CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    TL642 Telehandler
    View Product
    TH255C Telehandler
    View Product Remove
    TL1255 Telehandler
    View Product Remove

    Operating Specifications
    Rated Load Capacity 6500 lb 5500 lb 12000 lb
    Maximum Lift Height 42 ft 18.37 ft 54.9 ft
    Maximum Forward Reach 30 ft - 42 ft
    Top Travel Speed 19 mile/h - 21 mile/h
    Drawbar Pull - Loaded 20670 lbf - 26510 lb
    Turning Radius - Over Tires 12 ft - 14.1 ft
    Frame Leveling 10° - 10°
    Capacity at Maximum Height 6500 lb - -
    Capacity at Maximum Reach 700 lb - -
    Maximum Lift Height (o/r Down) - - 54.9 ft
    Capacity at Maximum Height (o/r Down) - - 5000 lb
    Capacity at Maximum Reach (o/r Down) - - 3500 lb
    Operating Weight - - 34182 lb
    Maximum Rated Load Capacity - - 12000 lb

    Engine
    Engine Model Cat® C3.6L TD 2.9L L4* Cat® C3.6L*
    Gross Power - Basic 73.7 HP - 134 HP
    Note Meets U.S. EPA Tier 4 Final emission standards. *Emits equivalent to U.S. EPA Tier 4 Interim *Meets U.S. EPA Tier 4 Final emission standards.
    Gross Power - 74 HP -
    Displacement - 177 in³ -
    Maximum Torque - 1,800 rpm - 193 lb/ft -

    Weights
    Operating Weight 22002 lb - -
    Operating Weight - With Carriage and Forks - 11000 lb -

    Dimensions
    Height 8 ft - -
    Width 8 ft - -
    Wheel Base 11.25 ft - -
    Length - Fork Face 18.5 ft - -
    Ground Clearance 17 in - -
    Turning Radius - Over Tires 12 ft - -

    Tires
    Standard 370/75-28 Duraforce Air 12.00 × 16.5 400/75-28 Duraforce Air
    Optional (1) 370/75-28 Duraforce Foam Fill - -
    Optional (2) 315/95-28 Telemaster Solid - -
    Optional (3) 13.00-24 16PR Air - -
    Optional (4) 13.00-24 12PR Foam - -
    Optional (5) 370/75-28 Non-Marking Air - -
    Optional 370/75-28 Non-Marking Foam 14.00 × 17.5; 10.5 × 18; 33 × 12-20 non-marking 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 17.5 × 25 16PR Air; 17.5 × 25 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam

    Service Refill Capacities
    Fuel Tank 38.3 gal (US) 24 gal (US) 38 gal (US)
    Hydraulic System 42 gal (US) 24 gal (US) 50 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - 5.7 gal (US)

    Boom Performance
    Boom Up 15 s 6.8 s 17 s
    Boom Down 10.3 s 4.6 s 14.4 s
    Tele In 9.5 s 3.8 s 15.3 s
    Tele Out 16.3 s 6.7 s 19.7 s
    Bucket Dump - 2.5 s -
    Drawbar Pull - Loaded - 8700 lb -
    Bucket Crowd - 2 s -

    Hydraulic System
    Gear Pump Single-section - -
    Auxiliary Hydraulic Pressure 3481 psi - 3307 psi
    Auxiliary Hydraulic Flow 18 gal/min - 25 gal/min
    Pump Type - - Variable displacement load sensing axial piston pump

    Braking System
    Parking Brakes Wet disc, spring applied hydraulic release on front axle Wet disc spring-applied hydraulic release Wet disc, spring applied hydraulic release on front axle
    Service Brakes Inboard wet disc brakes on front and rear axles Inboard wet disc brakes on front axle Inboard wet disc brakes on front and rear axles

    Axles
    Type (1) Trunnion mounted planetary 55 degree steer axles. - -
    Type (2) High bias limited slip differential on front axle. - -
    Types (1) - Planetary on front and rear axles. Trunnion mounted planetary 55-degree steer axles
    Types (2) - High bias limited slip differential on front axle. High bias limited slip differential on front axle

    Work Tools
    Carriages - Dual Fork Positioning 50 in - -
    Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) - -
    Pallet Forks - Option 3 [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) - -
    Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) - -
    Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) - -
    Carriages - Standard Tilt 50 in - -
    Carriages - Side Shift 50 in - -
    Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) - -
    Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) - -

