Compare Equipment Go Back
 A68 Auger |
 A11 Auger |
|
|
| Drive Shaft Torque at Maximum Pressure | 5034.6 lb/ft | 815 lb/ft | - |
|---|---|---|---|
| Drive Method | Gerotor Motor - Double Planetary Reduction | Gerotor Motor - Direct Drive | - |
| Mounting Bracket Design | 5 Ton Mini Excavator Pin On | 2 Ton Mini Excavator Pin On | - |
| Required Hydraulics | High Flow XPS | Standard Flow | - |
| Optimal Hydraulic Flow | 95-130 L/min (25-34 gpm) | 75-90 L/min (20-24 gpm) | - |
| Optimal Hydraulic Pressure | 207-290 bar (3002-4206 psi) | 105-150 bar (1523-2176 psi) | - |
| Overall Width - With Bracket | 11.4 in | 11 in | - |
| Overall Length - With Bracket | 14.2 in | 11 in | - |
| Overall Height | 36.1 in | 35.4 in | - |
| Housing Diameter | 11 in | 11 in | - |
| Swing Range (fore/aft) | 60 degrees | 36 degrees | - |
| Swing Range (L/R) | 76 degrees | 76 degrees | - |
| Weight | 233.7 lb | 178.6 lb | - |
| Motor Displacement | 2.67 in³ | 24 in³ | - |
| Bit Speed at Maximum Flow | 81 rpm | 191 rpm | - |
| Hex Output Shaft Size | 2 in | 2 in | - |
