Compare Equipment Go Back
 EMCP 4.4 Master Control Panel |
 CTE Series Automatic Transfer Switch |
|
|
Technical Summary |
|||
|---|---|---|---|
| Configuration | Remote monitoring and control for up to 8 generator sets via high-speed network. Enables paralleling a group of EMCP 4.4 equipped generator sets to a single utility source. | - | - |
| Modes of Operation | Emergency standby, island, utility paralleling | - | - |
| Application | LV and MV (208V - 38 kV) | - | - |
| Rating Range | - | 40-4000A | - |
| Transfer Type | - | Open / Closed / 4 position switch | - |
| Switch Type | - | Contactor Based | - |
Generator Protective Devices |
|||
| ANSI Protective Devices | 15/25, 27/59, 81 O/U, 32, 40, 50, 51 | - | - |
Utility Protective Devices |
|||
| ANSI Protective Devices | 15/25. 27/59, 81 O/U, 32,47 (Industrial Grade) | - | - |
Environmental Parameters |
|||
| Certifications | IBC, CBC, UBC & OSHPD Certified | - | - |
| Control Panel Enclosure | NEMA 1 wall-mounted construction | - | - |
| Operating Temperature | 0°C to 50°C | - | - |
| Storage Temperature | -20°C to +60°C | - | - |
| Low Voltage Standards | NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 | - | - |
| Medium Voltage Standards | NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 | - | - |
Electrical Ratings |
|||
| Control Power | - | 40 to 4000 amperes, 2,3 or 4 poles | - |
| Enclosure Capability | - | NEMA 1, 3R, 4, 4X and 12 | - |
| System Voltage Application | - | Available to 600 VAC, 50 or 60 Hz | - |
| Applicable Testing | - | - | |
Add a Similar Product:
-
MX250 Microprocessor Controller Add
-
MX350 Controller Add
-
CTSM and CTGM Series Manual Transfer Switches Add
-
CTX Series Automatic Transfer Switch Add
-
MX150 Microprocessor Controller Add
-
-
CTS Series Automatic Transfer Switch Add
-
-
Cat XLM Switchgear Add
-
Cat Customizable Switchgear and Controls Add