Compare Equipment Go Back
|
|
 MH3260 Tracked Material Handler |
|
|
Engine |
|||
|---|---|---|---|
| Engine Model | - | Cat C13 | - |
| Net Power - ISO 9249 | - | 424 HP | - |
| Net Power - ISO 9249 (DIN) | - | 430 hp (metric) | - |
| Engine Power - ISO 14396 | - | 425 HP | - |
| Engine Power - ISO 14396 (DIN) | - | 431 hp (metric) | - |
| Bore | - | 5 in | - |
| Stroke | - | 6 in | - |
| Displacement | - | 763 in³ | - |
| Biodiesel Capability | - | Up to B20¹ | - |
| Emissions | - | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | - |
| Note (1) | - | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the time | - |
| Note (2) | - | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | - |
Weights |
|||
| Operating Weight | - | 133200 lb | - |
Working Ranges |
|||
| Maximum Reach | - | 59.1 ft | - |
| Boom | - | MH Boom 9.9m (32'6") | - |
| Stick | - | Industrial 9.1 m (29'10") | - |
| Maximum Height | - | 58.5 ft | - |
| Minimum Height | - | 10 ft | - |
| Minimum Swing Radius-Front | - | 13.1 ft | - |
| Maximum Depth | - | 26.8 ft | - |
| Boom Pin Height | - | 39.8 ft | - |
Transmission |
|||
| Gradeability | - | 30°/58% | - |
| Maximum Travel Speed | - | 3 mile/h | - |
| Maximum Drawbar Pull | - | 53729 lbf | - |
Hydraulic System |
|||
| Main System - Maximum Flow (× 2 pumps) - Travel | - | 206 gal(US)/min | - |
| Maximum Pressure - Implements | - | 5076 psi | - |
| Maximum Pressure - Travel | - | 5076 psi | - |
| Maximum Pressure - Swing | - | 3771 psi | - |
Service Refill Capacities |
|||
| Fuel Tank Capacity | - | 188.9 gal (US) | - |
| Cooling System | - | 13.7 gal (US) | - |
| Engine Oil (with filter) | - | 10.6 gal (US) | - |
| Swing Drive - Each | - | 2.8 gal (US) | - |
| Final Drive - Each | - | 4 gal (US) | - |
| Hydraulic System - Including Tank | - | 145.3 gal (US) | - |
| Hydraulic Tank | - | 57.3 gal (US) | - |
| DEF Tank | - | 12.2 gal (US) | - |
Swing Mechanism |
|||
| Swing Speed | - | 8 r/min | - |
| Swing Torque | - | 137924 ft·lbf | - |
Dimensions |
|||
| Boom | - | MH 9.9 m (32'6") | - |
| Stick | - | Industrial 9.1 m (29'10") | - |
| Shipping Height (with OPG, without stick) | - | 11.8 ft | - |
| Shipping Length (without stick) | - | 45 ft | - |
| Machine Length (with boom/stick) | - | 46.5 ft | - |
| Tail Swing Radius | - | 12.3 ft | - |
| Counterweight Clearance | - | 4.7 ft | - |
| Cab Height-Lowered | - | 11.6 ft | - |
| Cab Height-Lowered with OPG | - | 11.8 ft | - |
| Cab Height-Raised | - | 19.8 ft | - |
| Cab Height-Raised with OPG | - | 20.3 ft | - |
| Ground Clearance | - | 2.33 ft | - |
| Track Length to Center of Rollers | - | 14.3 ft | - |
| Track Length | - | 17.6 ft | - |
| Upper Frame Width (includes walkways and handrails) | - | 12.6 ft | - |
| Track Gauge-Retracted | - | 10.6 ft | - |
| Track Gauge- Extended | - | 12.2 ft | - |
| Undercarriage Width-Retracted,750 mm (30”) shoes | - | 13.2 ft | - |
Air Conditioning System |
|||
| Note (1) | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg (2.64 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.892 tons). | - |
Add a Similar Product:
There are no similar products.