CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    TL642 w/StabilizersTelehandler
    View Product
    TL1055 Telehandler
    View Product Remove
    TL642 Telehandler
    View Product Remove

    Operating Specifications
    Rated Load Capacity 6500 lb 10000 lb 6500 lb
    Maximum Lift Height 42 ft 54.9 ft 42 ft
    Load at Maximum Height - Stabilizers Down 6500 lb - -
    Maximum Forward Reach 30 ft 42 ft 30 ft
    Load at Maximum Reach - Stabilizers Down 1700 lb - -
    Top Travel Speed 19 mile/h 21 mile/h 19 mile/h
    Capacity at Maximum Reach (o/r Down) - 2500 lb -
    Drawbar Pull - Loaded - 26510 lbf 20670 lbf
    Capacity at Maximum Height (o/r Down) - 5000 lb -
    Frame Leveling - 10° 10°
    Maximum Lift Height (o/r Down) - 54.9 ft -
    Turning Radius - Over Tires - 14.1 ft 12 ft
    Maximum Rated Load Capacity - 10000 lb -
    Operating Weight - 31700 lb -
    Capacity at Maximum Height - - 6500 lb
    Capacity at Maximum Reach - - 700 lb

    Engine
    Engine Model Cat® C3.6L Cat® C3.6L* Cat® C3.6L
    Gross Power - Basic 73.7 HP 134 HP 73.7 HP
    Note Meets U.S. EPA Tier 4 Final emission standards. *Meets U.S. EPA Tier 4 Final emission standards. Meets U.S. EPA Tier 4 Final emission standards.

    Weights
    Operating Weight 22928 lb 31700 lb 22002 lb

    Dimensions
    Height 8 ft - 8 ft
    Width 8 ft - 8 ft
    Wheel Base 11.25 ft - 11.25 ft
    Length - Fork Face 18.5 ft - 18.5 ft
    Ground Clearance 17 in - 17 in
    Turning Radius - Over Tires 12 ft - 12 ft

    Tires
    Standard 370/75-28 Duraforce Air 400/75-28 Duraforce Air 370/75-28 Duraforce Air
    Optional (1) 370/75-28 Duraforce Foam Fill - 370/75-28 Duraforce Foam Fill
    Optional (2) 315/95-28 Telemaster Solid - 315/95-28 Telemaster Solid
    Optional (3) 13.00-24 16PR Air - 13.00-24 16PR Air
    Optional (4) 13.00-24 12PR Foam - 13.00-24 12PR Foam
    Optional (5) 370/75-28 Non-Marking Air - 370/75-28 Non-Marking Air
    Optional 370/75-28 Non-Marking Foam 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 14.00-24 16PR Air; 14.00-24 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam 370/75-28 Non-Marking Foam

    Service Refill Capacities
    Fuel Tank 38.3 gal (US) 38 gal (US) 38.3 gal (US)
    Hydraulic System 42 gal (US) 49 gal (US) 42 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - 5.7 gal (US) -

    Hydraulic System
    Pump Type Single-section Variable displacement load sensing axial piston pump -
    Auxiliary Hydraulic Pressure - 3307 psi 3481 psi
    Auxiliary Hydraulic Flow - 25 gal/min 18 gal/min
    Gear Pump - - Single-section

    Boom Performance
    Boom Up 15.5 s 15 s 15 s
    Boom Down 10.7 s 13 s 10.3 s
    Tele In 11.8 s 15.3 s 9.5 s
    Tele Out 17 s 19.7 s 16.3 s
    Drawbar Pull - Basic 20670 lb - -

    Braking System
    Parking Brake Spring-applied hydraulic release on front axle - -
    Service Brakes - Inboard wet disc brakes on front and rear axles Inboard wet disc brakes on front and rear axles
    Parking Brakes - Wet disc, spring applied hydraulic release on front axle Wet disc, spring applied hydraulic release on front axle

    Brakes
    Features Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle - -

    Operator Station
    Features Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab - -

    Instrumentation
    Features Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge - -

    Work Tools
    Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) - [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
    Carriages - Side Shift 50 in - 50 in
    Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) - [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
    Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) - 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
    Carriages - Standard Tilt 50 in - 50 in
    Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) - [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
    Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) - [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
    Carriages - Dual Fork Positioning 50 in - 50 in
    Pallet Forks - Option 3 [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) - [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)

    Axles
    Types (1) - Trunnion mounted planetary 55-degree steer axles -
    Types (2) - High bias limited slip differential on front axle -
    Type (1) - - Trunnion mounted planetary 55 degree steer axles.
    Type (2) - - High bias limited slip differential on front axle.

    Transmission Speeds
    Forward - 4 Speeds 4 speed
    Reverse - 3 Speeds 3 speed

    Optional Work Tool Attachments
    Carriages: Standard Tilt - Option 3 - 72 in -
    Fork Mounted - Work Platform - 1220 mm × 2438 mm (4 ft × 8 ft) -
    Carriages: Standard Tilt - Option 1 - 50 in -
    Forks: Pallet - Option 2 - 60 in -
    Carriages: Side Tilt - Option 1 - 50 in -
    Truss with Winch - Option 1 - 3 ft -
    Truss with Winch - Option 2 - 12 ft -
    Carriages: Dual Hydraulic Fork Positioner - Option 1 - 50 in -
    Buckets: Multi Purpose - 1.3 yd³ -
    Carriages: Dual Hydraulic Fork Positioner - Option 2 - 72 in -
    Forks: Pallet - Option 3 - 72 in -
    Material Handling Arm - Adjustable 2-4 m (Adjustable 6.7-13.2 ft) -
    Forks: Lumber - 60 in -
    Forks: Pallet - Option 1 - 48 in -
    Carriages: Swing, 100° - 72 in -
    Fork Extensions* - 90 in -
    Buckets: General Purpose - Option 2 - 2 yd³ -
    Buckets: Grapple - 1.7 yd³ -
    Carriages: Standard Tilt - Option 2 - 60 in -
    Fork Mounted - Hook - Lifting Hook -
    Carriages: Side Tilt - Option 2 - 72 in -
    Truss Booms - Option 2 - 15 ft -
    Forks: Block/Cubing - 48 in -
    Buckets: General Purpose - Option 1 - 1.3 yd³ -
    Note - *For use with 1525 mm (60 in) forks or larger -
    Truss Booms - Option 1 - 12 ft -
    Carriages: Side Shift - 50 in -
    Fork Mounted - Truss Boom - Adjustable 2.1-3.6 m (Adjustable 7-12 ft) -
    Coupler - Hydraulic IT Coupler (Includes Auxiliary Electronics) -
    Fork Mounted - Hopper - Trash Hopper -
    Add a Similar Product:
    • TL1255 Telehandler Add
    • TL943 Telehandler Add
    • TL943 w/Stabilizers Telehandler Add
    • TH255C Telehandler Add