19 gal (US) |
Engine Oil | 2 gal (US) | - | - | 16 gal (US) |
Final Drive - Each | 1 gal (US) | - | - | 9 gal (US) |
Hydraulic System - Including Tank | 22.5 gal (US) | 71.3 gal (US) | 58.1 gal (US) | 164 gal (US) |
Hydraulic Tank | 19 gal (US) | 40.9 gal (US) | 23.8 gal (US) | 86 gal (US) |
DEF Tank | 6 gal (US) | - | - | 21 gal (US) |
Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | 5.3 gal (US) | - |
Final Drive | - | 0.7 gal (US) | - | - |
Fuel Tank | - | 124.2 gal (US) | 74 gal (US) | - |
Swing Drive | - | - | - | 5 gal (US) |
Dimensions |
||||
Boom | Reach 4.65 m (15'3") | 5260 mm (17'3") | VA 5.2 m (17'1") | Reach 7.8m (25'7") |
Stick | Reach R3.0 m (9'10") | 2.5 m (8' 2") | 2.5m (8'2") | R3.6m (11'10") |
Bucket | GD 0.53 m³ (0.69 yd³) | 0.98 m³ GD (1.28 yd³) | GD 0.76 m³ (0.99 yd³ ) | SD 3.3 m³ (4.32 yd³) |
Shipping Height - Top of Cab | 9.2 ft | 11 ft | 10.9 ft | 11.8 ft |
Handrail Height | 9.3 ft | - | - | 13 ft |
Shipping Length | 24.7 ft | 29.3 ft | 25.1 ft | 44.9 ft |
Shipping Length - with Blade | 26.5 ft | - | - | - |
Tail Swing Radius | 5.1 ft | 8.5 ft | 5.9 ft | 13.8 ft |
Counterweight Clearance | 2.8 ft | 4.3 ft | 4.2 ft | 4.1 ft |
Ground Clearance | 1.4 ft | 1.4 ft | 1.5 ft | 2.6 ft |
Track Length | 12.3 ft | - | - | 19.3 ft |
Length to Center of Rollers | 9.9 ft | - | - | - |
Track Gauge | 6.5 ft | - | - | 11.2 ft |
Transport Width | 8.1 ft | - | - | 11.1 ft |
Support Point | - | 11.8 ft | 10.1 ft | - |
Wheel Base | - | 8.9 ft | 8.4 ft | - |
Undercarriage Length | - | - | 16 ft | - |
Track Length to Center of Rollers | - | - | - | 15.5 ft |
Note | - | - | - | Track gauge undercarriage extended with 650 mm (26") shoes; transport width undercarriage retracted with 650 mm (26") shoes and no steps |
Air Conditioning System |
||||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - |
Sustainability |
||||
Recyclability | 95% | - | - | - |
Machine Weight |
||||
Operating Weight Maximum | - | 46740 lb | 39680 lb | - |
Operating Weight Minimum | - | 41450 lb | 34610 lb | - |
Transmission |
||||
Maximum Travel Speed | - | 21.7 mile/h | 21.7 mile/h | - |
Forward/Reverse - 1st Gear | - | - | 6.2 mile/h | - |
Forward/Reverse - 2nd Gear | - | - | 21.7 mile/h | - |
Creeper Speed - 1st Gear | - | - | 3.4 mile/h | - |
Creeper Speed - 2nd Gear | - | - | 9.3 mile/h | - |
Drawbar Pull | - | - | 23380 lbf | - |
Working Ranges and Forces |
||||
Boom Type | - | VA Boom | VA 5.2 m (17'1") | - |
Bucket | - | 0.98 m³ GD (1.28 yd³) | GD 0.76 m³ (0.99 yd³ ) | - |
Stick | - | 2.5 m (8' 2") | 2.5m (8'2") | - |
Reach at Ground Level | - | 30.5 ft | 29.6 ft | - |
Vertical Wall Digging Depth | - | 13.9 ft | 15 ft | - |
Cutting Height | - | 32.6 ft | - | - |
Bucket Forces (ISO) | - | 30799 lbf | 23830 lbf | - |
Stick Forces (ISO) | - | 20682 lbf | 15961 lbf | - |
Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - | - |
Dump Height | - | - | 25.2 ft | - |
Digging Height | - | - | 18.4 ft | - |
working Ranges and Forces |
||||
Cutting Height | - | - | 34.2 ft | - |
Add a Similar Product:
- M322 Add
- M319 Wheeled Excavator Add
- M316 Wheeled Excavator Add
- M318 Wheeled Excavator Add
- M314 Wheeled Excavator Add
- 352 UHD Ultra High Demolition Hydraulic Excavator Add
- 340 UHD Ultra High Demolition Hydraulic Excavator Add
- 352 LRE Long Reach Excavation Hydraulic Excavator Add
- 395 Excavator Add
- 352 Hydraulic Excavator Add