Compare Equipment Go Back
 M318 Wheel Excavator |
 317 Hydraulic Excavator |
|
|
Engine |
|||
|---|---|---|---|
| Engine Power - ISO 14396 | 174 hp | 134 hp | - |
| Engine Power - ISO 14396 (DIN) | 176 hp (metric) | 136 hp (metric) | - |
| Engine Model | Cat® C4.4 | Cat C3.6 | - |
| Net Power - ISO 9249 | 171 hp | 133 hp | - |
| Net Power - ISO 9249 (DIN) | 174 hp (metric) | 134 hp (metric) | - |
| Bore | 4.1 in | 4 in | - |
| Stroke | 5 in | 5 in | - |
| Displacement | 268.5 in³ | 220 in³ | - |
| Biodiesel Capability | Up to B20¹ | Up to B20¹ | - |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Korea Stage V emission standards. | Meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 emission standards. | - |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan with engine speed at 2,200 rpm. Advertised power is tested p | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time | - |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO | - |
Machine Weight |
|||
| Operating Weight Maximum | 43980 lb | - | - |
| Operating Weight Minimum | 37700 lb | - | - |
| Note (1) | Operating weight includes full fuel tank, operator, bucket 610 kg (1,340 lb), and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include 2.5 m (8' 2") medium stick and 3700 kg (8,157 lb) counterweight. | - | - |
Drive |
|||
| Maximum Travel Speed | 21.7 mile/h | - | - |
Hydraulic System |
|||
| Main System - Maximum Flow - Implement | 67 gpm | - | - |
| Maximum Pressure - Implement Circuit - Normal | 5076 psi | - | - |
| Maximum Pressure - Implement Circuit - Heavy Lift | 5366 psi | - | - |
| Maximum Pressure - Implement Circuit - Travel Circuit | 5076 psi | - | - |
| Main System - Maximum Flow | - | 296 L/min (78 gal/min) | - |
| Maximum Pressure - Equipment | - | 5075 psi | - |
| Maximum Pressure - Travel | - | 5075 psi | - |
| Maximum Pressure - Swing | - | 3741 psi | - |
Swing Mechanism |
|||
| Maximum Swing Speed* | 9.4 r/min | - | - |
| Maximum Swing Torque | 34739 lbf·ft | 47647 lbf·ft | - |
| Note (1) | *For CE-marked machine default value may be set lower. | - | - |
| Swing Speed | - | 8.7 r/min | - |
Service Refill Capacities |
|||
| Fuel Tank | 92.5 gal (US) | - | - |
| Diesel Exhaust Fluid (DEF) | 5.3 gal (US) | - | - |
| Cooling System | 8.5 gal (US) | 5.8 gal (US) | - |
| Hydraulic Tank | 31.7 gal (US) | 23 gal (US) | - |
| Hydraulic System - Including Tank | 68.7 gal (US) | 24.8 gal (US) | - |
| Fuel Tank Capacity | - | 71.6 gal (US) | - |
| Engine Oil | - | 2.9 gal (US) | - |
| Final Drive - Each | - | 1.6 gal (US) | - |
| DEF Tank | - | 5.9 gal (US) | - |
Dimensions |
|||
| Boom | Variable Adjustable Boom 5.2 m (17'1") | Reach 5.1 m (16'9") | - |
| Stick | 2.5 m (8' 2") | Reach R2.9 m (9'6") | - |
| Bucket | GD 0.91 m³ (1.19 yd³) | GD 0.76 m³ (0.99 yd³) | - |
| Shipping Height - Top of Cab | 11 ft | 9.6 ft | - |
| Shipping Length | 27.4 ft | 28.1 ft | - |
| Support Point | 10.1 ft | - | - |
| Tail Swing Radius | 7.7 ft | 8.2 ft | - |
| Counterweight Clearance | 4.3 ft | 3.3 ft | - |
| Ground Clearance | 1.1 ft | 1.4 ft | - |
| Undercarriage Length | 16.6 ft | - | - |
| Wheel Base | 8.9 ft | - | - |
| Handrail Height | - | 9.7 ft | - |
| Track Length | - | 13 ft | - |
| Length to Center of Rollers | - | 10.4 ft | - |
| Track Gauge | - | 6.5 ft | - |
| Transport Width | - | 8.8 ft | - |
Working Ranges and Forces |
|||
| Boom | Variable Adjustable Boom 5.2 m (17'1") | Reach 5.1 m (16'9") | - |
| Stick | 2.5 m (8' 2") | Reach R2.9 m (9'6") | - |
| Bucket | GD 0.91 m³ (1.19 yd³) | GD 0.76 m³ (0.99 yd³) | - |
| Maximum Cutting Height | 33.7 ft | 29.2 ft | - |
| Maximum Loading Height | 24 ft | 20.6 ft | - |
| Maximum Digging Depth | 19.3 ft | 21 ft | - |
| Maximum Vertical Wall Digging Depth | 15.1 ft | 16.3 ft | - |
| Maximum Reach at Ground Line | 30.2 ft | - | - |
| Stick Forces (ISO) | 16861 lbf | - | - |
| Bucket Forces (ISO) | 26752 lbf | - | - |
| Note (1) | Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on), and a tip radius o | - | - |
| Maximum Reach at Ground Level | - | 29.6 ft | - |
| Minimum Loading Height | - | 6.5 ft | - |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | - | 20.3 ft | - |
| Minimum Working Equipment Radius | - | 9.7 ft | - |
| Bucket Digging Force - ISO | - | 27650 lbf | - |
| Stick Digging Force - ISO | - | 16860 lbf | - |
Air Conditioning System |
|||
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons). | - | - |
| Air Conditioning | - | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.9 hg of refrigerant which has a CO2 equivalent of 1.418 metric tonnes. | - |
Sustainability |
|||
| Recyclability | 92% | - | - |
Weights |
|||
| Operating Weight | - | 40200 lb | - |
Add a Similar Product:
