Compare

Compare Equipment Go Back

Engine
	990 Wheel Loader View Product	988 Wheel Loader View Product Remove	903D Compact Wheel Loader View Product Remove	988 GC Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	752 hp	580 hp	-	-
Engine Model	Cat® C27	Cat® C18	Cat C2.4*	Cat® C15
Emissions	Option 2 - Emits equivalent to U.S. EPA Tier 2	-	-	-
Rated Speed	1800 r/min	1700/rpm	-	2000 rpm
Gross Power - SAE J1995:2014	766 hp	588 hp	-	456 hp
Net Power - SAE J1349:2011 - Standard Ambient	699 hp	-	-	-
Net Power - SAE J1349:2011 - High Ambient	648 hp	-	-	-
Bore	5.4 in	5.7 in	3.4 in	5.4 in
Stroke	6 in	7.2 in	4 in	6.75 in
Displacement	1649.5 in³	1105 in³	147 in²	927 in³
Peak Torque - 1,200 rpm	2624 lb/ft	2104 lbf·ft	-	-
Torque Rise	18 %	58 %	-	16%
Note	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	-	*Engine meets U.S. EPA Tier 4 Final emission standards.	-
Peak Power Speed	-	1500/rpm	-	1600 rpm
Net Power - SAE J1349:2011	-	538 hp	-	448 hp
Note (1)	-	Three engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. 3. Meets China Nonroad Stage IV emissio	-	Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (2)	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Maximum Gross Power	-	-	42 hp	-
Gross Power	-	-	42 hp	-
Net Power - 2,200 rpm - SAE J1349 R-ing	-	-	40 hp	-
Net Power - 2,200 rpm - ISO 9249 R-ing	-	-	40 hp	-
Peak Torque (1,200 rpm) - SAE J1995:2014	-	-	-	1778 lbf·ft
Note (3)	-	-	-	Net power at the flywheel when the fan is at maximum speed is 304 kW / 408 hp per SAE reference conditions.
Operating Specifications
Operating Weight - Standard	178517 lb	-	-	-
Bucket Capacity Range	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	4.7-13 m3 (6.2-17 yd3)	-	6.4-7.6 m3 (8.3-10 yd3)
Rated Payload - Standard	17.5 ton (US)	-	-	-
Rated Payload - High Lift	17.5 ton (US)	-	-	-
Cat Truck Match - Standard	773-775	770 - 772	-	-
Cat Truck Match - High Lift	775-777	773 - 775	-	772/773/775
Operating Weight	-	112574 lb	-	112426 lb
Rated Payload - Quarry Face	-	12.5 t	-	12.5 ton (US)
Rated Payload - Loose Material	-	16 t	-	-
Transmission
Transmission Type	Cat planetary power shift	Cat planetary powershift	-	Cat planetary power shift
Forward - 1	4.6 mile/h	4 mile/h	-	5 mile/h
Forward - 2	8.2 mile/h	7.2 mile/h	-	8 mile/h
Forward - 3	14.5 mile/h	12.7 mile/h	-	-
Reverse - 1	5.1 mile/h	4.7 mile/h	-	5 mile/h
Reverse - 2	9.1 mile/h	8.3 mile/h	-	8 mile/h
Reverse - 3	16 mile/h	14.4 mile/h	-	-
Direct Drive - Forward 1	Lock-up disabled	Lock-up disabled	-	Lock-up disabled
Direct Drive - Forward 2	8.2 mile/h	7.8 mile/h	-	8 mile/h
Direct Drive - Forward 3	14.5 mile/h	13.9 mile/h	-	14 mile/h
Direct Drive - Reverse 1	5.1 mile/h	5 mile/h	-	Lock-up disabled
Direct Drive - Reverse 2	9.1 mile/h	8.9 mile/h	-	9 mile/h
Direct Drive - Reverse 3	16 mile/h	15.8 mile/h	-	16 mile/h
Note	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	-	-	Travel speeds based on 35/65-R33 tires.
Forward - 4	-	21.6 mile/h	-	-
Direct Drive - Forward 4	-	24.4 mile/h	-	24 mile/h
Travel Speed	-	-	12.4 mile/h	-
Direct Drive - Reverse 4	-	-	-	25.4 mile/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	Positive flow control	EH- Positive Flow Control, Flow Sharing	-	EH - Load Sense
