|
|
|
|
|
Engine |
Engine Model |
Cat C7.1 |
Cat C9.3B |
Cat® C18 |
- |
Power - Net |
170 HP |
215 HP |
- |
- |
Net Power - Rated - ISO 9249/SAE J1349 |
170 HP |
215 HP |
- |
- |
Net Power (Rated) - ISO 9249 (DIN) |
172 mhp |
219 mhp |
- |
- |
Emissions |
U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)/Korea Stage V |
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V |
U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. |
- |
Note (1) |
Rated horsepower at 1770 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at |
Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a |
- |
- |
Note (2) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( |
- |
- |
Note (3) |
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. |
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. |
- |
- |
Note (4) |
Machine Build Number 17B |
Machine Build Number 20B |
- |
- |
Rated Speed |
- |
- |
1900 r/min |
- |
Peak Power Speed |
- |
- |
1500 r/min |
- |
Gross Power - SAE J1995 |
- |
- |
562 HP |
- |
Net Power - SAE J1349 |
- |
- |
496 HP |
- |
Bore |
- |
- |
5.7 in |
- |
Stroke |
- |
- |
7.2 in |
- |
Displacement |
- |
- |
1105 in³ |
- |
Peak Torque - 1,300 rpm |
- |
- |
2092 lb/ft |
- |
Torque Rise |
- |
- |
52 % |
- |
Weights |
Operating Weight |
42263 lb |
51333 lb |
- |
229800 lb |
Operating Weight - Carrydozer |
- |
- |
- |
250665 lb |
Note (1) |
- |
- |
- |
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. |
Note (2) |
- |
- |
- |
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. |
Transmission |
Power Train |
Fully Automatic 3-Speed |
Electric Drive |
- |
- |
Transmission Type |
- |
- |
Cat planetary power shift |
- |
Forward - 1 |
- |
- |
4.2 mile/h |
- |
Forward - 2 |
- |
- |
7.2 mile/h |
- |
Forward - 3 |
- |
- |
12.6 mile/h |
- |
Forward - 4 |
- |
- |
22 mile/h |
- |
Reverse - 1 |
- |
- |
4.2 mile/h |
- |
Reverse - 2 |
- |
- |
7.6 mile/h |
- |
Reverse - 3 |
- |
- |
13.3 mile/h |
- |
Direct Drive - Forward 1 |
- |
- |
Lock-up disabled |
- |
Direct Drive - Forward 2 |
- |
- |
7.7 mile/h |
- |
Direct Drive - Forward 3 |
- |
- |
13.7 mile/h |
- |
Direct Drive - Forward 4 |
- |
- |
23.9 mile/h |
- |
Direct Drive - Reverse 1 |
- |
- |
4.5 mile/h |
- |
Direct Drive - Reverse 2 |
- |
- |
8.1 mile/h |
- |
Direct Drive - Reverse 3 |
- |
- |
14.3 mile/h |
- |
1.0 Forward |
- |
- |
- |
2.5 mile/h |
2.0 Forward |
- |
- |
- |
4.4 mile/h |
3.0 Forward |
- |
- |
- |
7.6 mile/h |
1.0 Reverse |
- |
- |
- |
3 mile/h |
2.0 Reverse |
- |
- |
- |
5.3 mile/h |
3.0 Reverse |
- |
- |
- |
9.1 mile/h |
Drawbar Pull - 3 Forward |
- |
- |
- |
46250 ft·lbf |
Drawbar Pull - 1 Forward |
- |
- |
- |
148200 ft·lbf |
Drawbar Pull - 2 Forward |
- |
- |
- |
82300 ft·lbf |
Service Refill Capacities |
Fuel Tank |
83.2 gal (US) |
90 gal (US) |
209.5 gal (US) |
- |
DEF Tank |
4.2 gal (US) |
7.4 gal (US) |
- |
- |
Cooling System |
- |
- |
31.7 gal (US) |
46.8 gal (US) |
Crankcase |
- |
- |
15.9 gal (US) |
- |
Diesel Exhaust Fluid Tank |
- |
- |
8.7 gal (US) |
- |
Transmission |
- |
- |
31.7 gal (US) |
- |
Hydraulic System Factory Fill |
- |
- |
63.4 gal (US) |
- |
Differential - Final Drives - Front |
- |
- |
49.1 gal (US) |
- |
Differential - Final Drives - Rear |
- |
