Compare Equipment Go Back
 730 EJ Articulated Truck |
 725 Articulated Truck |
|
|
Engine |
|||
|---|---|---|---|
| Engine Model | Cat® C13B | Cat® C9.3 | - |
| Gross Power (SAE J1995) | 361 hp | 342 hp | - |
| Net Power (SAE J1349) | 351 hp | 334 hp | - |
| Engine Power (ISO 14396) | 370 hp | 338 hp | - |
| Bore | 5.1 in | 4.5 in | - |
| Stroke | 6.2 in | 45.2 in | - |
| Displacement | 763 in³ | 567.5 in³ | - |
| Note (1) | Advertised power is tested per the specified standard in effect at the time of manufacture. | Advertised power is tested at 1,700 rpm. | - |
| Note (2) | Advertised power is tested at 1,800 rpm. | Advertised power is tested per the specified standard in effect at the time of manufacture. | - |
| Note (3) | Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed. | - |
| Note (4) | Net power when the fan is at maximum speed is 262 kW (351 hp) per the SAE reference conditions. | Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions. | - |
| Note (5) | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, and Korea Stage V emission standards. | Meets U.S. EPA Tier 4 Final/EU Stage V, Japan 2014, and Korea Stage V emission standards. | - |
| Note (6) | Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1:2006. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. | Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. | - |
| No Engine De-rating Below | 12500 ft | 3000 ft | - |
| Peak Engine Torque Gross (SAE J1995) | 1579 lbf·ft | 1275 lbf·ft | - |
| Peak Engine Torque Net (SAE J1349) | 1564 lbf·ft | 1263 lbf·ft | - |
| Peak Engine Torque Speed | 1200 r/min | 1200 r/min | - |
Weights |
|||
| Rated Payload | 30 ton (US) | 26.5 ton (US) | - |
Body Capacities |
|||
| Heaped (SAE 2:1) | 22.1 yd³ | 19.6 yd³ | - |
| Struck | 17.7 yd³ | 14.4 yd³ | - |
| Tailgate Heaped SAE 2:1 | - | 20.4 yd³ | - |
| Tailgate Struck | - | 14.5 yd³ | - |
Transmission |
|||
| Forward - 1 | 5 mile/h | 5 mile/h | - |
| Forward - 2 | 9 mile/h | 9.4 mile/h | - |
| Forward - 3 | 14 mile/h | 14.4 mile/h | - |
| Forward - 4 | 21 mile/h | 22.1 mile/h | - |
| Forward - 5 | 29 mile/h | 30.7 mile/h | - |
| Forward - 6 | 34 mile/h | 36.3 mile/h | - |
| Reverse - 1 | 6 mile/h | 5.5 mile/h | - |
Sound Levels |
|||
| Note (1) | The declared dynamic operator sound pressure level is 72 ± 2 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling | The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f | - |
| Note (2) | Hearing protection may be needed when operating with an open operator station and cab or when not properly maintained or doors/windows open for extended periods or in noisy environments. | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. | - |
Operating Weights |
|||
| Front Axle - Empty | 33356 lb | 30974 lb | - |
| Center Axle - Empty | 12368 lb | 10242 lb | - |
| Rear Axle - Empty | 11839 lb | 9757 lb | - |
| Total - Empty | 57563 lb | 50975 lb | - |
| Front Axle - Rated Load | 1433 lb | 5511 lb | - |
| Center Axle - Rated Load | 29156 lb | 23699 lb | - |
| Rear Axle - Rated Load | 29156 lb | 23699 lb | - |
| Total - Rated Load | 59156 lb | 52910 lb | - |
| Front Axle - Loaded | 34789 lb | 36484 lb | - |
| Center Axle - Loaded | 41524 lb | 33944 lb | - |
| Rear Axle - Loaded | 40995 lb | 33457 lb | - |
| Total - Loaded | 117308 lb | 103886 lb | - |
Body Plate |
|||
| Type | High strength Brinell HB450 wear resistant steel | High strength Brinell HB450 wear resistant steel | - |
Eject/Retract Times |
|||
| Eject Time | 12 s | - | - |
| Retract Time | 15 s | - | - |
Service Refill Capacities |
|||
| Fuel Tank | 106 gal (US) | 91 gal (US) | - |
| DEF Tank | 9 gal (US) | 4 gal (US) | - |
| Cooling System | 21.9 gal (US) | 18 gal (US) | - |
| Hydraulic System | 32.5 gal (US) | - | - |
| Engine Crankcase | 11.4 gal (US) | 8 gal (US) | - |
| Transmission | 12.4 gal (US) | 10 gal (US) | - |
| Final Drives/Differential | 33 gal (US) | - | - |
| Output Transfer Gear Box | 6.6 gal (US) | 5 gal (US) | - |
| Steering/Hoist Hydraulic System | - | 24 gal (US) | - |
| Final Drive - Each | - | 1.6 gal (US) | - |
Standards |
|||
| Brakes | ISO 3450:2011 | ISO 3450 – 2011 | - |
| Cab - FOPS | ISO 3449:2005 Level II | ISO 3449 - 2005 Level II | - |
| Cab - ROPS | ISO 3471:2008 | ISO 3471 – 2008 | - |
| Steering | ISO 5010:2019 | ISO 5010 – 2019 | - |
Turning Circle |
|||
| Turning Dimensions - Steer Angle - Left/Right | 45° | 45° | - |
| Turning Dimensions - SAE Turning Radius | 294 in | 294 in | - |
| Turning Dimensions - Clearance Radius | 318 in | 318 in | - |
| Turning Dimensions - Inside Radius | 148 in | 153 in | - |
| Turning Dimensions - Aisle Width | 214 in | 210 in | - |
| Note | Dimensions are for machines equipped with 750/65 R25 tires. | Dimensions are for machines equipped with 23.5R25 tires. | - |
Steering |
|||
| Lock to Lock | 4.75 seconds @ 60 rpm | 4.75 seconds @ 60 rpm | - |
Optimal Loader/Truck Pass Matching |
|||
| Hydraulic Excavators: 350/352 - Passes | 4-5 | - | - |
| Hydraulic Excavators: 336 - Passes | 5-6 | 5-6 | - |
| Wheel Loaders: 972/972 XE - Passes | 3-4 | 3-4 | - |
| Wheel Loaders: 966/966 XE - Passes | 4 | 4 | - |
| Wheel Loader: 962 - Passes | 4-5 | 4-5 | - |
| Wheel Loader: 950 - Passes | 5 | 5 | - |
| Note | An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased | An optimum system match gives you a major productivity advantage. The 725 is an excellent match for the Cat 349/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased pr | - |
| Hydraulic Excavators: 349/352 - Passes | - | 4-5 | - |
Air Conditioning System |
|||
| Air Conditioning | - | If equipped with R134a (Global Warming Potential = 1430), the system contains 1.1 kg (2.4 lb) of refrigerant which has a CO 2 equivalent of 1.716 metric tonnes (1.891 tons). | - |
Body Plate Thickness |
|||
| Front Plate | - | 0.28 in | - |
| Base Plate | - | 0.51 in | - |
| Side Plates | - | 0.43 in | - |
| Scow | - | 0.51 in | - |
Body Hoist |
|||
| Raise Time | - | 10 s | - |
| Lower Time | - | 8 s | - |
Add a Similar Product:
