Compare Equipment Go Back
 MX150 Microprocessor Controller |
 CTS Series Automatic Transfer Switch |
|
|
Technical Summary |
|||
|---|---|---|---|
| Rating Range | Switch Dependent | 40 to 4000A | - |
| Transfer Type | Application Dependent | Open transition | - |
| Switch Type | Application Dependent | Contactor Based | - |
Controller Specifications |
|||
| Undervoltage Dropout for Source 1 and Source 2 | 75-98% of nominal | - | - |
| Undervoltage Restore for Source 1 and Source 2 | 85-100% of nominal | - | - |
| Underfrequency Dropout for Source 1 and Source 2 | 88-98% of nominal | - | - |
| Underfrequency Restore for Source 1 and Source 2 | 90-100% of nominal | - | - |
| Delay for Engine Cool Down (U) | 0-10 seconds | - | - |
| Delay Transfer to Nonpreferred Source (W) | 0-5 minutes | - | - |
| Delay NeutralTransition Time Delays (DT,DW) | 0-10 minutes | - | - |
| Storage Temperature | (-30˚C - 75˚C ), -22˚F - 167˚F | - | - |
| Operating Temperature Ambient | 40 - 400 amp molded shell (-20˚C to 65˚C) , -4˚F to 149˚F 40 - 4000 amp all others (-20˚C to 60˚C), -4˚F to 149˚F |
- | - |
Electrical Ratings |
|||
| Control Power | - | 40 to 4000 amperes, 2, 3 or 4 Poles | - |
| Enclosure Capability | - | NEMA 1, 3R, 4, 4X and 12 | - |
| System Voltage Application | - | Available to 600 VAC, 50 or 60 Hz | - |
| Applicable Testing | - | UL 1008 listed at 480 VAC CSA C22.2 No. 178 certified at 600 VAC IEC 947-6-1 listed through 480 VAC |
- |
Add a Similar Product:
-
MX250 Microprocessor Controller Add
-
MX350 Controller Add
-
CTSM and CTGM Series Manual Transfer Switches Add
-
CTX Series Automatic Transfer Switch Add
-
-
CTE Series Automatic Transfer Switch Add
-