Compare

Compare Equipment Go Back


	SG36 Stump Grinder View Product	SG16 Stump Grinder View Product Remove
Required Hydraulics	High Flow XPS	Standard Flow	-
Cutting Wheel Diameter - With Teeth	21.5 in	21.5 in	-
Cutting Depth - Below Ground	20.5 in	20.5 in	-
Cutting Head Extension	11 in	11 in	-
Cutting Head Speed at Maximum Flow	1230 rpm	993 rpm	-
Cutting Head Swing Range	70 degrees	70 degrees	-
Cutting Height - Above Ground	18.5 in	18.5 in	-
Cutting Wheel Width - With Teeth	3.3 in	3.3 in	-
Cutting Width - Full Swing Range	60 in	60 in	-
Drive Method	Gerotor Motor- Direct	Gerotor Motor- Direct	-
Drive Shaft Torque at Maximum Pressure	345.9 lb/ft	217.6 lb/ft	-
Motor Displacement	6.1 in³	4.9 in³	-
Optimal Hydraulic Pressure	207-310 bar (3000-4500 psi)	145-235 bar (2100-3400 psi)	-
Overall Height	32 in	28.7 in	-
Overall Length	68.4 in	68.4 in	-
Overall Width	46.3 in	46.3 in	-
Optimal Hydraulic Flow	95-125 L/min (25-33 gpm)	42-86 L/min (11-23 gpm)	-
Weight	881.8 lb	835.6 lb	-
Number of Carbide Teeth per Cutting Wheel	32	32	-