Compare

Compare Equipment Go Back

Engine
	990 Wheel Loader View Product	995 Wheel Loader View Product Remove	910 Compact Wheel Loader View Product Remove	992 Wheel Loader View Product Remove
Engine Power - ISO 14396:2002	752 hp	-	-	-
Engine Model	Cat® C27	Cat® 3516E	Cat C3.6	Cat® C32B
Emissions	Option 2 - Emits equivalent to U.S. EPA Tier 2	U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent	Engine meets Tier 4 Final/Stage V emission standards.	U.S. EPA Tier 4 Final, U.S. EPA Tier 2 Equivalent
Rated Speed	1800 r/min	-	-	1750 rpm
Gross Power - SAE J1995:2014	766 hp	1870 hp	-	-
Net Power - SAE J1349:2011 - Standard Ambient	699 hp	-	-	-
Net Power - SAE J1349:2011 - High Ambient	648 hp	-	-	-
Bore	5.4 in	6.7 in	3.85 in	5.7 in
Stroke	6 in	8.5 in	4.72 in	6.4 in
Displacement	1649.5 in³	4766 in³	220 in³	1963.5 in³
Peak Torque - 1,200 rpm	2624 lb/ft	-	-	-
Torque Rise	18 %	39%	-	-
Note	Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.	-	Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.	-
Engine Power - ISO 14396	-	1847 hp	-	-
Net Power - SAE J1349 - Standard Ambient	-	1739 hp	-	-
Net Power - SAE J1349 - High Ambient	-	1696 hp	-	-
Peak Torque - 1,200 rpm - SAE J1995	-	8549 lb/ft	-	-
Note (1)	-	The power ratings apply when tested under the reference conditions for the specified standard.	-	-
Note (2)	-	The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.	-	-
Note (3)	-	The gross power advertised is with the fan at maximum speed.	-	-
Maximum Gross Power	-	-	110 hp	-
Rated Net Power - Rated Engine Speed	-	-	2200 r/min	-
Maximum Gross Power - Rated Engine Speed	-	-	1800 r/min	-
Rated Net Power - SAE J1349	-	-	99 hp	-
Maximum Gross Power - ISO 14396 (metric)	-	-	112 hp	-
Rated Net Power - ISO 9249	-	-	98 hp	-
Maximum Gross Torque - SAE J1995	-	-	335 ft·lbf	-
Maximum Gross Torque - ISO 14396	-	-	332 ft·lbf	-
Maximum Net Torque - SAE J1349	-	-	329 ft·lbf	-
Maximum Net Torque - ISO 9249	-	-	327 ft·lbf	-
Maximum Gross Power - ISO 14396	-	-	110 hp	-
Net Power	-	-	-	814 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC (Highly Regulated Country) - Standard	-	-	-	900 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	937 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC (Less Regulated Country) - Standard	-	-	-	907 hp
Gross Power - SAE J1995 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	944 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - Standard	-	-	-	884 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	921 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - Standard	-	-	-	893 hp
Gross Power - ISO 14396 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	931 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - Standard	-	-	-	814 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 4/HRC - High Ambient	-	-	-	814 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - Standard	-	-	-	823 hp
Net Power - SAE J1349 at 1,750 rpm - Tier 2/LRC - High Ambient	-	-	-	823 hp
Peak Torque - SAE J1995 - Tier 4/HRC - Standard @ 1,200 rpm	-	-	-	3514 ft·lbf
Peak Torque - SAE J1995 - Tier 4/HRC - High Ambient @ 1,300 rpm	-	-	-	3555 ft·lbf
Peak Torque - SAE J1995 - Tier 2/LRC - Standard @ 1,200 rpm	-	-	-	3537 ft·lbf
Peak Torque - SAE J1995 - Tier 2/LRC - High Ambient @ 1,350 rpm	-	-	-	3570 ft·lbf
Operating Specifications
Operating Weight - Standard	178517 lb	543772 lb	-	-
Bucket Capacity Range	8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)	17.2-43.6 m3 (22.3-57 yd3)	-	11.5-24.5 m³ (15-32 yd³)
