Compare Equipment Go Back
 A41 Auger |
 A68 Auger |
|
|
| Drive Shaft Torque at Maximum Pressure | 3038.8 lb/ft | 5034.6 lb/ft | - |
|---|---|---|---|
| Drive Method | Gerotor Motor - Single Planetary Reduction | Gerotor Motor - Double Planetary Reduction | - |
| Mounting Bracket Design | 3 Ton Mini Excavator Pin On | 5 Ton Mini Excavator Pin On | - |
| Required Hydraulics | Standard Flow | High Flow XPS | - |
| Optimal Hydraulic Flow | 42-83 L/min (11-22 gpm) | 95-130 L/min (25-34 gpm) | - |
| Optimal Hydraulic Pressure | 145-235 bar (2100-3400 psi) | 207-290 bar (3002-4206 psi) | - |
| Overall Width - With Bracket | 11.8 in | 11.4 in | - |
| Overall Length - With Bracket | 11.1 in | 14.2 in | - |
| Overall Height | 34.4 in | 36.1 in | - |
| Housing Diameter | 11 in | 11 in | - |
| Swing Range (fore/aft) | 72 degrees | 60 degrees | - |
| Swing Range (L/R) | 76 degrees | 76 degrees | - |
| Weight | 202.8 lb | 233.7 lb | - |
| Motor Displacement | 15.26 in³ | 2.67 in³ | - |
| Bit Speed at Maximum Flow | 71 rpm | 81 rpm | - |
| Hex Output Shaft Size | 2 in | 2 in | - |
