Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
-
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,200 rpm. Advert
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time
-
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100
-
Weights
Operating Weight
59100 lb
85310 lb
-
Note
Operating weight includes full fuel tank, operator, 1400 kg (3,086 lb) work tool. Weight varies depending on configuration.
Operating weight includes full fuel tank, 75 kg (165 lb) operator, grapple 2000 kg (4,410 lb) and single tires. Weight varies depending on configuration.
-
Working Ranges
Maximum Reach
39.4 ft
50.8 ft
-
Boom
MH 7.45 m (24'5")
MH 9.3 m (30'6")
-
Stick
5.0 m (16'5") Drop Nose
Industrial 7.1 m (23'3")
-
Maximum Height
42.7 ft
57.4 ft
-
Minimum Dump Height
14.8 ft
17.9 ft
-
Maximum Depth
9.9 ft
17.3 ft
-
Boom Pin Height
30.4 ft
40 ft
-
Transmission
Maximum Travel Speed
12.4 mile/h
11.2 mile/h
-
Drawbar Pull
28551 lbf
34621 lbf
-
Maximum Gradeability
65%
44%
-
Hydraulic System
Maximum Pressure - Implements
5075 psi
5076 psi
-
Maximum Pressure - Swing
5656 psi
4061 psi
-
Maximum Pressure - Travel
5075 psi
5076 psi
-
Swing Mechanism
Swing Speed
8 r/min
7 r/min
-
Maximum Swing Torque
42631 lbf·ft
60628 lbf·ft
-
Service Refill Capacities
Fuel Tank Capacity
92.5 gal (US)
125.2 gal (US)
-
Cooling System
9.5 gal (US)
6.6 gal (US)
-
Engine Oil
3.4 gal (US)
6.6 gal (US)
-
Rear Axle - Housing (Differential)
3.7 gal (US)
9 gal (US)
-
Final Drive - Each
0.7 gal (US)
-
-
Powershift Transmission
0.7 gal (US)
0.8 gal (US)
-
Hydraulic System - Including Tank
91.1 gal (US)
86.9 gal (US)
-
Hydraulic Tank
40.9 gal (US)
38.8 gal (US)
-
Diesel Exhaust Fluid (DEF) Tank
7.9 gal (US)
10.8 gal (US)
-
Final Drive
-
2 gal (US)
-
Dimensions
Boom
MH 7.45 m (24'5")
MH 9.3 m (30'6")
-
Stick
5.0 m (16'5") Drop Nose
Industrial 7.1 m (23'3")
-
Shipping Length
35 ft
42 ft
-
Machine Length
17.4 ft
20.8 ft
-
Tail Swing Radius
8.5 ft
10.3 ft
-
Counterweight Clearance
4.3 ft
5.7 ft
-
Cab Height- Lowered
11 ft
12 ft
-
Cab Height-Lowered with OPG
11 ft
12.5 ft
-
Cab Height-Raised
18.9 ft
20.5 ft
-
Cab Height-Raised with OPG
18.9 ft
21 ft
-
Wheel Base
9 ft
10.5 ft
-
Shipping Width
9.8 ft
9.8 ft
-
Ground Clearance
0.8 ft
0.9 ft
-
Undercarriage Length
17.4 ft
20.4 ft
-
Air Conditioning System
Note (1)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system conta
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system conta
