Compare Equipment Go Back

EMCP 4.4 Master Control Panel
CTS Series Automatic Transfer Switch

Technical Summary

Configuration Remote monitoring and control for up to 8 generator sets via high-speed network. Enables paralleling a group of EMCP 4.4 equipped generator sets to a single utility source. - -
Modes of Operation Emergency standby, island, utility paralleling - -
Application LV and MV (208V - 38 kV) - -
Rating Range - 40 to 4000A -
Transfer Type - Open transition -
Switch Type - Contactor Based -

Generator Protective Devices

ANSI Protective Devices 15/25, 27/59, 81 O/U, 32, 40, 50, 51 - -

Utility Protective Devices

ANSI Protective Devices 15/25. 27/59, 81 O/U, 32,47 (Industrial Grade) - -

Environmental Parameters

Certifications IBC, CBC, UBC & OSHPD Certified - -
Control Panel Enclosure NEMA 1 wall-mounted construction - -
Operating Temperature 0°C to 50°C - -
Storage Temperature -20°C to +60°C - -
Low Voltage Standards NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 - -
Medium Voltage Standards NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 - -

Electrical Ratings

Control Power - 40 to 4000 amperes, 2, 3 or 4 Poles -
Enclosure Capability - NEMA 1, 3R, 4, 4X and 12 -
System Voltage Application - Available to 600 VAC, 50 or 60 Hz -
Applicable Testing - UL 1008 listed at 480 VAC
CSA C22.2 No. 178 certified at 600 VAC
IEC 947-6-1 listed through 480 VAC
-
Add a Similar Product:
  • MX250 Microprocessor Controller Add
  • MX350 Controller Add
  • CTSM and CTGM Series Manual Transfer Switches Add
  • CTX Series Automatic Transfer Switch Add
  • MX150 Microprocessor Controller Add
  • CTGSE & CTGDSE Series Service Rated Entrance Rated Automatic Transfer Switch Add
  • CTE Series Automatic Transfer Switch Add
  • CTG Series Automatic Transfer Switch Add
  • Cat XLM Switchgear Add
  • Cat Customizable Switchgear and Controls Add