Compare Equipment Go Back
 A23 Auger |
 A11 Auger |
|
|
| Drive Shaft Torque at Maximum Pressure | 1699.3 lb/ft | 815 lb/ft | - |
|---|---|---|---|
| Drive Method | Gerotor Motor - Direct Drive | Gerotor Motor - Direct Drive | - |
| Mounting Bracket Design | 2 Ton Mini Excavator Pin On | 1 Ton Mini Excavator Pin On | - |
| Required Hydraulics | Standard Flow | Standard Flow | - |
| Optimal Hydraulic Flow | 42-83 L/min (11-22 gpm) | 75-90 L/min (20-24 gpm) | - |
| Optimal Hydraulic Pressure | 145-235 bar (2100-3400 psi) | 105-150 bar (1523-2176 psi) | - |
| Overall Width - With Bracket | 11.1 in | 11 in | - |
| Overall Length - With Bracket | 11.1 in | 11 in | - |
| Overall Height | 37.3 in | 35.4 in | - |
| Housing Diameter | 11 in | 11 in | - |
| Swing Range (fore/aft) | 70 degrees | 36 degrees | - |
| Swing Range (L/R) | 76 degrees | 76 degrees | - |
| Weight | 257.9 lb | 174.2 lb | - |
| Motor Displacement | 38 in³ | 24 in³ | - |
| Bit Speed at Maximum Flow | 127 rpm | 191 rpm | - |
| Hex Output Shaft Size | 2 in | 2 in | - |
