CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    TL1055 Telehandler
    View Product
    TL943 Telehandler
    View Product Remove
    TH255C Telehandler
    View Product Remove

    Operating Specifications
    Rated Load Capacity 10000 lb 9000 lb 5500 lb
    Maximum Lift Height 54.9 ft 43 ft 18.37 ft
    Maximum Forward Reach 42 ft 31 ft -
    Top Travel Speed 21 mile/h 18 mile/h -
    Capacity at Maximum Reach (o/r Down) 2500 lb - -
    Drawbar Pull - Loaded 26510 lbf - -
    Capacity at Maximum Height (o/r Down) 5000 lb - -
    Frame Leveling 10° - -
    Maximum Lift Height (o/r Down) 54.9 ft - -
    Turning Radius - Over Tires 14.1 ft - -
    Maximum Rated Load Capacity 10000 lb - -
    Operating Weight 31700 lb - -
    Capacity at Maximum Lift Height - 7000 lb -
    Capacity at Maximum Reach - 1200 lb -

    Engine
    Engine Model Cat® C3.6L* Cat® C3.6L TD 2.9L L4*
    Gross Power - Basic 134 HP 73.7 HP -
    Note *Meets U.S. EPA Tier 4 Final emission standards. *Meets U.S. EPA Tier 4 Final emission standards. *Emits equivalent to U.S. EPA Tier 4 Interim
    Gross Power - Premium - 111 HP -
    Gross Power - - 74 HP
    Displacement - - 177 in³
    Maximum Torque - 1,800 rpm - - 193 lb/ft

    Tires
    Standard 400/75-28 Duraforce Air 370/75-28 Duraforce Air 12.00 × 16.5
    Optional 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam 370/75-28 Non-Marking Foam 14.00 × 17.5; 10.5 × 18; 33 × 12-20 non-marking
    Optional (1) - 370/75-28 Duraforce Foam Fill -
    Optional (2) - 315/95-28 Telemaster Solid -
    Optional (3) - 14.00-24 16PR Air -
    Optional (4) - 14.00-24 12PR Foam -
    Optional (5) - 370/75-28 Non-Marking Air -

    Service Refill Capacities
    Fuel Tank 38 gal (US) 38 gal (US) 24 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US) - -
    Hydraulic System 49 gal (US) 47 gal (US) 24 gal (US)
    Diesel Exhaust Fluid - 5.7 gal (US) -

    Hydraulic System
    Pump Type Variable displacement load sensing axial piston pump - -
    Auxiliary Hydraulic Pressure 3307 psi - -
    Auxiliary Hydraulic Flow 25 gal/min - -

    Boom Performance
    Boom Up 15 s 9.9 s 6.8 s
    Boom Down 13 s 8.5 s 4.6 s
    Tele In 15.3 s 14.6 s 3.8 s
    Tele Out 19.7 s 14.5 s 6.7 s
    Drawbar Pull - Premium - 25589 lb -
    Bucket Dump - - 2.5 s
    Drawbar Pull - Loaded - - 8700 lb
    Bucket Crowd - - 2 s

    Axles
    Types (1) Trunnion mounted planetary 55-degree steer axles - Planetary on front and rear axles.
    Types (2) High bias limited slip differential on front axle - High bias limited slip differential on front axle.

    Braking System
    Service Brakes Inboard wet disc brakes on front and rear axles - Inboard wet disc brakes on front axle
    Parking Brakes Wet disc, spring applied hydraulic release on front axle - Wet disc spring-applied hydraulic release
    Parking Brake - Spring-applied hydraulic release on front axle -

