Compare

Compare Equipment Go Back


	A11 Auger For 2 Ton Mini Excavators View Product	A23 Auger For Skid Steer Couplers View Product Remove	A41 Auger For 3 Ton Mini Excavators View Product Remove
Drive Shaft Torque at Maximum Pressure	815 lb/ft	1699.3 lb/ft	3038.8 lb/ft
Drive Method	Gerotor Motor - Direct Drive	Gerotor Motor - Direct Drive	Gerotor Motor - Single Planetary Reduction
Mounting Bracket Design	2 Ton Mini Excavator Pin On	Skid Steer Loader Coupler	3 Ton Mini Excavator Pin On
Required Hydraulics	Standard Flow	Standard Flow	Standard Flow
Optimal Hydraulic Flow	75-90 L/min (20-24 gpm)	42-83 L/min (11-22 gpm)	42-83 L/min (11-22 gpm)
Optimal Hydraulic Pressure	105-150 bar (1523-2176 psi)	145-235 bar (2100-3400 psi)	145-235 bar (2100-3400 psi)
Overall Width - With Bracket	11 in	45 in	11.8 in
Overall Length - With Bracket	11 in	23.5 in	11.1 in
Overall Height	35.4 in	40.2 in	34.4 in
Housing Diameter	11 in	9.9 in	11 in
Swing Range (fore/aft)	36 degrees	120 degrees	72 degrees
Swing Range (L/R)	76 degrees	102 degrees	76 degrees
Weight	178.6 lb	423.3 lb	202.8 lb
Motor Displacement	24 in³	38 in³	15.26 in³
Bit Speed at Maximum Flow	191 rpm	127 rpm	71 rpm
Hex Output Shaft Size	2 in	2 in	2 in
Swing Range	-	102 degrees	-