Compare Equipment Go Back
 CN1566 Electric Motor |
 3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit |
 3516 Land Mechanical Drilling Engine |
|
Electric Motor Specifications |
|||
|---|---|---|---|
| Voltage/Frequency | 4000V ± 10%/60 Hz | - | - |
| Type of EX-Protection | Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC) | - | - |
| Mounting Designation | F1 or F2 | - | - |
| Number of Poles | 6 poles | - | - |
| Electric Motor Type | Squirrel Cage Induction Motor | - | - |
| Full Load Speed | 1189 r/min | - | - |
| Shaft | 5.1 in | - | - |
| Standards | NEMA MG1 | - | - |
| Connection of Stator Winding | Star | - | - |
| Locked Rotor Torque | 60% | - | - |
| No Load Current | 67 Amps | - | - |
| Locked Rotor Amps | 500% Code E | - | - |
| Service Factor | 1.15 SF (1.0 VFD) | - | - |
| Enclosure Type/Method of Cooling | WP-II | - | - |
| Duty | Continuous | - | - |
| Temperature Rise | Class B at rated load | - | - |
| Maximum Ambient Temperature | 104 °F | - | - |
| Maximum Altitude - Before Derate | 3000 ft | - | - |
| Rated Torque | 6625 lb/ft | - | - |
| Full Load Current | 202 Amps | - | - |
| Insulation | Class F | - | - |
General Specifications |
|||
| Maximum Rating | - | 2500 BHP | - |
| Displacement | - | 3574 in³ | - |
| Minimum Rating | - | 2150 BHP | - |
| Aspiration | - | Turbocharged-Aftercooled | - |
| Flywheel and Flywheel Housing | - | SAE No. 0 | - |
| Flywheel Teeth | - | 151 | - |
| Stroke | - | 8.5 in | - |
| Bore | - | 6.7 in | - |
Emissions |
|||
| Emissions | - | Non-current EPA Tier 2 | - |
Dimensions |
|||
| Length | - | 110.4 in | 128 in |
| Width | - | 59.2 in | 67 in |
| Height | - | 86.3 in | 78.9 in |
| Weight | - | 14650 lb | - |
Engine Specifications |
|||
| Maximum Rating | - | - | 1649 BHP |
| Emissions | - | - | Non-certified |
| Displacement | - | - | 4210 in³ |
| Minimum Rating | - | - | 1649 BHP |
| Bore | - | - | 6.69 in |
| Stroke | - | - | 7.48 in |
| Rated Speed | - | - | 1200 r/min |
| Aspiration | - | - | Turbocharged-Aftercooled |
| Governor and Protection | - | - | W3161 |
| Engine Weight - Net Dry | - | - | 19090 lb |
| Oil Change Interval | - | - | 500 |
| Rotation from Flywheel End | - | - | Counterclockwise |
| Flywheel and Flywheel Housing | - | - | SAE No. 00 |
| Flywheel Teeth | - | - | 183 |
Capacity for Liquids |
|||
| Minimum Cooling System - Engine Only | - | - | 61.5 gal (US) |
Add a Similar Product:
-
G3512 Add
-
C18 ACERT™ Tier 4 Final Engine Add
-
C32 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
G3520 Add
-
C27 ACERT Tier 4i Oilfield Diesel Generator Set Add
-
C27 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C18 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C15 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C15 ACERT Tier 4i Oilfield Diesel Generator Set Add
-