CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    TL943 w/Stabilizers Telehandler
    View Product
    TH255C Telehandler
    View Product Remove
    TL1055 Telehandler
    View Product Remove

    Operating Specifications
    Rated Load Capacity 9000 lb 5500 lb 10000 lb
    Maximum Lift Height 43 ft 18.37 ft 54.9 ft
    Load at Maximum Height - Stabilizers Down 7000 lb - -
    Maximum Forward Reach 31 ft - 42 ft
    Load at Maximum Reach - Stabilizers Down 2700 lb - -
    Top Travel Speed 18 mile/h - 21 mile/h
    Capacity at Maximum Reach (o/r Down) - - 2500 lb
    Drawbar Pull - Loaded - - 26510 lbf
    Capacity at Maximum Height (o/r Down) - - 5000 lb
    Frame Leveling - - 10°
    Maximum Lift Height (o/r Down) - - 54.9 ft
    Turning Radius - Over Tires - - 14.1 ft
    Maximum Rated Load Capacity - - 10000 lb
    Operating Weight - - 31700 lb

    Engine
    Engine Model Cat® C3.6L TD 2.9L L4* Cat® C3.6L*
    Gross Power - Basic 73.7 HP - 134 HP
    Gross Power - Premium 111 HP - -
    Note *Meets U.S. EPA Tier 4 Final emission standards. *Emits equivalent to U.S. EPA Tier 4 Interim *Meets U.S. EPA Tier 4 Final emission standards.
    Gross Power - 74 HP -
    Displacement - 177 in³ -
    Maximum Torque - 1,800 rpm - 193 lb/ft -

    Weights
    Operating Weight 26852 lb - 31700 lb
    Operating Weight - With Carriage and Forks - 11000 lb -

    Dimensions
    Height 8.16 ft - -
    Width 8 ft - -
    Wheel Base 11.25 ft - -
    Length - Fork Face 20.5 ft - -
    Ground Clearance 17 in - -
    Turning Radius - Over Tires 12 ft - -

    Tires
    Standard 370/75-28 Duraforce Air 12.00 × 16.5 400/75-28 Duraforce Air
    Optional (1) 370/75-28 Duraforce Foam Fill - -
    Optional (2) 315/95-28 Telemaster Solid - -
    Optional (3) 14.00-24 16PR Air - -
    Optional (4) 14.00-24 12PR Foam - -
    Optional (5) 370/75-28 Non-Marking Air - -
    Optional 370/75-28 Non-Marking Foam 14.00 × 17.5; 10.5 × 18; 33 × 12-20 non-marking 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam

    Service Refill Capacities
    Fuel Tank 38 gal (US) 24 gal (US) 38 gal (US)
    Hydraulic Tank 49 gal (US) - -
    Hydraulic System - 24 gal (US) 49 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - 5.7 gal (US)

    Boom Performance
    Boom Up 9.9 s 6.8 s 15 s
    Boom Down 8.5 s 4.6 s 13 s
    Tele In 14.6 s 3.8 s 15.3 s
    Tele Out 14.5 s 6.7 s 19.7 s
    Drawbar Pull - Basic 22619 lb - -
    Drawbar Pull - Premium 25589 lb - -
    Bucket Dump - 2.5 s -
    Drawbar Pull - Loaded - 8700 lb -
    Bucket Crowd - 2 s -

    Braking System
    Parking Brake Spring-applied hydraulic release on front axle - -
    Parking Brakes - Wet disc spring-applied hydraulic release Wet disc, spring applied hydraulic release on front axle
    Service Brakes - Inboard wet disc brakes on front axle Inboard wet disc brakes on front and rear axles

    Brakes
    Features Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle - -
    Feature - Light on dash indicates when brake is on. -

    Operator Station
    Features Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab - -

    Instrumentation
    Features Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge - -

    Work Tools
    Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) - -
    Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) - -
    Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) - -
    Carriages - Dual Fork Positioning 50 in - -
    Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) - -
    Carriages - Side Shift 50 in - -
    Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) - -
    Carriages - Standard Tilt 50 in - -
    Pallet Forks - Option 3 [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) - -

    Axles
    Types (1) - Planetary on front and rear axles. Trunnion mounted planetary 55-degree steer axles
    Types (2) - High bias limited slip differential on front axle. High bias limited slip differential on front axle