Rated Payload - Standard	17.5 ton (US)	-	-	25.5 ton (US)
Rated Payload - High Lift	17.5 ton (US)	-	-	22.5 ton (US)
Cat Truck Match - Standard	773-775	785/789	-	775/777
Cat Truck Match - High Lift	775-777	789/793/794	-	785
Operating Weight - High Lift	-	547675 lb	-	-
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)	-	60 ton (US)	-	-
Rated Payload - Standard Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-
Rated Payload - High Lift (Low to Moderate Digging Resistance)	-	55 ton (US)	-	-
Rated Payload - High Lift (Moderate to High Digging Resistance)	-	50 ton (US)	-	-
Note	-	*Please contact your local dealer to determine if your application is suitable for this increased rated payload.	-	-
Operating Weight	-	-	-	233430 lb
Rated Payload - Standard (Material Handler)	-	-	-	30 ton (US)
Rated Payload - High Lift (Material Handler)	-	-	-	27 ton (US)
Transmission
Transmission Type	Cat planetary power shift	Cat Planetary Power Shift	-	Cat Planetary Powershift
Forward - 1	4.6 mile/h	4.6 mile/h	-	4.3 mile/h
Forward - 2	8.2 mile/h	8 mile/h	-	7.4 mile/h
Forward - 3	14.5 mile/h	13.6 mile/h	-	12.7 mile/h
Reverse - 1	5.1 mile/h	5 mile/h	-	4.7 mile/h
Reverse - 2	9.1 mile/h	8.8 mile/h	-	8.1 mile/h
Reverse - 3	16 mile/h	14.9 mile/h	-	13.9 mile/h
Direct Drive - Forward 1	Lock-up disabled	Lock-up disables	-	Disabled
Direct Drive - Forward 2	8.2 mile/h	8.7 mile/h	-	8 mile/h
Direct Drive - Forward 3	14.5 mile/h	15.2 mile/h	-	14 mile/h
Direct Drive - Reverse 1	5.1 mile/h	Lock-up disables	-	5 mile/h
Direct Drive - Reverse 2	9.1 mile/h	9.6 mile/h	-	8.8 mile/h
Direct Drive - Reverse 3	16 mile/h	16.8 mile/h	-	15.3 mile/h
Note	Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.	Travel speeds based on 58/85-57 tires.	*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.	-
Forward and Reverse - Speed Range 3	-	-	25 mile/h	-
Forward and Reverse - Speed Range 2*	-	-	12.5 mile/h	-
Forward and Reverse - Speed Range 1*	-	-	6.3 mile/h	-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit	Positive flow control	Positive Flow Control	-	Positive Flow Control
Lift/Tilt System	Variable displacement piston	-	-	-
Maximum Flow at 1,800 rpm	240 gpm	-	-	-
Relief Valve Setting - Lift/Tilt	4786 psi	5004 psi	-	5000 psi
Cylinders, Double Acting - Lift, Bore and Stroke	235 mm × 1287 mm (9.3 in × 50.7 in)	370 × 1713 mm (14.6 × 67.4 in)	-	-
Cylinders, Double Acting - Tilt, Bore and Stroke	292.1 mm × 820 mm (11.5 in × 32.3 in)	310 × 1086 mm (12.2 × 42.8 in)	-	-
Pilot System	Open loop and pressure reducing	Open Loop and Pressure Reducing	-	-
Pilot Relief Setting	507 psi	-	-	-
Lift/Tilt System - Pump	-	Variable Displacement Piston	-	Variable Displacement Piston
Maximum Flow at 1,700 rpm Engine Speed	-	541 gpm	-	-
Maximum Flow at 2,165 rpm	-	-	-	250 gpm
Lift Cylinder - Bore	-	-	-	9.3 in
Lift Cylinder - Stroke	-	-	-	63.5 in
Tilt Cylinder - Bore	-	-	-	11.5 in
Tilt Cylinder - Stroke	-	-	-	41.5 in
Hydraulic Cycle Times
Rack Back	4.3 s	4.9 s	-	2.3 s
Raise	8.6 s	12.6 s	-	9 s
Dump	2.9 s	3.1 s	-	2.6 s
Lower	3.7 s	-	-	-
Lower Float Down	3.7 s	4.2 s	-	-
Total Hydraulic Cycle Time - Empty Bucket	13.8 s	-	-	-
Rack Back - High Lift	-	-	-	2.3 s
Raise - High Lift	-	-	-	9 s
Dump - High Lift	-	-	-	2.6 s
Float Down	-	-	-	3.2 s
Float Down - High Lift	-	-	-	3.2 s
Total Hydraulic Cycle Time	-	-	-	17.1 s
Hydraulic System - Steering
Steering System - Circuit	Pilot, load sensing	Pilot, Load Sensing	-	Pilot, Load Sensing
Steering System - Pump	Piston, variable displacement	Piston, Variable Displacement	-	Piston, Variable Displacement
