CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    TL1055 Telehandler
    View Product
    TH255C Telehandler
    View Product Remove
    TL642 w/StabilizersTelehandler
    View Product Remove

    Operating Specifications
    Rated Load Capacity 10000 lb 5500 lb 6500 lb
    Maximum Lift Height 54.9 ft 18.37 ft 42 ft
    Maximum Forward Reach 42 ft - 30 ft
    Top Travel Speed 21 mile/h - 19 mile/h
    Capacity at Maximum Reach (o/r Down) 2500 lb - -
    Drawbar Pull - Loaded 26510 lbf - -
    Capacity at Maximum Height (o/r Down) 5000 lb - -
    Frame Leveling 10° - -
    Maximum Lift Height (o/r Down) 54.9 ft - -
    Turning Radius - Over Tires 14.1 ft - -
    Maximum Rated Load Capacity 10000 lb - -
    Operating Weight 31700 lb - -
    Load at Maximum Height - Stabilizers Down - - 6500 lb
    Load at Maximum Reach - Stabilizers Down - - 1700 lb

    Engine
    Engine Model Cat® C3.6L* TD 2.9L L4* Cat® C3.6L
    Gross Power - Basic 134 HP - 73.7 HP
    Note *Meets U.S. EPA Tier 4 Final emission standards. *Emits equivalent to U.S. EPA Tier 4 Interim Meets U.S. EPA Tier 4 Final emission standards.
    Gross Power - 74 HP -
    Displacement - 177 in³ -
    Maximum Torque - 1,800 rpm - 193 lb/ft -

    Tires
    Standard 400/75-28 Duraforce Air 12.00 × 16.5 370/75-28 Duraforce Air
    Optional 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam 14.00 × 17.5; 10.5 × 18; 33 × 12-20 non-marking 370/75-28 Non-Marking Foam
    Optional (1) - - 370/75-28 Duraforce Foam Fill
    Optional (2) - - 315/95-28 Telemaster Solid
    Optional (3) - - 13.00-24 16PR Air
    Optional (4) - - 13.00-24 12PR Foam
    Optional (5) - - 370/75-28 Non-Marking Air

    Service Refill Capacities
    Fuel Tank 38 gal (US) 24 gal (US) 38.3 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US) - -
    Hydraulic System 49 gal (US) 24 gal (US) 42 gal (US)

    Hydraulic System
    Pump Type Variable displacement load sensing axial piston pump - Single-section
    Auxiliary Hydraulic Pressure 3307 psi - -
    Auxiliary Hydraulic Flow 25 gal/min - -

    Boom Performance
    Boom Up 15 s 6.8 s 15.5 s
    Boom Down 13 s 4.6 s 10.7 s
    Tele In 15.3 s 3.8 s 11.8 s
    Tele Out 19.7 s 6.7 s 17 s
    Bucket Dump - 2.5 s -
    Drawbar Pull - Loaded - 8700 lb -
    Bucket Crowd - 2 s -
    Drawbar Pull - Basic - - 20670 lb

    Axles
    Types (1) Trunnion mounted planetary 55-degree steer axles Planetary on front and rear axles. -
    Types (2) High bias limited slip differential on front axle High bias limited slip differential on front axle. -

    Braking System
    Service Brakes Inboard wet disc brakes on front and rear axles Inboard wet disc brakes on front axle -
    Parking Brakes Wet disc, spring applied hydraulic release on front axle Wet disc spring-applied hydraulic release -
    Parking Brake - - Spring-applied hydraulic release on front axle

