Compare Equipment Go Back
 CN3586 Electric Motor for Gas Compression |
 C18 ACERT™ Tier 4 Final Engine |
 3516 Land Mechanical Drilling Engine |
 G3520 |
|
Electric Motor Specifications |
||||
|---|---|---|---|---|
| Type of EX-Protection | Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC) | - | - | - |
| Mounting Designation | F1 or F2 | - | - | - |
| Voltage/Frequency | 4000V & 4160V ± 10%/60 Hz | - | - | - |
| Full Load Speed | 894 rpm | - | - | - |
| Electric Motor Type | Squirrel Cage Induction Motor | - | - | - |
| Number of Poles | 8 | - | - | - |
| Maximum Ambient Temperature | 104 °F | - | - | - |
| Full Load Current | 458 Amps | - | - | - |
| Shaft | 8.5 in | - | - | - |
| Rated Torque | 20555 lb/ft | - | - | - |
| Maximum Altitude - Before Derate | 3300 ft | - | - | - |
| Locked Rotor Amps | 540% Code E | - | - | - |
| Connection of Stator Winding | Star | - | - | - |
| Standards | NEMA MG1 | - | - | - |
| Duty | Continuous | - | - | - |
| Enclosure Type/Method of Cooling | WP-II | - | - | - |
| Locked Rotor Torque | 60% | - | - | - |
| Service Factor | 1.15 SF (1.0 VFD) | - | - | - |
| No Load Current | 137 Amps | - | - | - |
| Insulation | Class F | - | - | - |
| Temperature Rise | Class B at rated load | - | - | - |
General Specifications |
||||
| Maximum Rating | - | 800 BHP | - | - |
| Displacement | - | 1104 in³ | - | - |
| Minimum Rating | - | 755 BHP | - | - |
| Governor and Protection | - | ADEM A4 | - | - |
| RPM | - | 1800 r/min | - | - |
| Aspiration | - | Turbocharged-Aftercooled | - | - |
| Flywheel and Flywheel Housing | - | SAE No. 0 or SAE No. 1 | - | - |
| Flywheel Teeth | - | 136 (SAE 0), 113 (SAE 1) | - | - |
| Rotation from Flywheel End | - | Counterclockwise | - | - |
| Stroke | - | 7.2 in | - | - |
| Bore | - | 5.7 in | - | - |
Emissions |
||||
| Emissions | - | EPA Tier 4 Final and EU Stage IV | - | - |
Dimensions |
||||
| Length | - | 60.2 in | 128 in | 336 in |
| Width | - | 37.8 in | 67 in | 94 in |
| Height | - | 50.5 in | 78.9 in | 128 in |
| Weight | - | 3482 lb | - | 48501 lb |
Capacity for Liquids |
||||
| Cooling System | - | 7.1 gal (US) | - | - |
| Minimum Cooling System - Engine Only | - | - | 61.5 gal (US) | - |
Engine Specifications |
||||
| Maximum Rating | - | - | 1649 BHP | - |
| Emissions | - | - | Non-certified | - |
| Displacement | - | - | 4210 in³ | 5956 in³ |
| Minimum Rating | - | - | 1649 BHP | - |
| Bore | - | - | 6.69 in | 6.7 in |
| Stroke | - | - | 7.48 in | 8.5 in |
| Rated Speed | - | - | 1200 r/min | - |
| Aspiration | - | - | Turbocharged-Aftercooled | Turbocharged |
| Governor and Protection | - | - | W3161 | - |
| Engine Weight - Net Dry | - | - | 19090 lb | - |
| Oil Change Interval | - | - | 500 | - |
| Rotation from Flywheel End | - | - | Counterclockwise | - |
| Flywheel and Flywheel Housing | - | - | SAE No. 00 | - |
| Flywheel Teeth | - | - | 183 | - |
| Emissions/Fuel Strategy | - | - | - | U.S. EPA Large S.I. Tier 2 / Non-Road Mobile Certified |
| Engine Control and Protection | - | - | - | Electronic (ADEM 4) |
| Generator Set Control | - | - | - | EMCP 4 Control Panels |
| Frequency - Speed | - | - | - | 60 Hz |
| Compression Ratio | - | - | - | 11.5:1 |
| Fuel System | - | - | - | Electronic Fuel Control Valve |
Add a Similar Product:
-
3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit Add
-
G3512 Add
-
C32 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
-
C27 ACERT Tier 4i Oilfield Diesel Generator Set Add
-
C27 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C15 ACERT Tier 4i Oilfield Diesel Generator Set Add
-
C18 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C15 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
3512C (HD) Land Mechanical Drilling Engine Add