Maximum Flow at 1,400 rpm	96.2 gpm	-	-	-
Relief Valve Setting - Steering	5004 psi	-	-	-
Total Steering Angle	70°	80 degrees	-	80°
Steering Cycle Times - Low Idle	-	7.6 s	-	4.9 s
Steering Cycle Times - High Idle	-	4.3 s	-	3.1 s
Maximum Flow at 1,400-1,850 rpm	-	-	-	70 gpm
Steering Cut Off Pressure	-	-	-	4500 psi
Air Conditioning System
Air Conditioning	• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system c	-	-	-
Axles
Front	Fixed	Fixed	Fixed; Locking differential (standard)	Fixed
Rear	Trunnion	Trunnion	Oscillating ±11 degrees; Locking differential (Standard)	Trunnion
Oscillation Angle	8.5°	9°	-	±9°
Brakes
Brakes	ISO 3450: 2011	ISO 3450:2011	-	ISO 3450:2011
Service Refill Capacities
Fuel Tank	281 gal (US)	-	43.6 gal (US)	385.7 gal (US)
Cooling System	54.9 gal (US)	-	5.7 gal (US)	-
Engine Crankcase	20 gal (US)	-	2.6 gal (US)	-
Transmission	29.1 gal (US)	-	0.8 gal (US)	51.5 gal (US)
Differential - Final Drives - Front	71.6 gal (US)	-	-	96.4 gal (US)
Differential - Final Drives - Rear	68.9 gal (US)	-	-	96.4 gal (US)
Hydraulic System Factory Fill	210 gal (US)	-	-	-
Hydraulic Tank - Implement and Hydraulic Fan	68.9 gal (US)	-	-	-
Hydraulic Tank - Steering and Braking	34.9 gal (US)	-	-	-
Note	Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este	-	DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.	-
Diesel Exhaust Fluid (DEF) Tank	-	-	4.8 gal (US)	-
Hydraulic System - Including Tank	-	-	25.9 gal (US)	-
Hydraulic Tank	-	-	14.5 gal (US)	-
Axles - Front Center Differential	-	-	2 gal (US)	-
Axles - Rear Center Differential	-	-	2 gal (US)	-
Cooling Systems	-	-	-	59.4 gal (US)
Crankcase	-	-	-	31.7 gal (US)
Hydraulic System Factory Fill (Implement)	-	-	-	104.1 gal (US)
Hydraulic Tank - Implement	-	-	-	60.2 gal (US)
Hydraulic Factory Fill (Steering)	-	-	-	32.5 gal (US)
Hydraulic Tank (Steering Tank Only)	-	-	-	26.3 gal (US)
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-
Note (1)	*Sound suppression equipped	-	-	-
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)	116 dB(A)	-	-	-
Operator Sound Pressure Level (ISO 6396:2008)*	72 dB(A)	-	-	-
Machine Sound Power Level (ISO 6395:2008)*	114 dB(A)	-	-	-
Note (1)	*Sound suppression equipped	-	-	-
Note (2)	The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-
Note (3)	The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.	-	-	-
Note (4)	Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.	-	-	-
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS	17.2 ft	-	-	-
Ground to Top of Exhaust Stacks	16.6 ft	-	-	-
Ground to Top of Hood	12.7 ft	-	-	-
Ground to Bumper Clearance	3.5 ft	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	15.4 ft	-	-	-
Wheel Base	15.1 ft	-	-	-
Maximum Overall Length	42.9 ft	-	-	-
Ground to Lower Hitch Clearance	2 ft	-	-	-
Ground to Center of Front Axle	4.2 ft	-	-	-
Clearance at Maximum Lift	7.2 ft	-	-	-
Rack Back Angle at Ground Level	40.4°	-	-	-
Rack Back Angle at Carry	48.8°	-	-	-
B-Pin Height - Maximum Lift	19.7 ft	-	-	-
Maximum Overall Height - Bucket Raised	27.2 ft	-	-	-
Rack Angle at Maximum Lift	63.7°	-	-	-
Dump Angle at Maximum Lift	45°	-	-	-
Reach - Maximum Lift	7.2 ft	-	-	-
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS	17.2 ft	-	-	-
Ground to Top of Exhaust Stacks	16.6 ft	-	-	-
Ground to Top of Hood	12.7 ft	-	-	-
Ground to Bumper Clearance	3.5 ft	-	-	-
Rear Axle - Centerline to Bumper	12.5 ft	-	-	-
Front Axle Centerline to Bucket Tip	17.8 ft	-	-	-
Wheel Base	15.1 ft	-	-	-