- |
49.1 gal (US) |
- |
Hydraulic System - Tank Only |
- |
- |
37 gal (US) |
- |
Cooling System Refill - Tier 2 Equivalent Engine |
- |
- |
- |
41.7 gal (US) |
Engine Crankcase |
- |
- |
- |
35.1 gal (US) |
Power Train |
- |
- |
- |
120 gal (US) |
Power Train - Refill Volume |
- |
- |
- |
103.3 gal (US) |
Final Drive - Each |
- |
- |
- |
12.4 gal (US) |
Roller Frames - Each |
- |
- |
- |
24.8 gal (US) |
Hydraulic Tank |
- |
- |
- |
42.2 gal (US) |
Hydraulic System Tank and Chassis |
- |
- |
- |
64.7 gal (US) |
Hydraulic System Chassis + Blade and Ripper (Standard) |
- |
- |
- |
117.6 gal (US) |
Hydraulic System Chassis + Blade and Ripper (Carrydozer) |
- |
- |
- |
143.4 gal (US) |
VPAT |
Operating Weight |
37875 lb |
- |
- |
- |
Ground Pressure |
6.9 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
VPAT |
- |
- |
- |
Blade Capacity |
4.6 yd³ |
- |
- |
- |
LGP VPAT |
Operating Weight |
42263 lb |
- |
- |
- |
Ground Pressure |
4.7 psi |
- |
- |
- |
Width of Standard Shoe |
33 in |
- |
- |
- |
Blade |
LGP VPAT |
- |
- |
- |
Blade Capacity |
5.5 yd³ |
- |
- |
- |
Fine Grading VPAT |
Operating Weight |
39198 lb |
- |
- |
- |
Ground Pressure |
6 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
VPAT |
- |
- |
- |
Blade Capacity |
4.6 yd³ |
- |
- |
- |
Push Arm |
Operating Weight |
38228 lb |
- |
- |
- |
Ground Pressure |
7 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
Semi-Universal (SU) |
- |
- |
- |
Blade Capacity |
5.6 yd³ |
- |
- |
- |
Sustainability |
Recyclability |
97% |
98% |
- |
- |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
- |
Note (1) |
- |
- |
- |
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) |
|
Note (1) |
Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. |
- |
- |
- |
D6 XE Push Arm |
Operating Weight |
- |
49388 lb |
- |
- |
Ground Pressure |
- |
8 psi |
- |
- |
Width of Standard Shoe |
- |
24 in |
- |
- |
Blade |
- |
Semi-Universal (SU) |
- |
- |
Blade Capacity |
- |
7.5 yd³ |
- |
- |
D6 XE LGP (30-in) Push Arm |
Operating Weight |
- |
51020 lb |
- |
- |
Ground Pressure |
- |
6.6 psi |
- |
- |
Width of Standard Shoe |
- |
30 in |
- |
- |
Blade |
- |
Semi-Universal (SU) |
- |
- |
Blade Capacity |
- |
7.6 yd³ |
- |
- |
D6 XE LGP (36-in) Push Arm |
Operating Weight |
- |
53315 lb |
- |
- |
Ground Pressure |
- |
5.3 psi |
- |
- |
Width of Standard Shoe |
- |
36 in |
- |
- |
Blade |
- |
Straight |
- |
- |
Blade Capacity |
- |
5 yd³ |
- |
- |
D6 XE VPAT |
Operating Weight |
- |
49708 lb |
- |
- |
Ground Pressure |
- |
7.2 psi |
- |
- |
Width of Standard Shoe |
- |
24 in |
- |
- |
Blade |
- |
VPAT |
- |
- |
Blade Capacity |
- |
5.4 yd³ |
- |
- |
D6 XE LGP (30-in) VPAT |
Operating Weight |
- |
51333 lb |
- |
- |
Ground Pressure |
- |
5.9 psi |
- |
- |
Width of Standard Shoe |
- |
30 in |
- |
- |
Blade |
- |
VPAT |
- |
- |
Blade Capacity |
- |
5.9 yd³ |
- |
- |
D6 XE LGP (36-in) VPAT |
Operating Weight |
- |
52512 lb |
- |
- |
Ground Pressure |
- |
5.1 psi |
- |
- |
Width of Standard Shoe |
- |
36 in |
- |
- |
Blade |
- |
VPAT |
- |
- |
Blade Capacity |
- |
6.5 yd³ |
- |
- |
Operating Specifications |
Operating Weight |
- |
- |
105271 lb |
- |
Blade Capacities |
- |
- |
7.9 – 22.2 m3 (10.3 – 29.0 yd3) |
