Compare Equipment Go Back
 DG275-2 (3 phase) |
 Cat Customizable Switchgear and Controls |
 C4.4 Generator Set |
 Cat® BDP1000 Bi-Directional Power Inverter |
|
Generator Set Specifications |
||||
|---|---|---|---|---|
| Frequency | 60 Hz | - | 50 Hz | - |
| Natural Gas Rating | 275 eKW | - | - | - |
| Emissions/Fuel Strategy | U.S. EPA Certified for Non-Emergency Application | - | EU Stage II & R96/EUIIIa | - |
| Displacement | 864.71 in³ | - | - | - |
| Speed | 1800 rpm | - | 1500 rpm | - |
| Maximum Rating | - | - | 110 kVA | - |
| Minimum Rating | - | - | 50 kVA | - |
| Voltage | - | - | 110 to 480 Volts | - |
| Duty Cycle | - | - | Standby, Prime | - |
Engine Specifications |
||||
| Fuel System | Carburetor, Down Draft | - | Direct Injection or Common Rail | - |
| Compression Ratio | 9.5:1 | - | 16.2:1, 17.25:1, 18.2:1 or 18.3:1 | - |
| Bore | 5.31 in | - | 4.1 in | - |
| Stroke | 6.5 in | - | 5 in | - |
| Engine Model | - | - | Cat® C4.4 | - |
| Displacement | - | - | 268.5 in³ | - |
| Aspiration | - | - | Turbocharged | - |
| Governor Type | - | - | Mechanical | - |
Generator Set Dimensions |
||||
| Length | 136 in | - | - | - |
| Width | 57.6 in | - | - | - |
| Height | 66.1 in | - | - | - |
| Weight | 6274 lb | - | - | - |
| Length - Maximum | - | - | 75.8 in | - |
| Width - Maximum | - | - | 44.1 in | - |
| Height - Maximum | - | - | 53.6 in | - |
Technical Summary |
||||
| Configuration | - | Application-specific switchgear with control logic designed to meet any customer's sequence of operations. Examples are 3+ Utilities, CHP applications, complex load shed schemes, etc | - | - |
| Modes of Operation | - | All modes of paralleling generator sets to each other and to other sources (utility, alternative fuels, wind, etc) can be supported. Caterpillar generation and control experts can design and program the most complex power schemes to meet your critical pow | - | - |
| Application | - | LV and MV ( 208V - 38 kV) 50 / 60 Hz | - | Energy Storage System |
| Module Type | - | - | - | Integral part of Power Grid Stabilization and Energy Time Shift modules |
| Rated Power | - | - | - | 1000 kVA (1000kW 1PF) |
Generator Protective Devices |
||||
| ANSI Protective Devices | - | Per customer specification | - | - |
Utility Protective Devices |
||||
| ANSI Protective Devices | - | Per customer specification | - | - |
Environmental Parameters |
||||
| Certifications | - | Per customer specification | - | - |
| Control Panel Enclosure | - | Per customer specification | - | - |
| Operating Temperature | - | Per customer specification | - | - |
| Storage Temperature | - | Per customer specification | - | - |
| Low Voltage Standards | - | Per customer specification | - | - |
| Medium Voltage Standards | - | Per customer specification | - | - |
Add a Similar Product:
-
Cat Switchgear Add
-
Cat XLM Switchgear Add
-
Cat EGP Switchgear Add
-
Engine Paralleling and Integration Control (EPIC) Add
-
EMCP 4.4 Master Control Panel Add
-
Energy Capacity Expansion (ECE) module Add
-
Energy Time Shift (ETS) Module Add
-
XQ570 Tier 4 Final – 455 ekW (568 kVA) Add
-
Temporary Connection Boxes Add
-
XQP550 EU Stage V Add