CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    TL1055 Telehandler
    View Product
    TH255C Telehandler
    View Product Remove
    TL642 Telehandler
    View Product Remove

    Operating Specifications
    Rated Load Capacity 10000 lb 5500 lb 6500 lb
    Maximum Lift Height 54.9 ft 18.37 ft 42 ft
    Maximum Forward Reach 42 ft - 30 ft
    Top Travel Speed 21 mile/h - 19 mile/h
    Capacity at Maximum Reach (o/r Down) 2500 lb - -
    Drawbar Pull - Loaded 26510 lbf - 20670 lbf
    Capacity at Maximum Height (o/r Down) 5000 lb - -
    Frame Leveling 10° - 10°
    Maximum Lift Height (o/r Down) 54.9 ft - -
    Turning Radius - Over Tires 14.1 ft - 12 ft
    Maximum Rated Load Capacity 10000 lb - -
    Operating Weight 31700 lb - -
    Capacity at Maximum Height - - 6500 lb
    Capacity at Maximum Reach - - 700 lb

    Engine
    Engine Model Cat® C3.6L* TD 2.9L L4* Cat® C3.6L
    Gross Power - Basic 134 HP - 73.7 HP
    Note *Meets U.S. EPA Tier 4 Final emission standards. *Emits equivalent to U.S. EPA Tier 4 Interim Meets U.S. EPA Tier 4 Final emission standards.
    Gross Power - 74 HP -
    Displacement - 177 in³ -
    Maximum Torque - 1,800 rpm - 193 lb/ft -

    Tires
    Standard 400/75-28 Duraforce Air 12.00 × 16.5 370/75-28 Duraforce Air
    Optional 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam 14.00 × 17.5; 10.5 × 18; 33 × 12-20 non-marking 370/75-28 Non-Marking Foam
    Optional (1) - - 370/75-28 Duraforce Foam Fill
    Optional (2) - - 315/95-28 Telemaster Solid
    Optional (3) - - 13.00-24 16PR Air
    Optional (4) - - 13.00-24 12PR Foam
    Optional (5) - - 370/75-28 Non-Marking Air

    Service Refill Capacities
    Fuel Tank 38 gal (US) 24 gal (US) 38.3 gal (US)
    Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US) - -
    Hydraulic System 49 gal (US) 24 gal (US) 42 gal (US)

    Hydraulic System
    Pump Type Variable displacement load sensing axial piston pump - -
    Auxiliary Hydraulic Pressure 3307 psi - 3481 psi
    Auxiliary Hydraulic Flow 25 gal/min - 18 gal/min
    Gear Pump - - Single-section

    Boom Performance
    Boom Up 15 s 6.8 s 15 s
    Boom Down 13 s 4.6 s 10.3 s
    Tele In 15.3 s 3.8 s 9.5 s
    Tele Out 19.7 s 6.7 s 16.3 s
    Bucket Dump - 2.5 s -
    Drawbar Pull - Loaded - 8700 lb -
    Bucket Crowd - 2 s -

    Axles
    Types (1) Trunnion mounted planetary 55-degree steer axles Planetary on front and rear axles. -
    Types (2) High bias limited slip differential on front axle High bias limited slip differential on front axle. -
    Type (1) - - Trunnion mounted planetary 55 degree steer axles.
    Type (2) - - High bias limited slip differential on front axle.

    Braking System
    Service Brakes Inboard wet disc brakes on front and rear axles Inboard wet disc brakes on front axle Inboard wet disc brakes on front and rear axles
    Parking Brakes Wet disc, spring applied hydraulic release on front axle Wet disc spring-applied hydraulic release Wet disc, spring applied hydraulic release on front axle

    Transmission Speeds
    Forward 4 Speeds - 4 speed
    Reverse 3 Speeds - 3 speed