- |
Coal Scoop Operating Weight |
- |
- |
112428 lb |
- |
Chip Scoop Operating Weight |
- |
- |
112838 lb |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
- |
Pilot operated LS valve with EH |
- |
Lift/Tilt System |
- |
- |
Variable displacement piston |
- |
Maximum Flow at 1,900 rpm |
- |
- |
153 gal/min |
- |
Relief Valve Setting - Lift/Tilt |
- |
- |
4641 psi |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
- |
139.75 mm × 1021 mm (5.5 in × 40.2 in) |
- |
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke |
- |
- |
140 mm × 230 mm (5.5 in × 9.1 in) |
- |
Pilot System |
- |
- |
Variable displacement piston |
- |
Pilot Maximum Flow |
- |
- |
13.7 gal/min |
- |
Pilot Relief Valve Setting |
- |
- |
580 psi |
- |
Hydraulic System - Steering |
Steering System - Circuit |
- |
- |
Pilot, load sensing |
- |
Steering System - Pump |
- |
- |
Piston, variable displacement |
- |
Maximum Flow |
- |
- |
65.8 gal/min |
- |
Relief Valve Setting - Steering |
- |
- |
3495 psi |
- |
Total Steering Angle |
- |
- |
86 ° |
- |
Steering Cycle Times - High Idle |
- |
- |
3.1 s |
- |
Steering Cycle Times - Low Idle |
- |
- |
5.7 s |
- |
Axles |
Front |
- |
- |
Fixed |
- |
Rear |
- |
- |
Trunnion |
- |
Oscillation Angle |
- |
- |
±13° |
- |
Brakes |
Brakes |
- |
- |
ISO 3450: 2011 |
- |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
- |
- |
72 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
- |
113 dB(A) |
- |
Sound Performance - Tier 4 Final/EU Stage V - Suppression |
Operator Sound Level (ISO 6396) |
- |
- |
72 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
- |
109 dB(A) |
- |
Dimensions |
Height - Top of Exhaust Stack |
- |
- |
15.9 ft |
- |
Height - Top of Air Cleaner |
- |
- |
12.8 ft |
- |
Height - Top of Hood |
- |
- |
10.9 ft |
- |
Ground Clearance - Bumper |
- |
- |
3.1 ft |
- |
Centerline of Rear Axle to Edge of Bumper |
- |
- |
10.5 ft |
- |
Wheel Base |
- |
- |
14.9 ft |
- |
Length - Front of Tire |
- |
- |
28.4 ft |
- |
Length - Straight Blade on Ground |
- |
- |
32.6 ft |
- |
Centerline of Front Axle to Hitch |
- |
- |
7.5 ft |
- |
Length - Universal Blade on Ground |
- |
- |
34.4 ft |
- |
Ground Clearance |
- |
- |
1.7 ft |
- |
Height - Top of Cab |
- |
- |
13.7 ft |
- |
Scoops |
Chip Scoop Carry Capacity |
- |
- |
35 yd³ |
- |
Chip Scoop Doze Capacity |
- |
- |
70 yd³ |
- |
Coal Scoop Carry Capacity |
- |
- |
30 yd³ |
- |
Coal Scoop Doze Capacity |
- |
- |
60 yd³ |
- |
Engine - U.S. EPA Tier 4 Final/EU Stage V |
Engine Model |
- |
- |
- |
Cat® C32 |
Engine Power - Net SAE J1349/ISO 9249 - Forward |
- |
- |
- |
850 HP |
Displacement |
- |
- |
- |
1959 in³ |
Engine Power - Net SAE J1349/ISO 9249 - Reverse |
- |
- |
- |
955 HP |
Note (1) |
- |
- |
- |
*Excludes all fan losses. |
Note (2) |
- |
- |
- |
Engine ratings apply at 1,800 rpm. |
Note (3) |
- |
- |
- |
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
Blades |
Semi-Universal (SU)* Capacity |
- |
- |
- |
35.6 yd³ |
Semi-Universal (SU)* Width Over Endbits |
- |
- |
- |
219.8 in |
U-Blade Capacity |
- |
- |
- |
45 yd³ |
U-Blade Width |
- |
- |
- |
249.6 in |
Reclamation Universal - Blade capacity (SAE J1265) |
- |
- |
- |
55 yd³ |
Reclamation Universal - Width with blade (over end bits) |
