Compare Equipment Go Back
 M320 Wheel Excavator |
 M318 Wheel Excavator |
 313 Hydraulic Excavator |
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 174 hp | 174 hp | 110 hp |
| Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 176 hp (metric) | 111 hp (metric) |
| Engine Model | Cat C4.4 | Cat® C4.4 | Cat C3.6 |
| Net Power - ISO 9249 | 171 hp | 171 hp | 108 hp |
| Net Power - ISO 9249 (DIN) | 174 hp (metric) | 174 hp (metric) | 110 hp (metric) |
| Bore | 4.1 in | 4.1 in | 4 in |
| Stroke | 5.3 in | 5 in | 5 in |
| Displacement | 268.5 in³ | 268.5 in³ | 220 in³ |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | Up to B20¹ |
| Emissions | Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, and Korea Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed at 2,200 rpm. Adv | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested p | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100 | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)*** or 100 | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO |
Machine Weight |
|||
| Operating Weight Maximum | 46740 lb | 43980 lb | - |
| Operating Weight Minimum | 41450 lb | 37700 lb | - |
| Note (1) | Operating weight includes full fuel tank, operator, bucket 700 kg (1,543 lb) and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include 2500 mm (8'2") stick, 3600 kg (7,937 lb) counterweight, bucket and 220 kg (485 | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include 2.5 m (8' 2") medium stick and 3700 kg (8,157 lb) counterweight. | - |
Drive |
|||
| Maximum Travel Speed | 21.7 mile/h | 21.7 mile/h | - |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 81 gpm | 67 gpm | - |
| Maximum Pressure - Implement Circuit - Normal | 5076 psi | 5076 psi | - |
| Maximum Pressure - Implement Circuit - Heavy Lift | 5366 psi | 5366 psi | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | 5076 psi | 5076 psi | - |
| Main System - Maximum Flow | - | - | 247 L/min (65 gal/min) |
| Maximum Pressure - Equipment | - | - | 5075 psi |
| Maximum Pressure - Travel | - | - | 5075 psi |
| Maximum Pressure - Swing | - | - | 3770 psi |
Swing Mechanism |
|||
| Maximum Swing Speed* | 9.2 r/min | 9.4 r/min | - |
| Maximum Swing Torque | 38722 lbf·ft | 34739 lbf·ft | 25741 lbf·ft |
| Note (1) | *For CE-marked machine default value may be set lower | *For CE-marked machine default value may be set lower. | - |
| Swing Speed | - | - | 11.5 r/min |
Service Refill Capacities |
|||
| Fuel Tank | 124.2 gal (US) | 92.5 gal (US) | - |
| Diesel Exhaust Fluid (DEF) | 7.9 gal (US) | 5.3 gal (US) | - |
| Cooling System | 8.4 gal (US) | 8.5 gal (US) | 4 gal (US) |
| Hydraulic Tank | 40.9 gal (US) | 31.7 gal (US) | 18.5 gal (US) |
| Hydraulic System - Including Tank | 71.3 gal (US) | 68.7 gal (US) | 22.5 gal (US) |
| Fuel Tank Capacity | - | - | 68.2 gal (US) |
| Engine Oil | - | - | 2.1 gal (US) |
| Final Drive - Each | - | - | 0.8 gal (US) |
| DEF Tank | - | - | 5.6 gal (US) |
Dimensions |
|||
| Boom | Variable Adjustable Boom 5260 mm (17'3") | Variable Adjustable Boom 5.2 m (17'1") | Reach 4.65 m (15'3") |
| Stick | 2500 mm (8'2") | 2.5 m (8' 2") | Reach R3.0 m (9'10") |
| Bucket | GD 0.98 m³ (1.28 yd³) | GD 0.91 m³ (1.19 yd³) | GD 0.53 m³ (0.69 yd³) |
| Shipping Height - Top of Cab | 11.1 ft | 11 ft | 9.3 ft |
| Shipping Length | 29.3 ft | 27.4 ft | 25.5 ft |
| Support Point | 11.7 ft | 10.1 ft | - |
| Tail Swing Radius | 8.5 ft | 7.7 ft | 7.2 ft |
| Counterweight Clearance | 4.3 ft | 4.3 ft | 3 ft |
| Ground Clearance | 1.4 ft | 1.1 ft | 1.5 ft |
| Undercarriage Length | 16.6 ft | 16.6 ft | - |
| Wheel Base | 8.9 ft | 8.9 ft | - |
| Handrail Height | - | - | 9.3 ft |
| Shipping Length - with Blade | - | - | 26.4 ft |
| Track Length | - | - | 12.3 ft |
| Length to Center of Rollers | - | - | 10 ft |
| Track Gauge | - | - | 6.5 ft |
| Transport Width | - | - | 8.2 ft |
Working Ranges and Forces |
|||
| Boom | Variable Adjustable Boom 5260 mm (17'3") | Variable Adjustable Boom 5.2 m (17'1") | Reach 4.65 m (15'3") |
| Stick | 2500 mm (8'2") | 2.5 m (8' 2") | Reach R3.0 m (9'10") |
| Bucket | GD 0.98 m³ (1.28 yd³) | GD 0.91 m³ (1.19 yd³) | GD 0.53 m³ (0.69 yd³) |
| Maximum Cutting Height | 32.6 ft | 33.7 ft | 29 ft |
| Maximum Loading Height | 22.8 ft | 24 ft | 21.1 ft |
| Maximum Digging Depth | 19.8 ft | 19.3 ft | 19.2 ft |
| Maximum Vertical Wall Digging Depth | 13.9 ft | 15.1 ft | 17 ft |
| Maximum Reach at Ground Line | 30.5 ft | 30.2 ft | - |
| Stick Forces (ISO) | 20682 lbf | 16861 lbf | - |
| Bucket Forces (ISO) | 30799 lbf | 26752 lbf | - |
| Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1535 mm (5'0"). Force values are calculated with heavy lift on, a GD bucket (pin-on) and a tip radius of | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | - |
| Maximum Reach at Ground Level | - | - | 28.4 ft |
| Minimum Loading Height | - | - | 5.3 ft |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | - | 19.3 ft |
| Minimum Working Equipment Radius | - | - | 8.4 ft |
| Bucket Digging Force - ISO | - | - | 22180 lbf |
| Stick Digging Force - ISO | - | - | 13330 lbf |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system conta | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. If equipped with R134a (Global Warming Potential = 1430), the system conta | - |
| Air Conditioning | - | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 hg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
Sustainability |
|||
| Recyclability | - | 92% | 95% |
Weights |
|||
| Operating Weight | - | - | 30400 lb |
Add a Similar Product:
