Compare

Compare Equipment Go Back

Electric Motor Specifications
	CN1566 Electric Motor View Product	C18 ACERT™ Tier 4 Final Engine View Product Remove	3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit View Product Remove
Voltage/Frequency	4000V ± 10%/60 Hz	-	-
Type of EX-Protection	Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)	-	-
Mounting Designation	F1 or F2	-	-
Number of Poles	6 poles	-	-
Electric Motor Type	Squirrel Cage Induction Motor	-	-
Full Load Speed	1189 r/min	-	-
Shaft	5.1 in	-	-
Standards	NEMA MG1	-	-
Connection of Stator Winding	Star	-	-
Locked Rotor Torque	60%	-	-
No Load Current	67 Amps	-	-
Locked Rotor Amps	500% Code E	-	-
Service Factor	1.15 SF (1.0 VFD)	-	-
Enclosure Type/Method of Cooling	WP-II	-	-
Duty	Continuous	-	-
Temperature Rise	Class B at rated load	-	-
Maximum Ambient Temperature	104 °F	-	-
Maximum Altitude - Before Derate	3000 ft	-	-
Rated Torque	6625 lb/ft	-	-
Full Load Current	202 Amps	-	-
Insulation	Class F	-	-
General Specifications
Maximum Rating	-	800 BHP	2500 BHP
Displacement	-	1104 in³	3574 in³
Minimum Rating	-	755 BHP	2150 BHP
Governor and Protection	-	ADEM A4	-
RPM	-	1800 r/min	-
Aspiration	-	Turbocharged-Aftercooled	Turbocharged-Aftercooled
Flywheel and Flywheel Housing	-	SAE No. 0 or SAE No. 1	SAE No. 0
Flywheel Teeth	-	136 (SAE 0), 113 (SAE 1)	151
Rotation from Flywheel End	-	Counterclockwise	-
Stroke	-	7.2 in	8.5 in
Bore	-	5.7 in	6.7 in
Emissions
Emissions	-	EPA Tier 4 Final and EU Stage IV	Non-current EPA Tier 2
Dimensions
Length	-	60.2 in	110.4 in
Width	-	37.8 in	59.2 in
Height	-	50.5 in	86.3 in
Weight	-	3482 lb	14650 lb
Capacity for Liquids
Cooling System	-	7.1 gal (US)	-