Compare Equipment Go Back
 315 GC Hydraulic Excavator |
 M320 Wheeled Excavator |
|
|
Engine |
|||
|---|---|---|---|
| Net Power - ISO 9249 | 98 HP | 171 HP | - |
| Engine Model | Cat C3.6 | C4.4 | - |
| Engine Power - ISO 14396 | 100 HP | 174 HP | - |
| Engine Power - ISO 14396 (DIN) | 101 hp (metric) | 176 hp (metric) | - |
| Net Power - ISO 9249 (DIN) | 100 hp (metric) | 174 hp (metric) | - |
| Bore | 4 in | 4 in | - |
| Stroke | 5 in | 5.3 in | - |
| Displacement | 220 in³ | 268.5 in³ | - |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | - |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | - |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, CEM exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested per the specified standar | - |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | - |
Weights |
|||
| Operating Weight | 34000 lb | - | - |
Working Ranges & Forces |
|||
| Maximum Digging Depth | 19.6 ft | - | - |
| Boom | Reach 4.65 m (15'3") | - | - |
| Stick | Reach R3.0 m (9'10") | - | - |
| Bucket | GD 0.53 m³ (0.69 yd³) | - | - |
| Maximum Reach at Ground Level | 28.5 ft | - | - |
| Maximum Cutting Height | 31.7 ft | - | - |
| Maximum Loading Height | 23.6 ft | - | - |
| Minimum Loading Height | 6.8 ft | - | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 19.1 ft | - | - |
| Maximum Vertical Wall Digging Depth | 17 ft | - | - |
| Minimum Working Equipment Radius | 7.3 ft | - | - |
| Bucket Digging Force - ISO | 22180 lbf | - | - |
| Stick Digging Force - ISO | 13330 lbf | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow | 247 L/min (65 gal/min) | - | - |
| Maximum Pressure - Equipment | 5075 psi | 5366 psi | - |
| Maximum Pressure - Travel | 5075 psi | 5076 gal/min | - |
| Maximum Pressure - Swing | 3770 psi | 5729 gal/min | - |
| Main System - Maximum Flow - Implement | - | 81 gal/min | - |
Swing Mechanism |
|||
| Swing Speed | 11.5 r/min | 9.2 r/min | - |
| Maximum Swing Torque | 25815 ft·lbf | 37000 ft·lbf | - |
Service Refill Capacities |
|||
| Fuel Tank Capacity | 49.4 gal (US) | - | - |
| Cooling System | 4 gal (US) | 8.4 gal (US) | - |
| Engine Oil | 2.1 gal (US) | - | - |
| Final Drive - Each | 0.8 gal (US) | - | - |
| Hydraulic System - Including Tank | 22.5 gal (US) | 71.3 gal (US) | - |
| Hydraulic Tank | 19 gal (US) | 40.9 gal (US) | - |
| Diesel Exhaust Fluid (DEF) | - | 7.9 gal (US) | - |
| Final Drive | - | 0.7 gal (US) | - |
| Fuel Tank | - | 124.2 gal (US) | - |
Dimensions |
|||
| Boom | Reach 4.65 m (15'3") | 5260 mm (17'3") | - |
| Stick | Reach R3.0 m (9'10") | 2.5 m (8' 2") | - |
| Bucket | GD 0.53 m³ (0.69 yd³) | 0.98 m³ GD (1.28 yd³) | - |
| Shipping Height - Top of Cab | 9.2 ft | 11 ft | - |
| Handrail Height | 9.4 ft | - | - |
| Shipping Length | 24.6 ft | 29.3 ft | - |
| Shipping Length - with Blade | 26.5 ft | - | - |
| Tail Swing Radius | 5.1 ft | 8.5 ft | - |
| Counterweight Clearance | 2.9 ft | 4.3 ft | - |
| Ground Clearance | 1.4 ft | 1.4 ft | - |
| Track Length | 12.3 ft | - | - |
| Length to Center of Rollers | 10 ft | - | - |
| Track Gauge | 6.5 ft | - | - |
| Transport Width | 8.8 ft | - | - |
| Support Point | - | 11.8 ft | - |
| Wheel Base | - | 8.9 ft | - |
Air Conditioning System |
|||
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes. | - | - |
| Note | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. | - |
Machine Weight |
|||
| Operating Weight Maximum | - | 46740 lb | - |
| Operating Weight Minimum | - | 41450 lb | - |
Transmission |
|||
| Maximum Travel Speed | - | 21.7 mile/h | - |
Working Ranges and Forces |
|||
| Boom Type | - | VA Boom | - |
| Bucket | - | 0.98 m³ GD (1.28 yd³) | - |
| Stick | - | 2.5 m (8' 2") | - |
| Reach at Ground Level | - | 30.5 ft | - |
| Vertical Wall Digging Depth | - | 13.9 ft | - |
| Cutting Height | - | 32.6 ft | - |
| Bucket Forces (ISO) | - | 30799 lbf | - |
| Stick Forces (ISO) | - | 20682 lbf | - |
| Note (1) | - | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). | - |
Add a Similar Product:
-
M322 Add
-
M319 Wheeled Excavator Add
-
M318 Wheeled Excavator Add
-
M315 Wheeled Excavator Add
-
M316 Wheeled Excavator Add
-
352 LRE Long Reach Excavation Hydraulic Excavator Add
-
M314 Wheeled Excavator Add
-
395 Excavator Add
-
340 UHD Ultra High Demolition Hydraulic Excavator Add
-
352 UHD Ultra High Demolition Hydraulic Excavator Add