Option 2 - China Nonroad Stage III emissions standards, equivalent to U.S. EPA Tier 2
Option 2 - Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
-
Engine Power - ISO 14396:2002
786 hp
275 hp
-
Gross Power - SAE J1995:2014
766 hp
286 hp
-
Net Power - SAE J1349:2011 - High Ambient
648 hp
-
-
Engine Power - ISO 14396: 2002
752 hp
275 hp
-
Bore
5.4 in
4.1 in
-
Stroke
6 in
5.3 in
-
Displacement
1649.5 in³
427.8 in³
-
Peak Torque - Speed
2624 lb/ft
-
-
Torque Rise
18 %
26 %
-
Note
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
-
-
Net Power - SAE J1349:2011
-
249 hp
-
Net Power - ISO 9249:2007
-
249 hp
-
Peak Torque (1400 rpm)
-
902 lbf·ft
-
Peak Torque ( 1,400 rpm )
-
749 lbf·ft
-
High Idle Speed
-
2270 r/min
-
Low Idle Speed
-
800 r/min
-
Maximum Altitude without Derating
-
9842.5 ft
-
Note (1)
-
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module, and alternator.
-
Operating Specifications
Operating Weight
165089 lb
-
-
Blade Capacity Range
20.8 yd³
-
-
Operating Weight (Tier 4 Final/Stage V)
-
48526 lb
-
Operating Weight (Tier 3/Stage IIIA equivalent)
-
47887 lb
-
Transmission
Transmission Type
Cat Planetary Power Shift
Cat Planetary Power Shift
-
Converter Drive - Forward 1
4.5 mile/h
-
-
Converter Drive - Forward 2
8.3 mile/h
-
-
Converter Drive - Forward 3
14.2 mile/h
-
-
Converter Drive - Reverse 1
4.9 mile/h
-
-
Converter Drive - Reverse 2
9.1 mile/h
-
-
Converter Drive - Reverse 3
15.5 mile/h
-
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
8.5 mile/h
-
-
Direct Drive - Forward 3
15.2 mile/h
-
-
Direct Drive - Reverse 1
5.4 mile/h
-
-
Direct Drive - Reverse 2
9.6 mile/h
-
-
Direct Drive - Reverse 3
16.4 mile/h
-
-
Note
Travel speeds based on 45/65-45 L-5 46 ply tires.
-
-
Forward - 1
-
3.7 mile/h
-
Forward - 2
-
6.5 mile/h
-
Forward - 3
-
11.2 mile/h
-
Forward - 4
-
19.4 mile/h
-
Reverse - 1
-
4.2 mile/h
-
Reverse - 2
-
7.3 mile/h
-
Reverse - 3
-
12.8 mile/h
-
Reverse - 4
-
22.1 mile/h
-
Hydraulic System - Lift/Tilt
Output at 2,000 rpm and 6900 kPa (1,000 psi)
82 gpm
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
133 mm × 1535 mm (5.25 in × 60.4 in)
120 mm × 915 mm (4.7 in × 36.0 in)
-
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke
-
101.6 mm × 234 mm (4.0 in × 9.2 in)
-
Pilot System
-
Open center, fixed displacement gear
-
Pilot Relief Valve Setting
-
3046 psi
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
Pilot, load sensing
-
Steering System - Pump
Piston, variable displacement
Variable displacement piston
-
Minimum Turning Radius - Over Blade
34 ft
-
-
Total Steering Angle
35 °
72°
-
Maximum Flow
94.3 gpm
-
-
Relief Valve Setting
4500 psi
-
-
Maximum Flow at 2,200 rpm
-
38.8 gpm
-
Relief Valve Setting - Steering
-
4003 psi
-
Steering Cycle Times - High Idle
-
3 s
-
Steering Cycle Times - Low Idle
-
8.2 s
-
Service Refill Capacities
Fuel Tank - Standard
286.6 gal (US)
-
-
Cooling System
54.9 gal (US)
-
-
Crankcase
20 gal (US)
-
-
Transmission
29.1 gal (US)
13.2 gal (US)
-
Differential - Final Drives - Front
71.6 gal (US)
17.2 gal (US)
-
Differential - Final Drives - Rear
68.9 gal (US)
17.2 gal (US)
-
Hydraulic System - Implement and Hydraulic Fan
68.9 gal (US)
-
-
Hydraulic System - Steering and Braking
34.9 gal (US)
-
-
Fuel Tank
-
132.1 gal (US)
-
Diesel Exhaust Fluid Tank
-
4.2 gal (US)
-
Cooling Systems - Tier 4 Final/EU Stage V
-
21.4 gal (US)
-
Cooling Systems - Tier 3/Stage IIIA equivalent
-
19.3 gal (US)
-
Engine Crankcase
-
5.3 gal (US)
-
Hydraulic System - Implement/Steering
-
34.1 gal (US)
-
Hydraulic Tank Only
-
19.8 gal (US)
-
Note (1)
-
All nonroad Tier 4 Final and EU Stage V diesel engines are required to use: – Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. – Cat engines are compatible with the following renewable, alternative, and biodiesel* fuels that
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con
-
Axles
Front
Fixed
Planetary – Fixed
-
Rear
Trunnion
Planetary – Oscillating
-
Oscillation Angle
8.5 °
±10°
-
Brakes
Brakes
Meets ISO 3540:2011
-
-
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)
116 dB(A)
111 dB(A)
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
70 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)*
114 dB(A)
109 dB(A)
-
Note (1)
*Sound suppression equipped
* Sound suppression equipped
-
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
-
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
-
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)
116 dB(A)
-
-
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
-
-
Machine Sound Power Level (ISO 6395:2008)*
114 dB(A)
-
-
Note (1)
*Sound suppression equipped
-
-
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
-
-
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
-
Cab
ROPS/FOPS
ISO 3471:2008 and ISO 3449:2005 Level II Standards
-
-
Dimensions (Approximate)
Height - Top of ROPS
17.2 ft
-
-
Height - Top of Exhaust Pipe
16.6 ft
11.3 ft
-
Height - Top of Hood
12.7 ft
8.7 ft
-
Ground Clearance
2 ft
-
-
Centerline of Front Axle to Hitch
7.5 ft
5.5 ft
-
Centerline of Rear Axle to Edge of Bumper
12.5 ft
-
-
Wheel Base
15.1 ft
11 ft
-
Length - With Blade on Ground
36.5 ft
-
-
Height to Top of Beacon
-
13.1 ft
-
Height - Top of Cab
-
12.1 ft
-
Height to Top of Radiator Guard
-
8 ft
-
Ground Clearance to Hitch
-
1.4 ft
-
Ground Clearance to Transmission Guard
-
1.4 ft
-
Ground Clearance to Bottom of Bumper
-
2.3 ft
-
Centerline of Rear Axle to Bumper
-
6.5 ft
-
Width over Platform
-
10.3 ft
-
Overall Length to Front Tire
-
21 ft
-
Overall Machine Length with Straight Blade
-
23.6 ft
-
Overall Machine Length with Coal Blade
-
25.5 ft
-
Braking System
Service Brakes
-
Single Disc Wet (enclosed) 4 WHL
-
Parking Brake
-
Drum and Shoe, Spring Applied, Hydraulic Released
-
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)
-
72 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)
-
112 dB(A)
-
Operator Sound Pressure Level (ISO 6396:2008)*
-
70 dB(A)
-
Machine Sound Power Level (ISO 6395:2008)*
-
110 dB(A)
-
Note (1)
-
* Sound suppression equipped
-
Note (2)
-
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at maximum engine cooling fan speed.
-
Note (3)
-
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at maximum engine cooling fan speed.
-
Note (4)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
