Compare Equipment Go Back
 CN1566 Electric Motor |
 3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit |
 C18 ACERT™ Tier 4 Final Engine |
 G3520 |
 G3512 |
|
Electric Motor Specifications |
|||||
|---|---|---|---|---|---|
| Voltage/Frequency | 4000V ± 10%/60 Hz | - | - | - | - |
| Type of EX-Protection | Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC) | - | - | - | - |
| Mounting Designation | F1 or F2 | - | - | - | - |
| Number of Poles | 6 poles | - | - | - | - |
| Electric Motor Type | Squirrel Cage Induction Motor | - | - | - | - |
| Full Load Speed | 1189 r/min | - | - | - | - |
| Shaft | 5.1 in | - | - | - | - |
| Standards | NEMA MG1 | - | - | - | - |
| Connection of Stator Winding | Star | - | - | - | - |
| Locked Rotor Torque | 60% | - | - | - | - |
| No Load Current | 67 Amps | - | - | - | - |
| Locked Rotor Amps | 500% Code E | - | - | - | - |
| Service Factor | 1.15 SF (1.0 VFD) | - | - | - | - |
| Enclosure Type/Method of Cooling | WP-II | - | - | - | - |
| Duty | Continuous | - | - | - | - |
| Temperature Rise | Class B at rated load | - | - | - | - |
| Maximum Ambient Temperature | 104 °F | - | - | - | - |
| Maximum Altitude - Before Derate | 3000 ft | - | - | - | - |
| Rated Torque | 6625 lb/ft | - | - | - | - |
| Full Load Current | 202 Amps | - | - | - | - |
| Insulation | Class F | - | - | - | - |
General Specifications |
|||||
| Maximum Rating | - | 2500 BHP | 800 BHP | - | - |
| Displacement | - | 3574 in³ | 1104 in³ | - | - |
| Minimum Rating | - | 2150 BHP | 755 BHP | - | - |
| Aspiration | - | Turbocharged-Aftercooled | Turbocharged-Aftercooled | - | - |
| Flywheel and Flywheel Housing | - | SAE No. 0 | SAE No. 0 or SAE No. 1 | - | - |
| Flywheel Teeth | - | 151 | 136 (SAE 0), 113 (SAE 1) | - | - |
| Stroke | - | 8.5 in | 7.2 in | - | - |
| Bore | - | 6.7 in | 5.7 in | - | - |
| Governor and Protection | - | - | ADEM A4 | - | - |
| RPM | - | - | 1800 r/min | - | - |
| Rotation from Flywheel End | - | - | Counterclockwise | - | - |
Emissions |
|||||
| Emissions | - | Non-current EPA Tier 2 | EPA Tier 4 Final and EU Stage IV | - | - |
Dimensions |
|||||
| Length | - | 110.4 in | 60.2 in | 336 in | 196 in |
| Width | - | 59.2 in | 37.8 in | 94 in | 84.8 in |
| Height | - | 86.3 in | 50.5 in | 128 in | 89.6 in |
| Weight | - | 14650 lb | 3482 lb | 48501 lb | - |
Capacity for Liquids |
|||||
| Cooling System | - | - | 7.1 gal (US) | - | - |
Engine Specifications |
|||||
| Emissions/Fuel Strategy | - | - | - | U.S. EPA Large S.I. Tier 2 / Non-Road Mobile Certified | U.S. EPA Tier 2 S.I. Non Road Mobile |
| Aspiration | - | - | - | Turbocharged | Turbocharged-2 stage after cooled |
| Bore | - | - | - | 6.7 in | 6.7 in |
| Stroke | - | - | - | 8.5 in | 7.5 in |
| Displacement | - | - | - | 5956 in³ | 3173 in³ |
| Engine Control and Protection | - | - | - | Electronic (ADEM 4) | Electronic (ADEM 4) |
| Generator Set Control | - | - | - | EMCP 4 Control Panels | EMCP 4.4 Control Panels |
| Frequency - Speed | - | - | - | 60 Hz | 60 Hz |
| Compression Ratio | - | - | - | 11.5:1 | - |
| Fuel System | - | - | - | Electronic Fuel Control Valve | Electronic Fuel Control Valve |
Add a Similar Product:
-
-
C32 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C27 ACERT Tier 4i Oilfield Diesel Generator Set Add
-
C27 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C18 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
C15 ACERT Tier 4i Oilfield Diesel Generator Set Add
-
C15 ACERT Tier 2 Oilfield Diesel Generator Set Add
-
3516 Land Mechanical Drilling Engine Add
-
3512C (HD) Land Mechanical Drilling Engine Add
-
3512 Land Mechanical Drilling Engine Add