Compare Equipment Go Back
 CN3086 Electric Motor for Gas Compression |
 C18 ACERT™ Tier 4 Final Engine |
 G3512 |
 C15 ACERT Tier 4i Oilfield Diesel Generator Set |
|
Electric Motor Specifications |
||||
|---|---|---|---|---|
| Voltage/Frequency | 4000V & 4160V ± 10%/60 Hz | - | - | - |
| Type of EX-Protection | Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC) | - | - | - |
| Mounting Designation | F1 or F2 | - | - | - |
| Number of Poles | 8 | - | - | - |
| Full Load Speed | 892 r/min | - | - | - |
| Electric Motor Type | Squirrel Cage Induction Motor | - | - | - |
| Enclosure Type/Method of Cooling | WP-II | - | - | - |
| Rated Torque | 17658 lb/ft | - | - | - |
| Maximum Altitude - Before Derate | 3300 ft | - | - | - |
| Maximum Ambient Temperature | 104 °F | - | - | - |
| Connection of Stator Winding | Star | - | - | - |
| Shaft | 8.5 in | - | - | - |
| Standards | NEMA MG1 | - | - | - |
| Insulation | Class F | - | - | - |
| Temperature Rise | Class B at rated load | - | - | - |
| Duty | Continuous | - | - | - |
| Locked Rotor Torque | 50% | - | - | - |
| Full Load Current | 390 Amps | - | - | - |
| Service Factor | 1.15 SF (1.0 VFD) | - | - | - |
| Locked Rotor Amps | 490% Code E | - | - | - |
| No Load Current | 108 Amps | - | - | - |
General Specifications |
||||
| Maximum Rating | - | 800 BHP | - | - |
| Displacement | - | 1104 in³ | - | - |
| Minimum Rating | - | 755 BHP | - | - |
| Governor and Protection | - | ADEM A4 | - | - |
| RPM | - | 1800 r/min | - | - |
| Aspiration | - | Turbocharged-Aftercooled | - | - |
| Flywheel and Flywheel Housing | - | SAE No. 0 or SAE No. 1 | - | - |
| Flywheel Teeth | - | 136 (SAE 0), 113 (SAE 1) | - | - |
| Rotation from Flywheel End | - | Counterclockwise | - | - |
| Stroke | - | 7.2 in | - | - |
| Bore | - | 5.7 in | - | - |
Emissions |
||||
| Emissions | - | EPA Tier 4 Final and EU Stage IV | - | - |
Dimensions |
||||
| Length | - | 60.2 in | 196 in | 138 in |
| Width | - | 37.8 in | 84.8 in | 60 in |
| Height | - | 50.5 in | 89.6 in | 83 in |
| Weight | - | 3482 lb | - | 10420 lb |
Capacity for Liquids |
||||
| Cooling System | - | 7.1 gal (US) | - | - |
| Fuel | - | - | - | Diesel |
Engine Specifications |
||||
| Emissions/Fuel Strategy | - | - | U.S. EPA Tier 2 S.I. Non Road Mobile | U.S. EPA Tier 4 interim |
| Aspiration | - | - | Turbocharged-2 stage after cooled | Turbocharged, aftercooled |
| Bore | - | - | 6.7 in | 5.4 in |
| Stroke | - | - | 7.5 in | 6.75 in |
| Displacement | - | - | 3173 in³ | 927 in³ |
| Engine Control and Protection | - | - | Electronic (ADEM 4) | ADEM A4 |
| Generator Set Control | - | - | EMCP 4.4 Control Panels | EMCP 4.2 |
| Frequency - Speed | - | - | 60 Hz | 60 Hz (1800 rpm) |
| Fuel System | - | - | Electronic Fuel Control Valve | MEUI |
| Maximum Rating | - | - | - | 450 ekW (562 kVA) |
| Minimum Rating | - | - | - | 450 ekW (562 kVA) |
| Manifold Type | - | - | - | Dry |
| Generator | - | - | - | SR4B |
Add a Similar Product:
-
3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit Add
-
G3520 Add
-
C32 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C27 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C27 ACERT Tier 4i Oilfield Diesel Generator Set Add
-
C18 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C15 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
-
3516 Land Mechanical Drilling Engine Add
-
3512C (HD) Land Mechanical Drilling Engine Add