Compare Equipment Go Back

MH3250 Track Material Handler
MH3022 Wheel Material Handler

Engine

Engine Model Cat C9.3B Cat C4.4 -
Net Power - ISO 9249 311 hp 145 hp -
Net Power - ISO 9249 (DIN) 315 hp (metric) 147 hp (metric) -
Engine Power - ISO 14396 314 hp - -
Engine Power - ISO 14396 (DIN) 318 hp (metric) 150 hp (metric) -
Bore 5 in 4.1 in -
Stroke 6 in 5 in -
Displacement 568 in³ 268.5 in³ -
Biodiesel Capability Up to B20¹ Up to B20¹ -
Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. -
Note (1) Net power advertised is the power available at the flywheel when engine is equipped with fan, air cleaner, exhaust gas aftertreatment, and alternator with engine speed at 1,800 rpm. Advertised power is tested per the specified standard in effect at the ti Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advert -
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO -
Engine Power - Maximum - ISO 14396 - 148 hp -

Weights

Operating Weight 107700 lb 54000 lb -
Note - Operating weight includes full fuel tank, operator, 1400 kg (3,100 lb) work tool. Weight varies depending on configuration. -

Working Ranges

Maximum Reach 52.5 ft 30.4 ft -
Boom MH 9.2 m (30'2") MH 5.35 m (17'7") -
Stick Industrial 7.6 m (24'11") 4.3 m (14'1") Straight -
Maximum Height 55.3 ft 35.3 ft -
Minimum Swing Radius-Front 12.7 ft - -
Maximum Depth 23.3 ft 4.8 ft -
Boom Pin Height 37.6 ft 23.4 ft -
Minimum Dump Height - 10.9 ft -

Transmission

Maximum Travel Speed 2.1 mile/h 12.4 mile/h -
Maximum Drawbar Pull 55281 lbf - -
Gradeability 35°/70% - -
Drawbar Pull - 28551 lb/ft -
Maximum Gradeability - 65% -

Hydraulic System

Maximum Pressure - Implements 5076 psi 5076 psi -
Maximum Pressure - Swing 4061 psi 5294 psi -
Maximum Pressure - Travel 5076 psi 5076 psi -

Swing Mechanism

Swing Speed 8 r/min 8 r/min -
Swing Torque 104734 lbf·ft - -
Maximum Swing Torque - 39553 lbf·ft -

Service Refill Capacities

Fuel Tank Capacity 158.5 gal (US) 92.5 gal (US) -
Cooling System 10.6 gal (US) 9.5 gal (US) -
Engine Oil 8.5 gal (US) 3.4 gal (US) -
Final Drive - Each 4 gal (US) 0.7 gal (US) -
Hydraulic System - Including Tank 98.5 gal (US) 91.1 gal (US) -
Hydraulic Tank 42.5 gal (US) 40.9 gal (US) -
DEF Tank 21.1 gal (US) - -
Rear Axle - Housing (Differential) - 3.7 gal (US) -
Powershift Transmission - 0.7 gal (US) -
Diesel Exhaust Fluid (DEF) Tank - 7.9 gal (US) -

Dimensions

Boom MH 9.2 m (30'2") MH 5.35 m (17'7") -
Stick Industrial 7.6 m (24'11") 4.3 m (14'1") Straight -
Cab Height-Lowered 11.5 ft - -
Cab Height-Lowered with OPG 11.7 ft 11 ft -
Cab Height-Raised 19.8 ft 18.9 ft -
Cab Height-Raised with OPG 20.2 ft 18.9 ft -
Shipping Length (without stick) 41.7 ft - -
Machine Length (with boom/stick) 41.4 ft - -
Upper Frame Width (includes walkways and handrails) 12.5 ft - -
Tail Swing Radius 11.6 ft 8.5 ft -
Counterweight Clearance 4.6 ft 4.3 ft -
Ground Clearance 2.3 ft 1 ft -
Track Length to Center of Rollers 14.2 ft - -
Track Length 17.6 ft - -
Track Gauge-Retracted 10.6 ft - -
Track Gauge- Extended 12.2 ft - -
Undercarriage Width-Retracted, 600 mm (24”) shoes 13.2 ft - -
Undercarriage Width-Extended 14.8 ft - -
Shipping Length - 27.2 ft -
Machine Length - 16.2 ft -
Cab Height- Lowered - 11 ft -
Wheel Base - 8.5 ft -
Shipping Width - 8.3 ft -
Undercarriage Length - 16.1 ft -

Air Conditioning System

Note (1) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.2 kg (2.64 lb) of refrigerant which has a CO2 equivalent of 1.716 metric tonnes (1.892 tons). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.05 kg (2.31 lb) of refrigerant which has a CO2 equivalent of 1.502 metric tonnes (1.655 tons). -

Sustainability

Recyclability 97% - -
Add a Similar Product:
  • MH3026 Wheel Material Handler Add
  • MH3040 Wheel Material Handler Add
  • MH3260 Track Material Handler Add
  • MH3024 Wheel Material Handler Add