CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D5 Dozer
    View Product
    854 Wheel Dozer
    View Product Remove
    D11 Dozer
    View Product Remove

    Engine
    Engine Model Cat C7.1 Cat C32B -
    Power - Net 170 HP - -
    Net Power - Rated - ISO 9249/SAE J1349 170 HP - -
    Net Power (Rated) - ISO 9249 (DIN) 172 mhp - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)/Korea Stage V - -
    Note (1) Rated horsepower at 1770 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. -
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( Net torque rise meets SAE J139. -
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. No engine derating required up to 3050 m (10,000 ft) altitude. -
    Note (4) Machine Build Number 17B - -
    Gross Power - 907 HP -
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - 900 HP -
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - 814 HP -
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - 907 HP -
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - 823 HP -
    Rated Speed - 1750 r/min -
    Bore - 5.7 in -
    Stroke - 6.4 in -
    Displacement - 1958 in² -
    Peak Torque - 1,200 rpm - 3139 lb/ft -
    Torque Rise - 30 % -

    Weights
    Operating Weight 42263 lb 224647 lb 229800 lb
    Operating Weight - Carrydozer - - 250665 lb
    Note (1) - - D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
    Note (2) - - D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.

    Transmission
    Power Train Fully Automatic 3-Speed - -
    Transmission Type - Cat Planetary Power Shift -
    Converter Drive - Forward 1 - 4.4 mile/h -
    Converter Drive - Forward 2 - 7.7 mile/h -
    Converter Drive - Forward 3 - 13.2 mile/h -
    Converter Drive - Reverse 1 - 4.8 mile/h -
    Converter Drive - Reverse 2 - 8.4 mile/h -
    Converter Drive - Reverse 3 - 14.6 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 8.1 mile/h -
    Direct Drive - Forward 3 - 14.2 mile/h -
    Direct Drive - Reverse 1 - 5 mile/h -
    Direct Drive - Reverse 2 - 8.9 mile/h -
    Direct Drive - Reverse 3 - 15.6 mile/h -
    Note - Travel speeds based on 45/65-45 L-5 46 ply tires. -
    1.0 Forward - - 2.5 mile/h
    2.0 Forward - - 4.4 mile/h
    3.0 Forward - - 7.6 mile/h
    1.0 Reverse - - 3 mile/h
    2.0 Reverse - - 5.3 mile/h
    3.0 Reverse - - 9.1 mile/h
    Drawbar Pull - 3 Forward - - 46250 ft·lbf
    Drawbar Pull - 1 Forward - - 148200 ft·lbf
    Drawbar Pull - 2 Forward - - 82300 ft·lbf

    Service Refill Capacities
    Fuel Tank 83.2 gal (US) - -
    DEF Tank 4.2 gal (US) - -
    Fuel Tank - Standard - 413 gal (US) -
    Cooling System - 53 gal (US) 46.8 gal (US)
    Crankcase - 32 gal (US) -
    Transmission - 45 gal (US) -
    Differential - Final Drives - Front - 98 gal (US) -
    Differential - Final Drives - Rear - 90 gal (US) -
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - 77 gal (US) -
    Note (1) - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo -
    Cooling System Refill - Tier 2 Equivalent Engine - - 41.7 gal (US)
    Engine Crankcase - - 35.1 gal (US)
    Power Train - - 120 gal (US)
    Power Train - Refill Volume - - 103.3 gal (US)
    Final Drive - Each - - 12.4 gal (US)
    Roller Frames - Each - - 24.8 gal (US)
    Hydraulic Tank - - 42.2 gal (US)
    Hydraulic System Tank and Chassis - - 64.7 gal (US)
    Hydraulic System Chassis + Blade and Ripper (Standard) - - 117.6 gal (US)
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - - 143.4 gal (US)

    VPAT
    Operating Weight 37875 lb - -
    Ground Pressure 6.9 psi - -
    Width of Standard Shoe 24 in - -
    Blade VPAT - -
    Blade Capacity 4.6 yd³ - -

    LGP VPAT
    Operating Weight 42263 lb - -
    Ground Pressure 4.7 psi - -
    Width of Standard Shoe 33 in - -
    Blade LGP VPAT - -
    Blade Capacity 5.5 yd³ - -

    Fine Grading VPAT
    Operating Weight 39198 lb - -
    Ground Pressure 6 psi - -
    Width of Standard Shoe 24 in - -
    Blade VPAT - -
    Blade Capacity 4.6 yd³ - -

    Push Arm
    Operating Weight 38228 lb - -
    Ground Pressure 7 psi - -
    Width of Standard Shoe 24 in - -
    Blade Semi-Universal (SU) - -
    Blade Capacity 5.6 yd³ - -

    Sustainability
    Recyclability 97% - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -
    Note (1) - - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)

    Note (1) Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. - -

    Hydraulic System - Lift/Tilt
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - 161 gal/min -
    Cylinders, Double Acting - Lift, Bore and Stroke - 177 mm × 1760 mm (0.58 ft × 5.8 ft) -
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 267 mm × 286 mm (0.88 ft × 0.94 ft) -

    Axles
    Front - Fixed -
    Rear - Trunnion -

    Brakes
    Brakes - Meets ISO 3540:2011 -

    Blades
    Blade Capacities - 30.5 to 44.8 m3 (40 to 58.6 yd3) -
    Semi-Universal (SU)* Capacity - - 35.6 yd³
    Semi-Universal (SU)* Width Over Endbits - - 219.8 in
    U-Blade Capacity - - 45 yd³
    U-Blade Width - - 249.6 in
    Reclamation Universal - Blade capacity (SAE J1265) - - 55 yd³
    Reclamation Universal - Width with blade (over end bits) - - 251.8 in
    Carry Dozer - Blade capacity (SAE J1265) - - 57 yd³
    Carry Dozer - Width with blade (over end bits) - - 263.9 in

    Dimensions (Approximate)
    Height - Top of ROPS - 18.25 ft -
    Height - Top of Exhaust Pipe - 17.17 ft -
    Height - Top of Hood - 13 ft -
    Ground Clearance - 27 in -
    Centerline of Front Axle to Hitch - 9.67 ft -
    Centerline of Rear Axle to Edge of Bumper - 13.75 ft -
    Wheel Base - 19.25 ft -
    Length - With Blade on Ground - 44 ft -

    Hydraulic System - Steering
    Steering System - Pump - Piston, variable displacement -
    Minimum Turning Radius - Over Blade - 31 ft -
    Steering System - Circuit - Pilot, load sensing -
    Total Steering Angle - 86 degrees -
    Relief Valve Setting - 5004 psi -

    Operating Specifications
    Operating Weight - 224647 lb -

    Sound Performance Levels
    Sound Performance - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was -

    Cab
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - - Cat® C32
    Engine Power - Net SAE J1349/ISO 9249 - Forward - - 850 HP
    Displacement - - 1959 in³
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - - 955 HP
    Note (1) - - *Excludes all fan losses.
    Note (2) - - Engine ratings apply at 1,800 rpm.
    Note (3) - - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - - Cat® C32
    Displacement - - 1959 in³
    Engine Power - Net SAE J1349/ISO 9249 - Forward - - 850 HP
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - - 957 HP
    Note (1) - - *Excludes all fan losses.
    Note (2) - - Engine ratings apply at 1,800 rpm.
    Note (3) - - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.

    Fuel Tank Capacities
    Fuel Tank - Total Volume - - 500 gal (US)
    Fuel Tank - Usable Volume - - 475 gal (US)

    Hydraulic Controls
    Pump Type - - Variable displacement piston pump
    Combined Pump Output - Implement - - 177 gal/min

    Undercarriage
    Shoe Type - - Extreme Service
    Width - Shoe - - 28 in
    Width - Shoe - CD - - 36 in
    Shoes/Side - - 41
    Grouser Height - - 4 in
    Pitch - - 12.5 in
    Ground Clearance* - - 30.6 in
    Track Gauge - - 114 in
    Length - Track on Ground - - 175 in
    Ground Contact Area - - 9781 in²
    Ground Contact Area - CD - - 12605 in²
    Track Rollers/Side - - 8
    Number of Carrier Rollers - - 1 per side (optional)

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - - 66000 lb
    Maximum penetration depth (standard tip) - - 63.5 in
    Pryout Force - - 148510 lb

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - - 66110 lb
    Maximum penetration depth (standard tip) - - 85.5 in
    Pryout Force - - 148510 lb

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - - 131.1 in
    Maximum Penetration Force - Shank Vertical - - 77350 lb
    Maximum Penetration - Standard Tip - - 43.3 in
    Pry-Out Force - Multi-Shank Ripper with One Tooth - - 145640 lb

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - - 149.8 in
    Length with SU-Blade** - No rear attachment - - 345.1 in
    Overall Length SU-Blade and SS Ripper** - - 421.7 in

    Standards
    ROPS - - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
    FOPS - - Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
    Sound (1) - - The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
    Sound (2) - - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).

    Dimensions - D11
    Ground Clearance* - - 31.4 in
    Track Gauge - - 114 in
    Width at Outside of Track (710 mm Track Shoe) - - 142 in
    Height (ROPS/canopy)* - - 185.9 in
    Length of Track on Ground - - 175 in
    Length with SU-Blade** - No rear attachment - - 337.8 in
    Overall Length SU-Blade and SS Ripper** - - 414.4 in
    Note - - *Includes grouser height for total dimensions on hard surfaces.
    Add a Similar Product: