CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    TL943 Telehandler
    View Product
    TL642 Telehandler
    View Product Remove
    TL1255 Telehandler
    View Product Remove

    Operating Specifications
    Rated Load Capacity 9000 lb 6500 lb 12000 lb
    Maximum Lift Height 43 ft 42 ft 54.9 ft
    Capacity at Maximum Lift Height 7000 lb - -
    Capacity at Maximum Reach 1200 lb 700 lb -
    Maximum Forward Reach 31 ft 30 ft 42 ft
    Top Travel Speed 18 mile/h 19 mile/h 21 mile/h
    Drawbar Pull - Loaded - 20670 lbf 26510 lb
    Turning Radius - Over Tires - 12 ft 14.1 ft
    Frame Leveling - 10° 10°
    Capacity at Maximum Height - 6500 lb -
    Maximum Lift Height (o/r Down) - - 54.9 ft
    Capacity at Maximum Height (o/r Down) - - 5000 lb
    Capacity at Maximum Reach (o/r Down) - - 3500 lb
    Operating Weight - - 34182 lb
    Maximum Rated Load Capacity - - 12000 lb

    Engine
    Engine Model Cat® C3.6L Cat® C3.6L Cat® C3.6L*
    Gross Power - Basic 73.7 HP 73.7 HP 134 HP
    Gross Power - Premium 111 HP - -
    Note *Meets U.S. EPA Tier 4 Final emission standards. Meets U.S. EPA Tier 4 Final emission standards. *Meets U.S. EPA Tier 4 Final emission standards.

    Weights
    Operating Weight 25750 lb 22002 lb -

    Dimensions
    Height 8.16 ft 8 ft -
    Width 8 ft 8 ft -
    Wheel Base 11.25 ft 11.25 ft -
    Length - Fork Face 20.5 ft 18.5 ft -
    Ground Clearance 17 in 17 in -
    Turning Radius - Over Tires 12 ft 12 ft -

    Tires
    Standard 370/75-28 Duraforce Air 370/75-28 Duraforce Air 400/75-28 Duraforce Air
    Optional (1) 370/75-28 Duraforce Foam Fill 370/75-28 Duraforce Foam Fill -
    Optional (2) 315/95-28 Telemaster Solid 315/95-28 Telemaster Solid -
    Optional (3) 14.00-24 16PR Air 13.00-24 16PR Air -
    Optional (4) 14.00-24 12PR Foam 13.00-24 12PR Foam -
    Optional (5) 370/75-28 Non-Marking Air 370/75-28 Non-Marking Air -
    Optional 370/75-28 Non-Marking Foam 370/75-28 Non-Marking Foam 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 17.5 × 25 16PR Air; 17.5 × 25 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam

    Service Refill Capacities
    Fuel Tank 38 gal (US) 38.3 gal (US) 38 gal (US)
    Hydraulic System 47 gal (US) 42 gal (US) 50 gal (US)
    Diesel Exhaust Fluid 5.7 gal (US) - -
    Diesel Exhaust Fluid (DEF) Tank - - 5.7 gal (US)

    Boom Performance
    Boom Up 9.9 s 15 s 17 s
    Boom Down 8.5 s 10.3 s 14.4 s
    Tele In 14.6 s 9.5 s 15.3 s
    Tele Out 14.5 s 16.3 s 19.7 s
    Drawbar Pull - Premium 25589 lb - -

    Braking System
    Parking Brake Spring-applied hydraulic release on front axle - -
    Parking Brakes - Wet disc, spring applied hydraulic release on front axle Wet disc, spring applied hydraulic release on front axle
    Service Brakes - Inboard wet disc brakes on front and rear axles Inboard wet disc brakes on front and rear axles

    Brakes
    Features Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle - -

    Operator Station
    Features Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab - -

    Instrumentation
    Features Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge - -

    Work Tools
    Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) -
    Carriages - Standard Tilt 50 in 50 in -
    Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) -
    Carriages - Side Shift 50 in 50 in -
    Carriages - Dual Fork Positioning 50 in 50 in -
    Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) -
    Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) -
    Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) -
    Pallet Forks - Option 3 [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) -

    Hydraulic System
    Gear Pump - Single-section -
    Auxiliary Hydraulic Pressure - 3481 psi 3307 psi
    Auxiliary Hydraulic Flow - 18 gal/min 25 gal/min
    Pump Type - - Variable displacement load sensing axial piston pump

    Axles
    Type (1) - Trunnion mounted planetary 55 degree steer axles. -
    Type (2) - High bias limited slip differential on front axle. -
    Types (1) - - Trunnion mounted planetary 55-degree steer axles
    Types (2) - - High bias limited slip differential on front axle

    Transmission Speeds
    Forward - 4 speed 4 Speeds
    Reverse - 3 speed 3 Speeds

    Optional Work Tool Attachments
    Carriages: Standard Tilt - Option 1 - - 50 in
    Truss with Winch - Option 1 - - 3 ft
    Carriages: Swing, 100° - - 72 in
    Carriages: Dual Hydraulic Fork Positioner - Option 2 - - 72 in
    Carriages: Dual Hydraulic Fork Positioner - Option 1 - - 50 in
    Buckets: General Purpose - Option 1 - - 1.3 yd³
    Truss Booms - Option 1 - - 12 ft
    Carriages: Standard Tilt - Option 3 - - 72 in
    Buckets: Multi Purpose - - 1.3 yd³
    Forks: Pallet - Option 2 - - 60 in
    Note - - *For use with 1525 mm (60 in) forks or larger
    Buckets: General Purpose - Option 2 - - 2 yd³
    Fork Extensions* - - 90 in
    Forks: Pallet - Option 1 - - 48 in
    Coupler - - Hydraulic IT Coupler (Includes Auxiliary Electronics)
    Material Handling Arm - - Adjustable 2-4 m (Adjustable 6.7-13.2 ft)
    Forks: Pallet - Option 3 - - 72 in
    Carriages: Side Tilt - Option 2 - - 72 in
    Forks: Block/Cubing - - 48 in
    Truss with Winch - Option 2 - - 12 ft
    Fork Mounted - Hook - - Lifting Hook
    Carriages: Side Shift - - 48 in
    Truss Booms - Option 2 - - 15 ft
    Buckets: Grapple - - 1.7 yd³
    Fork Mounted - Hopper - - Trash Hopper
    Carriages: Side Tilt - Option 1 - - 50 in
    Carriages: Standard Tilt - Option 2 - - 60 in
    Fork Mounted - Truss Boom - - Adjustable 2.1-3.6 m (Adjustable 7-12 ft)
    Fork Mounted - Work Platform - - 1220 mm × 2438 mm (4 ft × 8 ft)
    Add a Similar Product:
    • TL1055 Telehandler Add
    • TL943 w/Stabilizers Telehandler Add
    • TL642 w/StabilizersTelehandler Add
    • TH255C Telehandler Add