    Transmission Speeds
    Forward 4 speed - 4 Speeds
    Reverse 3 speed - 3 Speeds

    Brakes
    Feature - Light on dash indicates when brake is on. -

    Transmission
    Forward - Variable Speed -
    Transmission - Hydrostatic -
    Reverse - Variable Speed -

    Instruments
    Types (1) - Indicators for machine hours, fuel-level, steer mode, steering pressure, battery charge, coolant temperature, parking brake and engine pre-heat. -
    Types (3) - Panel and switches are illuminated for night operation. -
    Types (2) - Reverse motion alarm. -

    Hydraulic System - Implement
    Maximum Auxiliary Flow - 19 gal/min -
    Note - Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls, and hydraulic lines. -
    Maximum System Pressure - 3500 psi -
    Pump Type - Gear pump -

    Operating Specifications - Standard Coupler
    Capacity at Maximum Height - 4400 lb -
    Maximum Forward Reach - 10.83 ft -
    Turning Radius - Over Tires - 14 × 17.5 Tires - 125 in -
    Top Travel Speed - 12 × 16.5 Tires - 15 mile/h -
    Capacity at Maximum Reach - 1850 lb -
    Rated Load Capacity - 5500 lb -
    Maximum Lift Height - 18.37 ft -
    Turning Radius - Over Tires - 12 × 16.5 Tires - 127 in -
    Top Travel Speed - 14 × 17.5 Tires - 17 mile/h -

    Operating Specifications - Universal Quick Coupler
    Capacity at Maximum Height - 3000 lb -
    Maximum Lift Height - 18.37 ft -
    Maximum Forward Reach - 10.83 ft -
    Turning Radius - Over Tires - 14 × 17.5 Tires - 125 in -
    Top Travel Speed - 12 × 16.5 Tires - 15 mile/h -
    Top Travel Speed - 14 × 17.5 Tires - 17 mile/h -
    Rated Load Capacity - 5500 lb -
    Turning Radius - Over Tires - 12 × 16.5 Tires - 127 in -
    Capacity at Maximum Reach - 1700 lb -

    Optional Work Tool Attachments
    Carriages: Standard Tilt - Option 1 - - 50 in
    Truss with Winch - Option 1 - - 3 ft
    Carriages: Swing, 100° - - 72 in
    Carriages: Dual Hydraulic Fork Positioner - Option 2 - - 72 in
    Carriages: Dual Hydraulic Fork Positioner - Option 1 - - 50 in
    Buckets: General Purpose - Option 1 - - 1.3 yd³
    Truss Booms - Option 1 - - 12 ft
    Carriages: Standard Tilt - Option 3 - - 72 in
    Buckets: Multi Purpose - - 1.3 yd³
    Forks: Pallet - Option 2 - - 60 in
    Note - - *For use with 1525 mm (60 in) forks or larger
    Buckets: General Purpose - Option 2 - - 2 yd³
    Fork Extensions* - - 90 in
    Forks: Pallet - Option 1 - - 48 in
    Coupler - - Hydraulic IT Coupler (Includes Auxiliary Electronics)
    Material Handling Arm - - Adjustable 2-4 m (Adjustable 6.7-13.2 ft)
    Forks: Pallet - Option 3 - - 72 in
    Carriages: Side Tilt - Option 2 - - 72 in
    Forks: Block/Cubing - - 48 in
    Truss with Winch - Option 2 - - 12 ft
    Fork Mounted - Hook - - Lifting Hook
    Carriages: Side Shift - - 48 in
    Truss Booms - Option 2 - - 15 ft
    Buckets: Grapple - - 1.7 yd³
    Fork Mounted - Hopper - - Trash Hopper
    Carriages: Side Tilt - Option 1 - - 50 in
    Carriages: Standard Tilt - Option 2 - - 60 in
    Fork Mounted - Truss Boom - - Adjustable 2.1-3.6 m (Adjustable 7-12 ft)
    Fork Mounted - Work Platform - - 1220 mm × 2438 mm (4 ft × 8 ft)
    Add a Similar Product:
    • TL1055 Telehandler Add
    • TL943 w/Stabilizers Telehandler Add
    • TL642 w/StabilizersTelehandler Add
    • TL943 Telehandler Add