    Transmission Speeds
    Forward 4 Speeds - -
    Reverse 3 Speeds - -

    Optional Work Tool Attachments
    Carriages: Standard Tilt - Option 3 72 in - -
    Fork Mounted - Work Platform 1220 mm × 2438 mm (4 ft × 8 ft) - -
    Carriages: Standard Tilt - Option 1 50 in - -
    Forks: Pallet - Option 2 60 in - -
    Carriages: Side Tilt - Option 1 50 in - -
    Truss with Winch - Option 1 3 ft - -
    Truss with Winch - Option 2 12 ft - -
    Carriages: Dual Hydraulic Fork Positioner - Option 1 50 in - -
    Buckets: Multi Purpose 1.3 yd³ - -
    Carriages: Dual Hydraulic Fork Positioner - Option 2 72 in - -
    Forks: Pallet - Option 3 72 in - -
    Material Handling Arm Adjustable 2-4 m (Adjustable 6.7-13.2 ft) - -
    Forks: Lumber 60 in - -
    Forks: Pallet - Option 1 48 in - -
    Carriages: Swing, 100° 72 in - -
    Fork Extensions* 90 in - -
    Buckets: General Purpose - Option 2 2 yd³ - -
    Buckets: Grapple 1.7 yd³ - -
    Carriages: Standard Tilt - Option 2 60 in - -
    Fork Mounted - Hook Lifting Hook - -
    Carriages: Side Tilt - Option 2 72 in - -
    Truss Booms - Option 2 15 ft - -
    Forks: Block/Cubing 48 in - -
    Buckets: General Purpose - Option 1 1.3 yd³ - -
    Note *For use with 1525 mm (60 in) forks or larger - -
    Truss Booms - Option 1 12 ft - -
    Carriages: Side Shift 50 in - -
    Fork Mounted - Truss Boom Adjustable 2.1-3.6 m (Adjustable 7-12 ft) - -
    Coupler Hydraulic IT Coupler (Includes Auxiliary Electronics) - -
    Fork Mounted - Hopper Trash Hopper - -

    Weights
    Operating Weight 31700 lb 25750 lb -
    Operating Weight - With Carriage and Forks - - 11000 lb

    Dimensions
    Height - 8.16 ft -
    Width - 8 ft -
    Wheel Base - 11.25 ft -
    Length - Fork Face - 20.5 ft -
    Ground Clearance - 17 in -
    Turning Radius - Over Tires - 12 ft -

    Brakes
    Features - Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle -
    Feature - - Light on dash indicates when brake is on.

    Operator Station
    Features - Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab -

    Instrumentation
    Features - Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge -

    Work Tools
    Carriages - Swing - 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) -
    Carriages - Standard Tilt - 50 in -
    Pallet Forks - Option 2 - [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) -
    Carriages - Side Shift - 50 in -
    Carriages - Dual Fork Positioning - 50 in -
    Pallet Forks - Option 1 - [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) -
    Lumber Forks - Option 1 - [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) -
    Cubing Forks - [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) -
    Pallet Forks - Option 3 - [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) -

    Transmission
    Forward - - Variable Speed
    Transmission - - Hydrostatic
    Reverse - - Variable Speed

    Instruments
    Types (1) - - Indicators for machine hours, fuel-level, steer mode, steering pressure, battery charge, coolant temperature, parking brake and engine pre-heat.
    Types (3) - - Panel and switches are illuminated for night operation.
    Types (2) - - Reverse motion alarm.

    Hydraulic System - Implement
    Maximum Auxiliary Flow - - 19 gal/min
    Note - - Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls, and hydraulic lines.
    Maximum System Pressure - - 3500 psi
    Pump Type - - Gear pump

    Operating Specifications - Standard Coupler
    Capacity at Maximum Height - - 4400 lb
    Maximum Forward Reach - - 10.83 ft
    Turning Radius - Over Tires - 14 × 17.5 Tires - - 125 in
    Top Travel Speed - 12 × 16.5 Tires - - 15 mile/h
    Capacity at Maximum Reach - - 1850 lb
    Rated Load Capacity - - 5500 lb
    Maximum Lift Height - - 18.37 ft
    Turning Radius - Over Tires - 12 × 16.5 Tires - - 127 in
    Top Travel Speed - 14 × 17.5 Tires - - 17 mile/h

    Operating Specifications - Universal Quick Coupler
    Capacity at Maximum Height - - 3000 lb
    Maximum Lift Height - - 18.37 ft
    Maximum Forward Reach - - 10.83 ft
    Turning Radius - Over Tires - 14 × 17.5 Tires - - 125 in
    Top Travel Speed - 12 × 16.5 Tires - - 15 mile/h
    Top Travel Speed - 14 × 17.5 Tires - - 17 mile/h
    Rated Load Capacity - - 5500 lb
    Turning Radius - Over Tires - 12 × 16.5 Tires - - 127 in
    Capacity at Maximum Reach - - 1700 lb
    Add a Similar Product:
    • TL1255 Telehandler Add
    • TL943 w/Stabilizers Telehandler Add
    • TL642 Telehandler Add
    • TL642 w/StabilizersTelehandler Add