Maximum Overall Length	45.3 ft	-	-	-
Ground to Lower Hitch Clearance	2 ft	-	-	-
Ground to Center of Front Axle	4.2 ft	-	-	-
Clearance at Maximum Lift	14.8 ft	-	-	-
Rack Back Angle at Ground Level	39.9°	-	-	-
Rack Back Angle at Carry	49.3°	-	-	-
B-Pin Height - Maximum Lift	21.2 ft	-	-	-
Maximum Overall Height - Bucket Raised	28.7 ft	-	-	-
Rack Angle at Maximum Lift	60.6°	-	-	-
Dump Angle at Maximum Lift	51°	-	-	-
Reach - Maximum Lift	8.5 ft	-	-	-
Note	Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.	-	-	-
Complete System Fill
Fuel Tank - Standard	-	856 gal (US)	-	-
Fuel Tank - With 24 hr Attachment	-	1414 gal (US)	-	-
Cooling System	-	138 gal (US)	-	-
Engine Crankcase	-	76 gal (US)	-	-
Transmission	-	110 gal (US)	-	-
Differential - Final Drives - Front	-	220 gal (US)	-	-
Differential - Final Drives - Rear	-	200 gal (US)	-	-
Hydraulic Tank - Implement and Hydraulic Fan	-	270 gal (US)	-	-
Hydraulic Tank - Steering and Braking	-	100 gal (US)	-	-
Oil Renewal System (ORS)*	-	20 gal (US)	-	-
Note	-	*Not available on Tier 4 Final/Stage V machines. Not available in all regions.	-	-
Cooling System
Ambient Capability Hydraulically Driven Demand Fan - Standard	-	109.4 °F	-	109.4 °F
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)	-	131 °F	-	-
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)	-	127.4 °F	-	-
Ambient Capability, Hydraulically Driven Demand Fan - High	-	-	-	131 °F
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	74 dB(A)	-	-
Machine Sound Level (ISO 6395:2008)	-	119 dB(A)	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-	Machine Sound Level (ISO 6396:2008) - 116 dB(A)
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent	-	73 dB(A)	-	-
Machine Sound Level (ISO 6395:2008)	-	117 dB(A)	-	-
Note	-	The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c	-	Machine Sound Level (ISO 6396:2008) - 113 dB(A)
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift	-	28.8 ft	-	22.8 ft
Clearance at Maximum Lift	-	19.8 ft	-	15.2 ft
Dump Angle at Maximum Lift	-	–50.0 degrees	-	-49.5 degrees
Front Axle Centerline to Bucket Tip	-	21.9 ft	-	18 ft
Ground to Bumper Clearance	-	4.4 ft	-	3.8 ft
Ground to Center of Axles	-	6 ft	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	-	2.2 ft
Ground to Top of Exhaust Stacks	-	23.2 ft	-	17 ft
Ground to Top of Hood	-	18.6 ft	-	13.1 ft
Ground to Top of ROPS	-	23.4 ft	-	18.3 ft
Maximum Overall Height - Bucket Raised	-	39.3 ft	-	30.8 ft
Maximum Overall Length	-	64.6 ft	-	50.8 ft
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-
Rack Angle at Maximum Lift	-	59.5 degrees	-	-
Rack Back Angle - Carry	-	47.7 degrees	-	48.9 degrees
Rack Back Angle - Ground Level	-	39.7 degrees	-	40.2 degrees
Reach - Maximum Lift	-	9.6 ft	-	8.2 ft
Rear Axle - Centerline to Bumper	-	20.4 ft	-	13.5 ft
Tread Width	-	14.1 ft	-	10.83 ft
Wheel Base	-	22.3 ft	-	19.3 ft
Width - Over Tires - With Bulge	-	18.8 ft	-	14.74 ft
Ground to Center of Front Axle	-	-	-	4.3 ft
Rack Back Angle - Maximum Lift	-	-	-	56.9 degrees
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift	-	31.6 ft	-	24.5 ft
Clearance at Maximum Lift	-	22.6 ft	-	17.2 ft
Dump Angle at Maximum Lift	-	–50.0 degrees	-	-48.1 degrees
Front Axle Centerline to Bucket Tip	-	24.2 ft	-	18.8 ft
Ground to Bumper Clearance	-	4.4 ft	-	3.8 ft
Ground to Center of Axles	-	6 ft	-	-
Ground to Lower Hitch Clearance	-	2.9 ft	-	2.2 ft
Ground to Top of Exhaust Stacks	-	23.2 ft	-	17 ft
Ground to Top of Hood	-	18.6 ft	-	13.1 ft
Ground to Top of ROPS	-	23.4 ft	-	18.3 ft
Maximum Overall Height - Bucket Raised	-	42.1 ft	-	32 ft
Maximum Overall Length	-	66.9 ft	-	51.6 ft
Note	-	Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.	-	-
Rack Angle at Maximum Lift	-	59.4 degrees	-	-
Rack Back Angle - Carry	-	53.5 degrees	-	51.6 degrees
Rack Back Angle - Ground Level	-	45 degrees	-	42.5 degrees
Reach - Maximum Lift	-	9.4 ft	-	7.6 ft
Rear Axle - Centerline to Bumper	-	20.4 ft	-	13.5 ft
Tread Width	-	14.1 ft	-	10.83 ft
Wheel Base	-	22.3 ft	-	19.3 ft
Width - Over Tires - With Bulge	-	18.8 ft	-	14.75 ft
Rack Back Angle - Maximum Lift	-	-	-	56.2 degrees
Ground to Center of Front Axle	-	-	-	4.3 ft
Weights
Operating Weight	-	-	18102 lb	-
Buckets
Bucket Capacities	-	-	1.3-3.5 m3 (1.7-4.6 yd3)	11.5-24.5 m³ (15-32 yd³)
Bucket Capacities - General Purpose	-	-	1.3-1.9 m³ (1.7-2.5 yd³)	-
Bucket Capacities - Light Material	-	-	2.5-3.5 m³ (3.3-4.6 yd³)	-
Sustainability
Recyclability	-	-	95%	-
Cab
ROPS	-	-	ISO 3471:2008	-
FOPS	-	-	ISO 3449:2005	-
Note (2)	-	-	The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).	-
Note (3)	-	-	The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).	-
Note (1)	-	-	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.	-
Note (4)	-	-	*The measurements were conducted with the cab doors and windows closed.	-
Steering
Maximum Working Pressure - Steering Pump	-	-	2683 psi	-
Steering Articulation Angle - Each Direction	-	-	40 °	-
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed	-	-	3.2 s	-
Maximum Flow - Steering Pump	-	-	17 gpm	-
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left	-	-	3.75 turns	-
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach	-	-	1.4 s	-
Hydraulic Cycle Time - Total Cycle Time	-	-	12.5 s	-
Maximum Working Pressure - Implement Pump	-	-	3408 psi	-
Relief Pressure - Tilt Cylinder	-	-	4931 psi	-
Hydraulic Cycle Time - Rackback	-	-	2.2 s	-
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure	-	-	3046 psi	-
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift	-	-	5.2 s	-
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure	-	-	3046 psi	-
Maximum Flow - Implement Pump - 4th Function, Maximum Flow	-	-	24 gpm	-
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow	-	-	24 gpm	-
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level	-	-	3.7 s	-
Maximum Flow - Implement Pump	-	-	32 gpm	-
Tires
Note (2)	-	-	In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.	-
Standard Size	-	-	15.5 R25 L2 XTLA	-
Other Choices Include	-	-	17.5 R25 L2 XTLA; 15.5 R25 L3 XHA2; 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow	-
Note (3)	-	-	Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.	-
Note (1)	-	-	Other tire choices are available. Contact your Cat dealer for details.	-

Compare Equipment Go Back

990 Wheel Loader

995 Wheel Loader

910 Compact Wheel Loader

992 Wheel Loader

Engine

Operating Specifications

Transmission

Hydraulic System - Lift/Tilt

Hydraulic Cycle Times

Hydraulic System - Steering

Air Conditioning System

Axles

Brakes

Service Refill Capacities

Sound Performance - Tier 4 Final / Stage V

Sound Performance - Tier 2

Dimensions (Approximate) - Standard Lift Linkage

Dimensions (Approximate) - High Lift Linkage

Complete System Fill

Cooling System

Sound Performance - Standard

Sound Performance - Suppression

Dimensions - Standard Lift - Approximate

Dimensions - High Lift - Approximate

Weights

Buckets

Sustainability

Cab

Steering

Loader Hydraulic System

Tires

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us