Lift/Tilt System	Variable displacement piston	-	-	-
Maximum Flow at 1,800 rpm	240 gpm	-	-	-
Relief Valve Setting - Lift/Tilt	4786 psi	4757 psi	-	4598 psi
Cylinders, Double Acting - Lift, Bore and Stroke	235 mm × 1287 mm (9.3 in × 50.7 in)	210 mm × 1050 mm (8.7 in × 41.3 in)	-	190 mm x 1216 mm (7.5 in x 48 in)
Cylinders, Double Acting - Tilt, Bore and Stroke	292.1 mm × 820 mm (11.5 in × 32.3 in)	266 mm × 685 mm (8.7 in × 27 in)	-	170 mm x 722 mm (6.7 in x 28.4 in)
Pilot System	Open loop and pressure reducing	Variable displacement piston	-	Variable displacement piston
Pilot Relief Setting	507 psi	-	-	-
Lift/Tilt System - Pump	-	Variable displacement piston	-	Variable displacement piston
Maximum Flow at 1,400-1,860 rpm	-	153 gpm	-	-
Relief Valve Setting - Main	-	551 psi	-	-
Maximum Flow at 2,165 rpm	-	-	-	159 gpm
Relief Valve Setting	-	-	-	500 psi
Hydraulic Cycle Times
Rack Back	4.3 s	-	-	3.8 s
Raise	8.6 s	-	-	7.5 s
Dump	2.9 s	-	-	3 s
Lower	3.7 s	-	-	-
Lower Float Down	3.7 s	-	-	4.6 s
Total Hydraulic Cycle Time - Empty Bucket	13.8 s	-	-	18.9 s
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, load sensing	-	Pilot, load sensing
Steering System - Pump	Piston, variable displacement	Piston, variable displacement	-	Piston, variable displacement
Maximum Flow at 1,400 rpm	96.2 gpm	-	-	-
Relief Valve Setting - Steering	5004 psi	4351 psi	-	4000 psi
Total Steering Angle	70°	86 °	-	70°
Maximum Flow at 1,400-1,600 rpm	-	71.3 gpm	-	-
Steering Cycle Times - High Idle	-	3.4 s	-	3 s
Steering Cycle Times - Low Idle	-	5.6 s	-	5.2 s
Maximum Flow at 2,165 rpm	-	-	-	52 gpm
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Axles
Front	Fixed	Fixed	-	Fixed
Rear	Trunnion	Trunnion	-	Trunnion
Oscillation Angle	8.5°	13 °	-	+/-12.5°
Brakes
Brakes	ISO 3450: 2011	ISO 3450:2011	-	ISO 3450:2011
Service Refill Capacities
Fuel Tank	281 gal (US)	188 gal (US)	11.4 gal (US)	141 gal (US)
Cooling System	54.9 gal (US)	31.7 gal (US)	3 gal (US)	27 gal (US)
Engine Crankcase	20 gal (US)	-	-	9 gal (US)
Transmission	29.1 gal (US)	24.3 gal (US)	-	20 gal (US)
Differential - Final Drives - Front	71.6 gal (US)	49.1 gal (US)	-	49 gal (US)
Differential - Final Drives - Rear	68.9 gal (US)	49.1 gal (US)	-	45 gal (US)
Hydraulic System Factory Fill	210 gal (US)	125.5 gal (US)	-	94 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan	68.9 gal (US)	-	-	-
Hydraulic Tank - Steering and Braking	34.9 gal (US)	-	-	-
Note	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	• All non-road Tier 4 Final/Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: – 20% biodiesel FAME (fatty acid methyl ester	-	Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty acid methyl ester) * - 10
Coolant (Validated by Test Cell Fill Quantities)	-	33 gal (US)	-	-
Crankcase	-	15.9 gal (US)	-	-
Diesel Exhaust Fluid Tank (For Tier 4 Final/Stage V Only)	-	8.7 gal (US)	-	-
Transmission - Validated by Test Cell Fill Quantities	-	29 gal (US)	-	-
Hydraulic System - Tank Only	-	63.4 gal (US)	-	-
Hydraulic System	-	-	6.3 gal (US)	-
Engine Oil	-	-	2.4 gal (US)	-
Diesel Exhaust Fluid Tank	-	-	-	5.5 gal (US)
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	73 dB(A)	-	73 dB(A)