    Transmission
    Forward - Variable Speed -
    Transmission - Hydrostatic -
    Reverse - Variable Speed -

    Instruments
    Types (1) - Indicators for machine hours, fuel-level, steer mode, steering pressure, battery charge, coolant temperature, parking brake and engine pre-heat. -
    Types (3) - Panel and switches are illuminated for night operation. -
    Types (2) - Reverse motion alarm. -

    Hydraulic System - Implement
    Maximum Auxiliary Flow - 19 gal/min -
    Note - Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls, and hydraulic lines. -
    Maximum System Pressure - 3500 psi -
    Pump Type - Gear pump -

    Operating Specifications - Standard Coupler
    Capacity at Maximum Height - 4400 lb -
    Maximum Forward Reach - 10.83 ft -
    Turning Radius - Over Tires - 14 × 17.5 Tires - 125 in -
    Top Travel Speed - 12 × 16.5 Tires - 15 mile/h -
    Capacity at Maximum Reach - 1850 lb -
    Rated Load Capacity - 5500 lb -
    Maximum Lift Height - 18.37 ft -
    Turning Radius - Over Tires - 12 × 16.5 Tires - 127 in -
    Top Travel Speed - 14 × 17.5 Tires - 17 mile/h -

    Operating Specifications - Universal Quick Coupler
    Capacity at Maximum Height - 3000 lb -
    Maximum Lift Height - 18.37 ft -
    Maximum Forward Reach - 10.83 ft -
    Turning Radius - Over Tires - 14 × 17.5 Tires - 125 in -
    Top Travel Speed - 12 × 16.5 Tires - 15 mile/h -
    Top Travel Speed - 14 × 17.5 Tires - 17 mile/h -
    Rated Load Capacity - 5500 lb -
    Turning Radius - Over Tires - 12 × 16.5 Tires - 127 in -
    Capacity at Maximum Reach - 1700 lb -

    Hydraulic System
    Pump Type - - Variable displacement load sensing axial piston pump
    Auxiliary Hydraulic Pressure - - 3307 psi
    Auxiliary Hydraulic Flow - - 25 gal/min

    Transmission Speeds
    Forward - - 4 Speeds
    Reverse - - 3 Speeds

    Optional Work Tool Attachments
    Carriages: Standard Tilt - Option 3 - - 72 in
    Fork Mounted - Work Platform - - 1220 mm × 2438 mm (4 ft × 8 ft)
    Carriages: Standard Tilt - Option 1 - - 50 in
    Forks: Pallet - Option 2 - - 60 in
    Carriages: Side Tilt - Option 1 - - 50 in
    Truss with Winch - Option 1 - - 3 ft
    Truss with Winch - Option 2 - - 12 ft
    Carriages: Dual Hydraulic Fork Positioner - Option 1 - - 50 in
    Buckets: Multi Purpose - - 1.3 yd³
    Carriages: Dual Hydraulic Fork Positioner - Option 2 - - 72 in
    Forks: Pallet - Option 3 - - 72 in
    Material Handling Arm - - Adjustable 2-4 m (Adjustable 6.7-13.2 ft)
    Forks: Lumber - - 60 in
    Forks: Pallet - Option 1 - - 48 in
    Carriages: Swing, 100° - - 72 in
    Fork Extensions* - - 90 in
    Buckets: General Purpose - Option 2 - - 2 yd³
    Buckets: Grapple - - 1.7 yd³
    Carriages: Standard Tilt - Option 2 - - 60 in
    Fork Mounted - Hook - - Lifting Hook
    Carriages: Side Tilt - Option 2 - - 72 in
    Truss Booms - Option 2 - - 15 ft
    Forks: Block/Cubing - - 48 in
    Buckets: General Purpose - Option 1 - - 1.3 yd³
    Note - - *For use with 1525 mm (60 in) forks or larger
    Truss Booms - Option 1 - - 12 ft
    Carriages: Side Shift - - 50 in
    Fork Mounted - Truss Boom - - Adjustable 2.1-3.6 m (Adjustable 7-12 ft)
    Coupler - - Hydraulic IT Coupler (Includes Auxiliary Electronics)
    Fork Mounted - Hopper - - Trash Hopper
    Add a Similar Product:
    • TL1255 Telehandler Add
    • TL642 w/StabilizersTelehandler Add
    • TL943 Telehandler Add
    • TL642 Telehandler Add