- |
- |
- |
251.8 in |
Carry Dozer - Blade capacity (SAE J1265) |
- |
- |
- |
57 yd³ |
Carry Dozer - Width with blade (over end bits) |
- |
- |
- |
263.9 in |
Engine - U.S. EPA Tier 2 Equivalent |
Engine Model |
- |
- |
- |
Cat® C32 |
Displacement |
- |
- |
- |
1959 in³ |
Engine Power - Net SAE J1349/ISO 9249 - Forward |
- |
- |
- |
850 HP |
Engine Power - Net SAE J1349/ISO 9249 - Reverse |
- |
- |
- |
957 HP |
Note (1) |
- |
- |
- |
*Excludes all fan losses. |
Note (2) |
- |
- |
- |
Engine ratings apply at 1,800 rpm. |
Note (3) |
- |
- |
- |
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. |
Fuel Tank Capacities |
Fuel Tank - Total Volume |
- |
- |
- |
500 gal (US) |
Fuel Tank - Usable Volume |
- |
- |
- |
475 gal (US) |
Hydraulic Controls |
Pump Type |
- |
- |
- |
Variable displacement piston pump |
Combined Pump Output - Implement |
- |
- |
- |
177 gal/min |
Undercarriage |
Shoe Type |
- |
- |
- |
Extreme Service |
Width - Shoe |
- |
- |
- |
28 in |
Width - Shoe - CD |
- |
- |
- |
36 in |
Shoes/Side |
- |
- |
- |
41 |
Grouser Height |
- |
- |
- |
4 in |
Pitch |
- |
- |
- |
12.5 in |
Ground Clearance* |
- |
- |
- |
30.6 in |
Track Gauge |
- |
- |
- |
114 in |
Length - Track on Ground |
- |
- |
- |
175 in |
Ground Contact Area |
- |
- |
- |
9781 in² |
Ground Contact Area - CD |
- |
- |
- |
12605 in² |
Track Rollers/Side |
- |
- |
- |
8 |
Number of Carrier Rollers |
- |
- |
- |
1 per side (optional) |
Ripper - Single Shank |
Maximum penetration force * (shank vertical) |
- |
- |
- |
66000 lb |
Maximum penetration depth (standard tip) |
- |
- |
- |
63.5 in |
Pryout Force |
- |
- |
- |
148510 lb |
Ripper - Single Shank, Deep Ripping |
Maximum penetration force * (shank vertical) |
- |
- |
- |
66110 lb |
Maximum penetration depth (standard tip) |
- |
- |
- |
85.5 in |
Pryout Force |
- |
- |
- |
148510 lb |
Ripper - Multi-Shank, Adjustable Parallelogram |
Overall Beam Width |
- |
- |
- |
131.1 in |
Maximum Penetration Force - Shank Vertical |
- |
- |
- |
77350 lb |
Maximum Penetration - Standard Tip |
- |
- |
- |
43.3 in |
Pry-Out Force - Multi-Shank Ripper with One Tooth |
- |
- |
- |
145640 lb |
Dimensions - D11 Carrydozer |
Width at Outside of Track (710 mm Track Shoe) |
- |
- |
- |
149.8 in |
Length with SU-Blade** - No rear attachment |
- |
- |
- |
345.1 in |
Overall Length SU-Blade and SS Ripper** |
- |
- |
- |
421.7 in |
Standards |
ROPS |
- |
- |
- |
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 |
FOPS |
- |
- |
- |
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II |
Sound (1) |
- |
- |
- |
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). |
Sound (2) |
- |
- |
- |
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). |
Dimensions - D11 |
Ground Clearance* |
- |
- |
- |
31.4 in |
Track Gauge |
- |
- |
- |
114 in |
Width at Outside of Track (710 mm Track Shoe) |
- |
- |
- |
142 in |
Height (ROPS/canopy)* |
- |
- |
- |
185.9 in |
Length of Track on Ground |
- |
- |
- |
175 in |
Length with SU-Blade** - No rear attachment |
- |
- |
- |
337.8 in |
Overall Length SU-Blade and SS Ripper** |
- |
- |
- |
414.4 in |
Note |
- |
- |
- |
*Includes grouser height for total dimensions on hard surfaces. |