Compare

Compare Equipment Go Back

Generator Set Specifications
	Cat G3520H Combined Heat and Power (CHP) Solution View Product	EMCP 4.4 Master Control Panel View Product Remove
Continuous Rating	2480 ekW @ 1.0pf	-	-
Fuel Type	Natural Gas	-	-
Maximum Electrical Efficiency	42.40%	-	-
Frequency	60 Hz	-	-
RPM	1500	-	-
Engine Specifications
Engine Model	G3520H	-	-
Displacement	5956 in³	-	-
Aspiration	TA	-	-
Bore	6.7 in	-	-
Stroke	8.5 in	-	-
Fuel System	Electronic Fuel Control Valve	-	-
Governor Type	ADEM™ A4	-	-
Compression Ratio	11.1	-	-
Generator Set Dimensions
Length	302 in	-	-
Width	86 in	-	-
Height	97 in	-	-
Dry Weight - Genset	54675 lb	-	-
Weight	168000 lb	-	-
Technical Summary
Configuration	-	Remote monitoring and control for up to 8 generator sets via high-speed network. Enables paralleling a group of EMCP 4.4 equipped generator sets to a single utility source.	-
Modes of Operation	-	Emergency standby, island, utility paralleling	-
Application	-	LV and MV (208V - 38 kV)	-
Generator Protective Devices
ANSI Protective Devices	-	15/25, 27/59, 81 O/U, 32, 40, 50, 51	-
Utility Protective Devices
ANSI Protective Devices	-	15/25. 27/59, 81 O/U, 32,47 (Industrial Grade)	-
Environmental Parameters
Certifications	-	IBC, CBC, UBC & OSHPD Certified	-
Control Panel Enclosure	-	NEMA 1 wall-mounted construction	-
Operating Temperature	-	0°C to 50°C	-
Storage Temperature	-	-20°C to +60°C	-
Low Voltage Standards	-	NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70	-
Medium Voltage Standards	-	NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110	-