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	111 dB(A)	-	113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	72 dB(A)	-	72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-
Note (1)	*Sound suppression equipped	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Machine Sound Power Level (ISO 6395:2008)**	-	109 dB(A)	-	110 dB(A)
Note (5)	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-
Note (1)	*Sound suppression equipped	-	-	-
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	17.2 ft	13.8 ft	-	-
Ground to Top of Exhaust Stacks	16.6 ft	14.8 ft	-	-
Ground to Top of Hood	12.7 ft	10.9 ft	-	-
Ground to Bumper Clearance	3.5 ft	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	10.5 ft	-	-
Front Axle Centerline to Bucket Tip	15.4 ft	14 ft	-	-
Wheel Base	15.1 ft	14.9 ft	-	-
Maximum Overall Length	42.9 ft	39.3 ft	-	-
Ground to Lower Hitch Clearance	2 ft	1.9 ft	-	-
Ground to Center of Front Axle	4.2 ft	-	-	-
Clearance at Maximum Lift	7.2 ft	11.9 ft	-	-
Rack Back Angle at Ground Level	40.4°	-	-	-
Rack Back Angle at Carry	48.8°	-	-	-
B-Pin Height - Maximum Lift	19.7 ft	18 ft	-	-
Maximum Overall Height - Bucket Raised	27.2 ft	24.5 ft	-	-
Rack Angle at Maximum Lift	63.7°	-	-	-
Dump Angle at Maximum Lift	45°	-	-	-
Reach - Maximum Lift	7.2 ft	6.5 ft	-	-
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	17.2 ft	13.8 ft	-	-
Ground to Top of Exhaust Stacks	16.6 ft	14.8 ft	-	-
Ground to Top of Hood	12.7 ft	10.9 ft	-	-
Ground to Bumper Clearance	3.5 ft	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	10.5 ft	-	-
Front Axle Centerline to Bucket Tip	17.8 ft	15.3 ft	-	-
Wheel Base	15.1 ft	14.9 ft	-	-
Maximum Overall Length	45.3 ft	40.7 ft	-	-
Ground to Lower Hitch Clearance	2 ft	1.9 ft	-	-
Ground to Center of Front Axle	4.2 ft	-	-	-
Clearance at Maximum Lift	14.8 ft	13.3 ft	-	-
Rack Back Angle at Ground Level	39.9°	-	-	-
Rack Back Angle at Carry	49.3°	-	-	-
B-Pin Height - Maximum Lift	21.2 ft	19.3 ft	-	-
Maximum Overall Height - Bucket Raised	28.7 ft	25.8 ft	-	-
Rack Angle at Maximum Lift	60.6°	-	-	-
Dump Angle at Maximum Lift	51°	-	-	-
Reach - Maximum Lift	8.5 ft	6.8 ft	-	-
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-
Hydraulic Cycle Time (1,400-1,860 rpm)
Rack Back	-	4.5 s	-	-
Raise	-	8 s	-	-
Dump	-	2.2 s	-	-
Lower Float Down	-	3.5 s	-	-
Total Hydraulic Cycle Time - Empty Bucket	-	18.2 s	-	-
Operator's Cab
ROPS/FOPS	-	ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards	-	Rollover Protective Structure/Falling Objects Protective Structure (ROPS/FOPS) meet ISO 3471:2008 and ISO 3449:2005 Level II standards
Sound Performance - Tier 3 / Stage IIIA
Operator Sound Pressure Level (ISO 6396:2008)	-	73 dB(A)	-	74 dB(A)
Machine Sound Power Level (ISO 6395:2008)	-	112 dB(A)	-	113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*	-	72 dB(A)	-	73 dB(A)
Machine Sound Power Level (ISO 6395:2008)**	-	110 dB(A)	-	110 dB(A)
Note (1)	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”	-	* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
Note (2)	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.	-	** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
