Compare Equipment Go Back

MH3022 Wheel Material Handler

Engine

Engine Model Cat C4.4 - -
Net Power - ISO 9249 145 hp - -
Net Power - ISO 9249 (DIN) 147 hp (metric) - -
Engine Power - Maximum - ISO 14396 148 hp - -
Engine Power - ISO 14396 (DIN) 150 hp (metric) - -
Bore 4.1 in - -
Stroke 5 in - -
Displacement 268.5 in³ - -
Biodiesel Capability Up to B20¹ - -
Emissions Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. - -
Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advert - -
Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO - -

Weights

Operating Weight 54000 lb - -
Note Operating weight includes full fuel tank, operator, 1400 kg (3,100 lb) work tool. Weight varies depending on configuration. - -

Working Ranges

Maximum Reach 30.4 ft - -
Boom MH 5.35 m (17'7") - -
Stick 4.3 m (14'1") Straight - -
Maximum Height 35.3 ft - -
Minimum Dump Height 10.9 ft - -
Maximum Depth 4.8 ft - -
Boom Pin Height 23.4 ft - -

Transmission

Maximum Travel Speed 12.4 mile/h - -
Drawbar Pull 28551 lb/ft - -
Maximum Gradeability 65% - -

Hydraulic System

Maximum Pressure - Implements 5076 psi - -
Maximum Pressure - Swing 5294 psi - -
Maximum Pressure - Travel 5076 psi - -

Swing Mechanism

Swing Speed 8 r/min - -
Maximum Swing Torque 39553 lbf·ft - -

Service Refill Capacities

Fuel Tank Capacity 92.5 gal (US) - -
Cooling System 9.5 gal (US) - -
Engine Oil 3.4 gal (US) - -
Rear Axle - Housing (Differential) 3.7 gal (US) - -
Final Drive - Each 0.7 gal (US) - -
Powershift Transmission 0.7 gal (US) - -
Hydraulic System - Including Tank 91.1 gal (US) - -
Hydraulic Tank 40.9 gal (US) - -
Diesel Exhaust Fluid (DEF) Tank 7.9 gal (US) - -

Dimensions

Boom MH 5.35 m (17'7") - -
Stick 4.3 m (14'1") Straight - -
Shipping Length 27.2 ft - -
Machine Length 16.2 ft - -
Tail Swing Radius 8.5 ft - -
Counterweight Clearance 4.3 ft - -
Cab Height- Lowered 11 ft - -
Cab Height-Lowered with OPG 11 ft - -
Cab Height-Raised 18.9 ft - -
Cab Height-Raised with OPG 18.9 ft - -
Wheel Base 8.5 ft - -
Shipping Width 8.3 ft - -
Ground Clearance 1 ft - -
Undercarriage Length 16.1 ft - -

Air Conditioning System

Note (1) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.05 kg (2.31 lb) of refrigerant which has a CO2 equivalent of 1.502 metric tonnes (1.655 tons). - -
Add a Similar Product:
  • MH3026 Wheel Material Handler Add
  • MH3040 Wheel Material Handler Add
  • MH3260 Tracked Material Handler Add
  • MH3024 Wheel Material Handler Add
  • MH3250 Tracked Material Handler Add