    Optional Work Tool Attachments
    Carriages: Standard Tilt - Option 3 72 in - -
    Fork Mounted - Work Platform 1220 mm × 2438 mm (4 ft × 8 ft) - -
    Carriages: Standard Tilt - Option 1 50 in - -
    Forks: Pallet - Option 2 60 in - -
    Carriages: Side Tilt - Option 1 50 in - -
    Truss with Winch - Option 1 3 ft - -
    Truss with Winch - Option 2 12 ft - -
    Carriages: Dual Hydraulic Fork Positioner - Option 1 50 in - -
    Buckets: Multi Purpose 1.3 yd³ - -
    Carriages: Dual Hydraulic Fork Positioner - Option 2 72 in - -
    Forks: Pallet - Option 3 72 in - -
    Material Handling Arm Adjustable 2-4 m (Adjustable 6.7-13.2 ft) - -
    Forks: Lumber 60 in - -
    Forks: Pallet - Option 1 48 in - -
    Carriages: Swing, 100° 72 in - -
    Fork Extensions* 90 in - -
    Buckets: General Purpose - Option 2 2 yd³ - -
    Buckets: Grapple 1.7 yd³ - -
    Carriages: Standard Tilt - Option 2 60 in - -
    Fork Mounted - Hook Lifting Hook - -
    Carriages: Side Tilt - Option 2 72 in - -
    Truss Booms - Option 2 15 ft - -
    Forks: Block/Cubing 48 in - -
    Buckets: General Purpose - Option 1 1.3 yd³ - -
    Note *For use with 1525 mm (60 in) forks or larger - -
    Truss Booms - Option 1 12 ft - -
    Carriages: Side Shift 50 in - -
    Fork Mounted - Truss Boom Adjustable 2.1-3.6 m (Adjustable 7-12 ft) - -
    Coupler Hydraulic IT Coupler (Includes Auxiliary Electronics) - -
    Fork Mounted - Hopper Trash Hopper - -

    Weights
    Operating Weight 31700 lb - 22002 lb
    Operating Weight - With Carriage and Forks - 11000 lb -

    Brakes
    Feature - Light on dash indicates when brake is on. -

    Transmission
    Forward - Variable Speed -
    Transmission - Hydrostatic -
    Reverse - Variable Speed -

    Instruments
    Types (1) - Indicators for machine hours, fuel-level, steer mode, steering pressure, battery charge, coolant temperature, parking brake and engine pre-heat. -
    Types (3) - Panel and switches are illuminated for night operation. -
    Types (2) - Reverse motion alarm. -

    Hydraulic System - Implement
    Maximum Auxiliary Flow - 19 gal/min -
    Note - Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls, and hydraulic lines. -
    Maximum System Pressure - 3500 psi -
    Pump Type - Gear pump -

    Operating Specifications - Standard Coupler
    Capacity at Maximum Height - 4400 lb -
    Maximum Forward Reach - 10.83 ft -
    Turning Radius - Over Tires - 14 × 17.5 Tires - 125 in -
    Top Travel Speed - 12 × 16.5 Tires - 15 mile/h -
    Capacity at Maximum Reach - 1850 lb -
    Rated Load Capacity - 5500 lb -
    Maximum Lift Height - 18.37 ft -
    Turning Radius - Over Tires - 12 × 16.5 Tires - 127 in -
    Top Travel Speed - 14 × 17.5 Tires - 17 mile/h -

    Operating Specifications - Universal Quick Coupler
    Capacity at Maximum Height - 3000 lb -
    Maximum Lift Height - 18.37 ft -
    Maximum Forward Reach - 10.83 ft -
    Turning Radius - Over Tires - 14 × 17.5 Tires - 125 in -
    Top Travel Speed - 12 × 16.5 Tires - 15 mile/h -
    Top Travel Speed - 14 × 17.5 Tires - 17 mile/h -
    Rated Load Capacity - 5500 lb -
    Turning Radius - Over Tires - 12 × 16.5 Tires - 127 in -
    Capacity at Maximum Reach - 1700 lb -

    Dimensions
    Height - - 8 ft
    Width - - 8 ft
    Wheel Base - - 11.25 ft
    Length - Fork Face - - 18.5 ft
    Ground Clearance - - 17 in
    Turning Radius - Over Tires - - 12 ft

    Work Tools
    Carriages - Dual Fork Positioning - - 50 in
    Pallet Forks - Option 2 - - [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
    Pallet Forks - Option 3 - - [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
    Pallet Forks - Option 1 - - [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
    Cubing Forks - - [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
    Carriages - Standard Tilt - - 50 in
    Carriages - Side Shift - - 50 in
    Carriages - Swing - - 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
    Lumber Forks - Option 1 - - [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
    Add a Similar Product:
    • TL1255 Telehandler Add
    • TL943 w/Stabilizers Telehandler Add
    • TL642 w/StabilizersTelehandler Add
    • TL943 Telehandler Add