    Transmission Speeds
    Forward 4 Speeds - -
    Reverse 3 Speeds - -

    Optional Work Tool Attachments
    Carriages: Standard Tilt - Option 3 72 in - -
    Fork Mounted - Work Platform 1220 mm × 2438 mm (4 ft × 8 ft) - -
    Carriages: Standard Tilt - Option 1 50 in - -
    Forks: Pallet - Option 2 60 in - -
    Carriages: Side Tilt - Option 1 50 in - -
    Truss with Winch - Option 1 3 ft - -
    Truss with Winch - Option 2 12 ft - -
    Carriages: Dual Hydraulic Fork Positioner - Option 1 50 in - -
    Buckets: Multi Purpose 1.3 yd³ - -
    Carriages: Dual Hydraulic Fork Positioner - Option 2 72 in - -
    Forks: Pallet - Option 3 72 in - -
    Material Handling Arm Adjustable 2-4 m (Adjustable 6.7-13.2 ft) - -
    Forks: Lumber 60 in - -
    Forks: Pallet - Option 1 48 in - -
    Carriages: Swing, 100° 72 in - -
    Fork Extensions* 90 in - -
    Buckets: General Purpose - Option 2 2 yd³ - -
    Buckets: Grapple 1.7 yd³ - -
    Carriages: Standard Tilt - Option 2 60 in - -
    Fork Mounted - Hook Lifting Hook - -
    Carriages: Side Tilt - Option 2 72 in - -
    Truss Booms - Option 2 15 ft - -
    Forks: Block/Cubing 48 in - -
    Buckets: General Purpose - Option 1 1.3 yd³ - -
    Note *For use with 1525 mm (60 in) forks or larger - -
    Truss Booms - Option 1 12 ft - -
    Carriages: Side Shift 50 in - -
    Fork Mounted - Truss Boom Adjustable 2.1-3.6 m (Adjustable 7-12 ft) - -
    Coupler Hydraulic IT Coupler (Includes Auxiliary Electronics) - -
    Fork Mounted - Hopper Trash Hopper - -

    Weights
    Operating Weight 31700 lb - 22928 lb
    Operating Weight - With Carriage and Forks - 11000 lb -

    Brakes
    Feature - Light on dash indicates when brake is on. -
    Features - - Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle

    Transmission
    Forward - Variable Speed -
    Transmission - Hydrostatic -
    Reverse - Variable Speed -

    Instruments
    Types (1) - Indicators for machine hours, fuel-level, steer mode, steering pressure, battery charge, coolant temperature, parking brake and engine pre-heat. -
    Types (3) - Panel and switches are illuminated for night operation. -
    Types (2) - Reverse motion alarm. -

    Hydraulic System - Implement
    Maximum Auxiliary Flow - 19 gal/min -
    Note - Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls, and hydraulic lines. -
    Maximum System Pressure - 3500 psi -
    Pump Type - Gear pump -

    Operating Specifications - Standard Coupler
    Capacity at Maximum Height - 4400 lb -
    Maximum Forward Reach - 10.83 ft -
    Turning Radius - Over Tires - 14 × 17.5 Tires - 125 in -
    Top Travel Speed - 12 × 16.5 Tires - 15 mile/h -
    Capacity at Maximum Reach - 1850 lb -
    Rated Load Capacity - 5500 lb -
    Maximum Lift Height - 18.37 ft -
    Turning Radius - Over Tires - 12 × 16.5 Tires - 127 in -
    Top Travel Speed - 14 × 17.5 Tires - 17 mile/h -

    Operating Specifications - Universal Quick Coupler
    Capacity at Maximum Height - 3000 lb -
    Maximum Lift Height - 18.37 ft -
    Maximum Forward Reach - 10.83 ft -
    Turning Radius - Over Tires - 14 × 17.5 Tires - 125 in -
    Top Travel Speed - 12 × 16.5 Tires - 15 mile/h -
    Top Travel Speed - 14 × 17.5 Tires - 17 mile/h -
    Rated Load Capacity - 5500 lb -
    Turning Radius - Over Tires - 12 × 16.5 Tires - 127 in -
    Capacity at Maximum Reach - 1700 lb -

    Dimensions
    Height - - 8 ft
    Width - - 8 ft
    Wheel Base - - 11.25 ft
    Length - Fork Face - - 18.5 ft
    Ground Clearance - - 17 in
    Turning Radius - Over Tires - - 12 ft

    Operator Station
    Features - - Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab

    Instrumentation
    Features - - Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge

    Work Tools
    Cubing Forks - - [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
    Carriages - Side Shift - - 50 in
    Pallet Forks - Option 1 - - [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
    Carriages - Swing - - 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
    Carriages - Standard Tilt - - 50 in
    Lumber Forks - Option 1 - - [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
    Pallet Forks - Option 2 - - [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
    Carriages - Dual Fork Positioning - - 50 in
    Pallet Forks - Option 3 - - [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
    Add a Similar Product:
    • TL1255 Telehandler Add
    • TL943 w/Stabilizers Telehandler Add
    • TL943 Telehandler Add
    • TL642 Telehandler Add