Compare

Compare Equipment Go Back


	A11 Auger For 2 Ton Mini Excavators View Product	A68 Auger For 5 Ton Mini Excavators View Product Remove	A41 Auger For Skid Steer Couplers View Product Remove
Drive Shaft Torque at Maximum Pressure	815 lb/ft	5034.6 lb/ft	3037.3 lb/ft
Drive Method	Gerotor Motor - Direct Drive	Gerotor Motor - Double Planetary Reduction	Gerotor Motor - Single Planetary Reduction
Mounting Bracket Design	2 Ton Mini Excavator Pin On	8 Ton Mini Excavator Pin On	Skid Steer Loader Coupler
Required Hydraulics	Standard Flow	High Flow XPS	Standard Flow
Optimal Hydraulic Flow	75-90 L/min (20-24 gpm)	95-130 L/min (25-34 gpm)	42-83 L/min (11-22 gpm)
Optimal Hydraulic Pressure	105-150 bar (1523-2176 psi)	207-290 bar (3002-4206 psi)	145-235 bar (2100-3400 psi)
Overall Width - With Bracket	11 in	13.9 in	45.4 in
Overall Length - With Bracket	11 in	17.5 in	23.5 in
Overall Height	35.4 in	36.1 in	36.8 in
Housing Diameter	11 in	11 in	9.9 in
Swing Range (fore/aft)	36 degrees	60 degrees	120 degrees
Swing Range (L/R)	76 degrees	76 degrees	102 degrees
Weight	178.6 lb	324.1 lb	366 lb
Motor Displacement	24 in³	2.67 in³	15 in³
Bit Speed at Maximum Flow	191 rpm	81 rpm	71 rpm
Hex Output Shaft Size	2 in	2 in	2 in
Swing Range	-	-	102 degrees