Note (3)	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (4)	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.	-	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (5)	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Weights
Operating Weight	-	-	9414 lb	-
Buckets
Bucket Capacities	-	-	0.6-1.0 m3 (0.8-1.3 yd3)	-
Bucket Capacities - General Purpose	-	-	0.6 m3 (0.8 yd3)	-
Bucket Capacities - Light Material	-	-	1.0 m3 (1.3 yd3)	-
Hydraulic System
Main Relief	-	-	3481 psi	-
3rd Auxiliary Flow	-	-	14 gpm	-
Hydraulic Cycle Time - Lower, Float	-	-	2.4 s	-
Loader Hydraulic System
Hydraulic Cycle Time - Lift	-	-	4.4 s	-
Hydraulic Cycle Time - Dump	-	-	0.7 s	-
Cab
ROPS	-	-	ISO 3471:2008	-
FOPS	-	-	ISO 3449:2005 Level I	-
Dimensions (Approximate) - Standard Lift
Cab Height	-	-	8.25 ft	-
Ground Clearance	-	-	10 in	-
Wheel Base	-	-	6.42 ft	-
Overall Length - With Bucket*	-	-	15.75 ft	-
Reach at Maximum Dump Height*	-	-	2.33 ft	-
Dig Depth	-	-	6 in	-
Maximum Dump Height*	-	-	7.5 ft	-
Load Over Height	-	-	9.17 ft	-
Hinge Pin at Maximum Height	-	-	10.08 ft	-
Departure Angle - Degrees	-	-	30°	-
Overall Length - With Forks	-	-	17.08 ft	-
Reach - Ground Level	-	-	2.67 ft	-
Maximum Reach	-	-	4.5 ft	-
Fork Depth Above Ground	-	-	2 in	-
Fork Height at Maximum Reach	-	-	4.67 ft	-
Maximum Fork Height	-	-	9.83 ft	-
Fork Reach at Maximum Height	-	-	2 ft	-
Turning Radius - Over Bucket*	-	-	13.17 ft	-
Turning Radius - Inside Tire**	-	-	5.92 ft	-
Width - Over Bucket*	-	-	5.83 ft	-
Tire Gauge	-	-	4.33 ft	-
Machine Width**	-	-	5.58 ft	-
Articulation Angle	-	-	40°	-
Steering Angle	-	-	80°	-
Dump Angle at Maximum Height	-	-	40°	-
Note (1)	-	-	*Vary with bucket size.	-
Note (2)	-	-	**Vary with tire size.	-
Note (3)	-	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-
Dimensions (Approximate) - High Lift
Cab Height	-	-	8.25 ft	-
Ground Clearance	-	-	10 in	-
Wheel Base	-	-	6.42 ft	12.5 ft
Overall Length - With Bucket*	-	-	16.17 ft	-
Reach at Maximum Dump Height*	-	-	2.42 ft	-
Dig Depth	-	-	8 in	-
Maximum Dump Height*	-	-	8 ft	-
Load Over Height	-	-	9.67 ft	-
Hinge Pin at Maximum Height	-	-	10.58 ft	-
Departure Angle - Degrees	-	-	30°	-
Overall Length - With Forks	-	-	17.58 ft	-
Reach - Ground Level	-	-	3.25 ft	-
Maximum Reach	-	-	4.92 ft	-
Fork Depth Above Ground	-	-	2 in	-
Fork Height at Maximum Reach	-	-	4.67 ft	-
Maximum Fork Height	-	-	10.33 ft	-
Fork Reach at Maximum Height	-	-	2 ft	-
Turning Radius - Over Bucket*	-	-	13.42 ft	-
Turning Radius - Inside Tire**	-	-	5.92 ft	-
Width - Over Bucket*	-	-	5.83 ft	-
Tire Gauge	-	-	4.33 ft	-
Machine Width**	-	-	5.58 ft	-
Articulation Angle	-	-	40°	-
Steering Angle	-	-	80°	-
Dump Angle at Maximum Height	-	-	40°	-
Note (1)	-	-	*Vary with bucket size.	-
Note (2)	-	-	**Vary with tire size.	-
Note (3)	-	-	Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.	-
Ground to Top of ROPS	-	-	-	13.5 ft
Ground to Top of Exhaust Stacks	-	-	-	13.3 ft
Ground to Top of Hood	-	-	-	10.7 ft
Ground to Fuel Tank Clearance	-	-	-	2.2 ft
Rear Axle - Centerline to Bumper	-	-	-	10.3 ft
Front Axle Centerline to Bucket Tip	-	-	-	16.7 ft
Maximum Overall Length	-	-	-	39.5 ft
Ground to Lower Hitch Clearance	-	-	-	1.5 ft
Ground to Center of Front Axle	-	-	-	3.2 ft
Clearance at Maximum Lift (45° Dump)	-	-	-	12 ft
B-Pin Height - Maximum Lift	-	-	-	18.7 ft
