CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    TL642 w/StabilizersTelehandler
    View Product
    TL1055 Telehandler
    View Product Remove
    TL943 w/Stabilizers Telehandler
    View Product Remove

    Operating Specifications
    Rated Load Capacity 6500 lb 10000 lb 9000 lb
    Maximum Lift Height 42 ft 54.9 ft 43 ft
    Load at Maximum Height - Stabilizers Down 6500 lb - 7000 lb
    Maximum Forward Reach 30 ft 42 ft 31 ft
    Load at Maximum Reach - Stabilizers Down 1700 lb - 2700 lb
    Top Travel Speed 19 mile/h 21 mile/h 18 mile/h
    Capacity at Maximum Reach (o/r Down) - 2500 lb -
    Drawbar Pull - Loaded - 26510 lbf -
    Capacity at Maximum Height (o/r Down) - 5000 lb -
    Frame Leveling - 10° -
    Maximum Lift Height (o/r Down) - 54.9 ft -
    Turning Radius - Over Tires - 14.1 ft -
    Maximum Rated Load Capacity - 10000 lb -
    Operating Weight - 31700 lb -

    Engine
    Engine Model Cat® C3.6L Cat® C3.6L* Cat® C3.6L
    Gross Power - Basic 73.7 HP 134 HP 73.7 HP
    Note Meets U.S. EPA Tier 4 Final emission standards. *Meets U.S. EPA Tier 4 Final emission standards. *Meets U.S. EPA Tier 4 Final emission standards.
    Gross Power - Premium - - 111 HP

    Weights
    Operating Weight 22928 lb 31700 lb 26852 lb

    Dimensions
    Height 8 ft - 8.16 ft
    Width 8 ft - 8 ft
    Wheel Base 11.25 ft - 11.25 ft
    Length - Fork Face 18.5 ft - 20.5 ft
    Ground Clearance 17 in - 17 in
    Turning Radius - Over Tires 12 ft - 12 ft

    Tires
    Standard 370/75-28 Duraforce Air 400/75-28 Duraforce Air 370/75-28 Duraforce Air
    Optional (1) 370/75-28 Duraforce Foam Fill - 370/75-28 Duraforce Foam Fill
    Optional (2) 315/95-28 Telemaster Solid - 315/95-28 Telemaster Solid
    Optional (3) 13.00-24 16PR Air - 14.00-24 16PR Air
    Optional (4) 13.00-24 12PR Foam - 14.00-24 12PR Foam
    Optional (5) 370/75-28 Non-Marking Air - 370/75-28 Non-Marking Air
    Optional 370/75-28 Non-Marking Foam 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam 370/75-28 Non-Marking Foam

    Service Refill Capacities
    Fuel Tank 38.3 gal (US) 38 gal (US) 38 gal (US)
    Hydraulic System 42 gal (US) 49 gal (US) -
    Diesel Exhaust Fluid (DEF) Tank - 5.7 gal (US) -
    Hydraulic Tank - - 49 gal (US)

    Hydraulic System
    Pump Type Single-section Variable displacement load sensing axial piston pump -
    Auxiliary Hydraulic Pressure - 3307 psi -
    Auxiliary Hydraulic Flow - 25 gal/min -

    Boom Performance
    Boom Up 15.5 s 15 s 9.9 s
    Boom Down 10.7 s 13 s 8.5 s
    Tele In 11.8 s 15.3 s 14.6 s
    Tele Out 17 s 19.7 s 14.5 s
    Drawbar Pull - Basic 20670 lb - 22619 lb
    Drawbar Pull - Premium - - 25589 lb

    Braking System
    Parking Brake Spring-applied hydraulic release on front axle - Spring-applied hydraulic release on front axle
    Service Brakes - Inboard wet disc brakes on front and rear axles -
    Parking Brakes - Wet disc, spring applied hydraulic release on front axle -

    Brakes
    Features Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle - Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle

    Operator Station
    Features Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab - Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab

    Instrumentation
    Features Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge - Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge

    Work Tools
    Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) - [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
    Carriages - Side Shift 50 in - 50 in
    Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) - [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
    Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) - 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
    Carriages - Standard Tilt 50 in - 50 in
    Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) - [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
    Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) - [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
    Carriages - Dual Fork Positioning 50 in - 50 in
    Pallet Forks - Option 3 [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) - [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)

    Axles
    Types (1) - Trunnion mounted planetary 55-degree steer axles -
    Types (2) - High bias limited slip differential on front axle -

    Transmission Speeds
    Forward - 4 Speeds -
    Reverse - 3 Speeds -

    Optional Work Tool Attachments
    Carriages: Standard Tilt - Option 3 - 72 in -
    Fork Mounted - Work Platform - 1220 mm × 2438 mm (4 ft × 8 ft) -
    Carriages: Standard Tilt - Option 1 - 50 in -
    Forks: Pallet - Option 2 - 60 in -
    Carriages: Side Tilt - Option 1 - 50 in -
    Truss with Winch - Option 1 - 3 ft -
    Truss with Winch - Option 2 - 12 ft -
    Carriages: Dual Hydraulic Fork Positioner - Option 1 - 50 in -
    Buckets: Multi Purpose - 1.3 yd³ -
    Carriages: Dual Hydraulic Fork Positioner - Option 2 - 72 in -
    Forks: Pallet - Option 3 - 72 in -
    Material Handling Arm - Adjustable 2-4 m (Adjustable 6.7-13.2 ft) -
    Forks: Lumber - 60 in -
    Forks: Pallet - Option 1 - 48 in -
    Carriages: Swing, 100° - 72 in -
    Fork Extensions* - 90 in -
    Buckets: General Purpose - Option 2 - 2 yd³ -
    Buckets: Grapple - 1.7 yd³ -
    Carriages: Standard Tilt - Option 2 - 60 in -
    Fork Mounted - Hook - Lifting Hook -
    Carriages: Side Tilt - Option 2 - 72 in -
    Truss Booms - Option 2 - 15 ft -
    Forks: Block/Cubing - 48 in -
    Buckets: General Purpose - Option 1 - 1.3 yd³ -
    Note - *For use with 1525 mm (60 in) forks or larger -
    Truss Booms - Option 1 - 12 ft -
    Carriages: Side Shift - 50 in -
    Fork Mounted - Truss Boom - Adjustable 2.1-3.6 m (Adjustable 7-12 ft) -
    Coupler - Hydraulic IT Coupler (Includes Auxiliary Electronics) -
    Fork Mounted - Hopper - Trash Hopper -
    Add a Similar Product: