Compare Equipment Go Back
 CN1566 Electric Motor |
 C15 ACERT Tier 4i Oilfield Diesel Generator Set |
 3512C (HD) Land Mechanical Drilling Engine |
|
Electric Motor Specifications |
|||
|---|---|---|---|
| Voltage/Frequency | 4000V ± 10%/60 Hz | - | - |
| Type of EX-Protection | Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC) | - | - |
| Mounting Designation | F1 or F2 | - | - |
| Number of Poles | 6 poles | - | - |
| Electric Motor Type | Squirrel Cage Induction Motor | - | - |
| Full Load Speed | 1189 r/min | - | - |
| Shaft | 5.1 in | - | - |
| Standards | NEMA MG1 | - | - |
| Connection of Stator Winding | Star | - | - |
| Locked Rotor Torque | 60% | - | - |
| No Load Current | 67 Amps | - | - |
| Locked Rotor Amps | 500% Code E | - | - |
| Service Factor | 1.15 SF (1.0 VFD) | - | - |
| Enclosure Type/Method of Cooling | WP-II | - | - |
| Duty | Continuous | - | - |
| Temperature Rise | Class B at rated load | - | - |
| Maximum Ambient Temperature | 104 °F | - | - |
| Maximum Altitude - Before Derate | 3000 ft | - | - |
| Rated Torque | 6625 lb/ft | - | - |
| Full Load Current | 202 Amps | - | - |
| Insulation | Class F | - | - |
Engine Specifications |
|||
| Maximum Rating | - | 450 ekW (562 kVA) | 1475 BHP |
| Minimum Rating | - | 450 ekW (562 kVA) | 1250 BHP |
| Emissions/Fuel Strategy | - | U.S. EPA Tier 4 interim | - |
| Aspiration | - | Turbocharged, aftercooled | Turbocharged-Aftercooled |
| Manifold Type | - | Dry | - |
| Bore | - | 5.4 in | 6.69 in |
| Stroke | - | 6.75 in | 8.46 in |
| Displacement | - | 927 in³ | 3574 in³ |
| Engine Control and Protection | - | ADEM A4 | - |
| Generator Set Control | - | EMCP 4.2 | - |
| Generator | - | SR4B | - |
| Fuel System | - | MEUI | - |
| Frequency - Speed | - | 60 Hz (1800 rpm) | - |
| Emissions | - | - | U.S. EPA Non-road Tier 2 |
| Rated Speed | - | - | 1200 r/min |
| Governor and Protection | - | - | ADEM A3 |
| Engine Weight - Net Dry | - | - | 11945 lb |
| Rotation from Flywheel End | - | - | Counterclockwise |
| Oil Change Interval | - | - | 500 |
| Flywheel and Flywheel Housing | - | - | SAE No. 00 |
| Flywheel Teeth | - | - | 183 |
Capacity for Liquids |
|||
| Fuel | - | Diesel | - |
| Minimum Cooling System - Engine Only | - | - | 41 gal (US) |
Dimensions |
|||
| Length | - | 138 in | 105.6 in |
| Width | - | 60 in | 70.5 in |
| Height | - | 83 in | 79.5 in |
| Weight | - | 10420 lb | - |
Add a Similar Product:
-
G3512 Add
-
3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit Add
-
C18 ACERT™ Tier 4 Final Engine Add
-
G3520 Add
-
C32 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C27 ACERT Tier 4i Oilfield Diesel Generator Set Add
-
C27 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C15 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C18 ACERT Tier 2 Oilfield Diesel Generator Set Add
-