Maximum Overall Height - Bucket Raised	-	-	-	25 ft
Reach at Maximum Lift (45° Dump)	-	-	-	7.7 ft
Note	-	-	-	Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.
Operating Specifications - Standard Lift
Tire Size	-	-	33 × 15.5-16.5, 12 PR	-
Rated Bucket Capacity	-	-	0.8 yd³	-
Breakout Force	-	-	6160 lbf	-
Operating Weight	-	-	9414 lb	-
Rated Operating Load at Full Turn - Bucket***	-	-	2701 lb	-
Straight Tipping Load - Bucket***	-	-	6415 lb	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	-	5401 lb	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	-	5512 lb	-
Rack Back - Transport Position	-	-	51°	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	-	3366 lb	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	-	2524 lb	-
Note (1)	-	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-
Note (2)	-	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-
Note (3)	-	-	***Manual quick coupler, precleaner hood.	-
Note (4)	-	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-
Operating Specifications - High Lift
Tire Size	-	-	33 × 15.5-16.5, 12 PR	-
Rated Bucket Capacity	-	-	0.8 yd³	-
Breakout Force	-	-	6204 lbf	-
Operating Weight	-	-	9462 lb	-
Rated Operating Load at Full Turn - Bucket***	-	-	2502 lb	-
Straight Tipping Load - Bucket***	-	-	5975 lb	-
Full Turn Static Tipping Load - Bucket (ISO 14397-1)**	-	-	5004 lb	-
Full Turn Static Tipping Load - Bucket (Rigid Tire)*	-	-	5115 lb	-
Rack Back - Transport Position	-	-	51°	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***	-	-	3148 lb	-
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***	-	-	2361 lb	-
Note (1)	-	-	*Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.	-
Note (2)	-	-	**Compliance to ISO 14397-1 (2007) Sections 1 thru 5.	-
Note (3)	-	-	***Manual quick coupler, precleaner hood.	-
Note (4)	-	-	Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.	-
Maximum Material Densities - General Purpose
Bucket Type	-	-	General Purpose	-
Rated Capacity	-	-	0.8 yd³	-
Dump Height	-	-	90 in	-
Maximum Material Density	-	-	3169 lb/yd³	-
Bucket Width	-	-	70 in	-
Note	-	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-
Maximum Material Densities - Light Material
Bucket Type	-	-	Light Material	-
Rated Capacity	-	-	1.3 yd³	-
Dump Height	-	-	85 in	-
Maximum Material Density	-	-	1989 lb/yd³	-
Bucket Width	-	-	74 in	-
Note	-	-	Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.	-
Sustainability
Recyclability	-	-	97%	-

Compare Equipment Go Back

990 Wheel Loader

988 Wheel Loader

903D Compact Wheel Loader

988 GC Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Service Refill Capacities

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 2

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Hydraulic Cycle Time (1,400-1,860 rpm)

Operator's Cab

Sound Performance - Tier 3 / Stage IIIA

Weights

Buckets

Hydraulic System

Loader Hydraulic System

Cab

Dimensions (Approximate) - Standard Lift

Dimensions (Approximate) - High Lift

Operating Specifications - Standard Lift

Operating Specifications - High Lift

Maximum Material Densities - General Purpose

Maximum Material Densities - Light Material

Sustainability

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us